危化品泄漏扩散预测模型与GIS集成及其在应急决策中的应用研究

在研究和分析危化品泄漏扩散预测模型的基础上,将危化品泄漏扩散快速预测模型在应急平台中与GIS系统进行集成,实现危化品泄漏扩散过程在地理场景中的动态仿真推演,在模型库、预案库的支持下,利用空间分析技术辅助应急决策,生成应急指挥决策方案。     

境外桩基工程的施工实践

通过对支援柬埔寨、几内亚桩基工程的施工实践,总结出在境外工程项目的管理中,要制定相应的管理制度与突发事件的应急预案,在施工过程中要注意政局变化,加强卫生疾病的防治,进行必要的物质储备和规避风险等注意事项及解决方法．对地勘单位拓展海外市场提出了建设性意见,具有一定的借鉴意义。     

热液脉动与岩浆涌动控制机理浅论

热液脉动与岩浆涌动的控制机理,是基础地质理论所涉及的两个重要议题。本文首先对当今流行的构造控制机理提出了质疑,其后借助＂间歇喷泉＂原理和＂吹气球＂机制,分别对热浪的脉动和岩浆的涌动进行了必要的探讨。     

中国南方离子吸附型稀土矿床成矿类型及其母岩控矿因素探讨

传统认为中国南方的离子吸附型稀土矿床可划分为以“足洞式”为代表的重稀土型和以“河岭式”(或“花山式”)为代表的轻稀土型两种矿化类型。然而，近年来发现的许多矿床(如清溪、寨背和馒头山等)的赋矿风化壳中出现了轻稀土矿与重稀土矿并存现象，表现出特殊的“上轻下重”双层矿体结构。这指示了除重稀土型和轻稀土型之外，还存在着轻重稀土共生型的过渡类型。本研究通过对三种不同成矿类型的若干典型矿床系统对比，指出成矿类型的多样性与母岩性质密切相关，尤其是母岩的稀土元素地球化学和稀土载体矿物属性是制约成矿类型变化的关键因素。统计数据表明，从重稀土型→轻重稀土共生型→轻稀土型，成矿母岩的全岩稀土总量变化不大(ΣREY: 200×10-6~450×10-6→200×10-6~500×10-6→200×10-6~800×10-6)，但轻重稀土配分值出现较显著的区间性差异(ΣLREE/ΣHREY: 02~1→1~5→2~10)。与之同时，母岩中能为离子相稀土提供物源且具有重稀土配分属性的稀土副矿物类型和数量明显减少，这与全岩稀土元素地球化学特征中重稀土分量占比的降低趋势也互相匹配。该结果指示，以往认为重稀土配分母岩形成重稀土矿床、轻稀土配分母岩形成轻稀土矿床的传统观点需要外延，即一部分具有低度轻稀土配分属性(1＜ΣLREE/ΣHREY＜5)且含有丰富易风化稀土副矿物的母岩还可能形成轻重稀土共生型矿床，该认识可为今后离子吸附型稀土矿床勘查工作提供新的找矿依据。     

Structure and oscillations in quiescent filaments from observations in He i λ10830 å

Observations of two quiescent filaments show oscillatory variations in Doppler shift and central intensity of the He i 10830 Å line.The oscillatory periods range from about 5 to 15 min, with dominant periods of 5, 9, and 16 min. The 5-min period is also detected in the intensity variations, after correction for atmospheric effects. Doppler shifts precede intensity variations by about one period. The possibility that the oscillations are Alfvén waves is discussed.The Doppler signals of the filament form fibril-like structures. The fibrils are all inclined at an angle of about 25° to the long axis of the filament. The magnetic field has a similar orientation relative to the major direction of the filament, and the measured Doppler signals are apparently produced by motions along magnetic flux tubes threading the filament.The measured lifetimes of the small-scale fibrils of quiescent disk filaments are very likely a combined effect of intensity modulations and reshuffling of the structures.     

Study on the kinetics of iron oxide leaching by oxalic acid

The presence of iron oxides in clay or silica raw materials is detrimental to the manufacturing of high quality ceramics. Although iron has been traditionally removed by physical mineral processing, acid washing has been tested as it is more effective, especially for extremely low iron (of less than 0.1% w/w). However, inorganic acids such as sulphuric or hydrochloric acids easily contaminate the clay products with SO₄²⁻ and Cl⁻, and therefore should be avoided as much as possible. On the other hand, if oxalic acid is used, any acid left behind will be destroyed during the firing of the ceramic products. The characteristics of dissolution of iron oxides were therefore investigated in this study.The dissolution of iron oxides in oxalic acid was found to be very slow at temperatures within the range 25–60 °C, but its rate increases rapidly above 90 °C. The dissolