贵州关岭生物群中植物化石的发现及其意义

关岭生物群是近年来在我国贵州关岭地区瓦窑组中发现的一个十分重要的生物群 ,其中的植物化石经研究计有 Equisetites cf.arenaceus(Jaeger) Bronn.、Ctenozamitessarrani Zeiller。依据植物化石 C.sarrani常见于晚三叠世和 E.cf.arenaceus系似木贼属中较古老的类型 ,指出含植物化石的地层时代为晚三叠世卡尼期。瓦窑组系海相沉积 ,其中的植物化石无疑为异地埋藏 ,但从化石通常保存尚好来看 ,估计搬运的距离不会很远 ,它们可能是从距海岸不远的陆地被河流带到较平静的海湾或海槽而沉积下来的。此外 ,从该组植物茎干化石具清楚的年轮分析 ,推测卡尼期时 ,贵州关岭一带为非热带雨林地区 ,一年中气候不是四季如一 ,而是有明显的季节变化     

国际冰芯与气候环境研究新进展--关于国际"冰芯与气候"会议

2001年8月19～23日, 在格陵兰举行了规模空前的"冰芯与气候"国际盛会, 会议展示了冰芯与气候环境研究的最新进展. 文中介绍这次会议并概括了近年来的主要研究进展. 与南北极地区的冰芯研究相比, 中低纬度地区冰芯研究是近年来国际冰芯研究中发展最快的. 在这一研究中, 中国科学家做出了重要贡献并得到了国际同行的高度评价.     

运用层序不对称性分析海平面变化特征

目前研究海平面变化的方法尚不能精确确定海平面变化，对记录海平面变化的沉积体或层序物质组成及结构特点的研究尚显薄弱。在分析层序不对称性与海平面变化的关系基础，提出层序不对称系数S0，认为海平面的升降变化对浅水沉积区影响显著，其结果必然造成层序S0的增加；海平面的升降变化对沉水沉积区影响不大，层序S0较为恒定。对进行详细研究中扬子区S0分布特点，运用S0曲线计算了中扬子区海平面变化特点，并与其他方法进行对比，认为可以用S0判断水体相对深浅，分析海平面变化。     

Far field effects of Alpine plate tectonism in the Iberian microplate recorded by fault-related denudation in the Spanish Central System

Apatite fission track analysis was performed on 56 samples from central Spain to unravel the far field effects of the Alpine plate tectonic history of Iberia. The modelled thermal histories reveal complex cooling in the Cenozoic, indicative of intermittent denudation. Accelerated cooling events occurred across the Spanish Central System (SCS) from the Middle Eocene to Recent. These accelerated cooling events resulted in up to 2.8±0.9 km of denudation in the western Sierra de Gredos and 3.6±1.0 km in the central and eastern Gredos (assuming a paleogeothermal gradient of 28±5 °C and a surface temperature of 10 °C). The greatest amount of denudation (5.0±1.6 km) occurred in the Sierra de Guadarrama. Accompanying rock uplift was 4.7±1.0 and 5.9±1.6 km in the eastern Gredos and Guadarrama, respectively. Most denudation in the Gredos occurred from the Middle Eocene to the Early Miocene and can be related to the N–S stress field, induced by the Pyrenean compression. In the Guadarrama, the greatest denudation was Pliocene to Recent of age and seems related to the ongoing NW–SE Betic compression. The fact that the formation of the E–W trending Gredos coincides with the N–S Pyrenean compression and the creation of the present day morphology of the NE–SW trending Guadarrama with the younger NW–SE Betic compression, indicates that they record the far field effects of Alpine plate tectonics on Iberia. The trend of pre-existing lineaments was of major importance in influencing the style and magnitude of these of far field effects.     

Sludge weathering and mobility of contaminants in soil affected by the Aznalcollar tailing dam spill (SW Spain)

As a result of the collapse of the Aznalcollar mine tailings dam, a large extension of the Guadiamar valley in SW Spain was covered with a layer of pyrite sludge. Although most of the sludge was removed, a small amount remains in the soil, constituting a potential source of water pollution. A column experiment was carried out in order to determine the rate of sludge oxidation in the soil, and the existence of metal retention processes. The column was filled with a mixture of sludge and a sandy soil common in the region. At different time intervals, the column was leached with water and the resulting solution analysed.

The pH of the water dropped to values around 2 after 260 days and then remained constant due to the buffering role of silicate dissolution. The concentration of Zn, Cd and Co in the leachates matched the expected values from flow-through experiments at atmospheric oxygen pressure. This indicates that oxygen diffusion in the pores was complete. Moreover, no efficient processes existed for retaining Zn, Cd and Co, which formed soluble salts and were entirely incorporated into the infiltrating water. During the first 2 months of the experiment, when pH was higher than 4.5, the concentrations of Fe and Al were very low. Saturation indices showed that the solution was in equilibrium with amorphous Fe(OH)₃ and Al(OH)₃. Subsequently, at lower pH values, jarosite [(Na,K)Fe₃(SO₄)₂(OH)₆] formed. This solid phase was identified by X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). Jarosite was also responsible for the depletion of As, Pb, Sb and probably Tl in the water resulting from infiltration.     

Generation of mid-ocean ridge basalts at pressures from 1 to 7 GPa

We propose a model for the generation of average MORBs based on phase relations in the CaO-MgO-Al₂O₃-SiO₂-CO₂ system at pressures from 3 to 7 GPa and in the CaO-MgO-Al₂O₃-SiO₂-Na₂O-FeO (CMASNF) system at pressures from ∼0.9 to 1.5 GPa. The MELT seismic tomography (Forsyth et al., 2000) across the East Pacific Rise shows the largest amount of melt centered at ∼30-km depth and lesser amounts at greater depths. An average mantle adiabat with a model-system potential temperature (T_p) of 1310°C is used that is consistent with this result. In the mantle, additional minor components would lower solidus temperatures ∼50°C, which would lower T_p of the adiabat for average MORBs to ∼1260°C. The model involves generation of carbonatitic melts and melts that are transitional between carbonatite and kimberlite at very small melt fractions (<0.2%) in the low-velocity zone at pressures of ∼2.6 to 7 GPa in the CMAS-CO₂ system, roughly the pressure range of the PREM low-velocity zone. These small-volume, low-viscosity melts are mixed with much larger volumes of basaltic melt generated at the plagioclase-spinel lherzolite transition in the pressure range of ∼0.9 to 1.5 GPa.In this model, solidus phase relations in the pressure range of the plagioclase-spinel lherzolite transition strongly, but not totally, control the major-element characteristics of MORBs. Although the plagioclase-spinel lherzolite transition suppresses isentropic decompression melting in the CMAS system, this effect does not occur in the topologically different and petrologically more realistic CMASNF system. On the basis of the absence of plagioclase from most abyssal peridotites, which are the presumed residues of MORB generation, we calculate melt productivity during polybaric fractional melting in the plagioclase-spinel lherzolite transition interval at exhaustion of plagioclase in the residue. In the CMASN system, these calculations indicate that the total melt productivity is ∼24%, which is adequate to produce the oceanic crust. The residual mineral proportions from this calculation closely match those of average abyssal peridotites.Melts generated in the plagioclase-spinel lherzolite transition are compositionally distinct from all MORB glasses, but do not have a significant fractional crystallization trend controlled by olivine alone. They reach the composition field of erupted MORBs mainly by crystallization of both plagioclase and olivine, with initial crystallization of either one of these phases rapidly joined by the other. This is consistent with phenocryst assemblages and experimental studies of the most primitive MORBs, which do not show an olivine-controlled fractionation trend. The model is most robust for the eastern Pacific, where an adiabat with a T_p of ∼1260°C is supported by the MELT seismic data and where the global inverse correlation of (FeO)₈ with (Na₂O)₈ is weak. Average MORBs worldwide also are well modeled. A heterogeneous mantle consisting of peridotite of varying degrees of major-element depletion combined with phase-equilibrium controls in the plagioclase-spinel lherzolite transition interval would produce the form of the global correlations at a constant T_p, which suggests a modest range of T_p along ridges. Phase-composition data for the CMASNF system are presently not adequate for quantitative calculation of (FeO)₈-(Na₂O)₈-(CaO/Al₂O₃)₈ systematics in terms of this model. The near absence of basalts in the central portion of the Gakkel Ridge suggests a lower bound for T_p along ridges of ∼1240°C, a potential temperature just low enough to miss the solidus for basalt production at ∼0.9 GPa. An upper bound for T_p is poorly constrained, but the complete absence of picritic glasses in Iceland and the global ridge system suggests an upper bound of ∼1400°C. In contrast to some previous models for MORB generation that emphasize large potential temperature variations in a relatively homogeneous peridotitic mantle, our model emphasizes modest potential temperature variations in a peridotitic mantle that shows varying degrees of heterogeneity. Calculations indicate that melt productivity changes from 0 to 24% for a change in T_p from 1240 to 1260°C, effectively producing a rapid increase to full crustal thickness or decrease to none as ridges appear and disappear.     

The El Salvador earthquakes of January and February 2001: context, characteristics and implications for seismic risk

The small Central American republic of El Salvador has experienced, on average, one destructive earthquake per decade during the last hundred years. The latest events occurred on 13 January and 13 February 2001, with magnitudes M_w 7.7 and 6.6, respectively. The two events, which were of different tectonic origin, follow the patterns of the seismicity of the region although neither event has a known precedent in the earthquake catalogue in terms of size and location. The earthquakes caused damage to thousands of traditionally built houses and triggered hundreds of landslides, which were the main causes of fatalities. The earthquakes have clearly demonstrated trends of increasing seismic risk in El Salvador due to rapid population expansion in areas of high shaking and landslide hazard, exacerbated by deforestation and uncontrolled urbanisation. The institutional mechanisms required for the control of land use and building practice are very weak and present a major obstacle to risk mitigation.     

Modes of raising northeastern Tibet probed by explosion seismology

New wide-angle reflection and refraction seismic data provide constraints on the structure of the upper lithosphere, and test models of its evolution to raise the northeastern part of the Tibetan Plateau. Amplitudes observed for reflections from the crust-mantle boundary are sufficiently large to suggest that there is no significant partial melt in the deep crust. The data show an increase of the crustal thickness between terranes from north of the Kun Lun Fault into the Qang Tang of central Tibet, and a contrast among their intracrustal images and compositions. In the north, P and S velocities are consistent with a dominantly felsic composition and show that only the upper crust thickened. South of the Kun Lun Fault a thicker crust made of two layers could result from the superposition of the originally thin crust of the Bayan Har terrane on the lower part of the crust of the domain to the north, which upper crust it shoved and thickened. Different modes of crustal thickening, either by thickening of individual layers or superpositions and imbrication among them appear to work jointly to raise the topography.     

Development of site-specific design ground motions in Western and Eastern North America

This paper presents results recently obtained for generating site-specific ground motions needed for design of critical facilities. The general approach followed in developing these ground motions using either deterministic or probabilistic criteria is specification of motions for rock outcrop or very firm soil conditions followed by adjustments for site-specific conditions. Central issues in this process include development of appropriate attenuation relations and their uncertainties, differences in expected motions between Western and Eastern North America, and incorporation of site-specific adjustments that maintain the same hazard level as the control motions, while incorporating uncertainties in local dynamic material properties. For tectonically active regions, such as the Western United States (WUS), sufficient strong motion data exist to constrain empirical attenuation relations for M up to about 7 and for distances greater than about 10–15 km. Motions for larger magnitudes and closer distances are largely driven by extrapolations of empirical relations and uncertainties need to be substantially increased for these cases.

For the Eastern United States (CEUS), due to the paucity of strong motion data for cratonic regions worldwide, estimation of strong ground motions for engineering design is based entirely on calibrated models. The models are usually calibrated and validated in the WUS where sufficient strong motion data are available and then recalibrated for applications to the CEUS. Recalibration generally entails revising parameters based on available CEUS ground motion data as well as indirect inferences through intensity observations. Known differences in model parameters such as crustal structure between WUS and CEUS are generally accommodated as well. These procedures are examined and discussed.     

山西北部至晋冀蒙交界地区几次中强地震前4.0级地震活动的研究

对山西北部至晋冀蒙交界地区中强地震前的 4 .0级地震进行了研究 ,得出其特征为异常增强—异常平静—信号地震的结论 ,认为该区某些 4 .0级地震活动似可作为某些中强地震的前兆地震而进行进一步的研究。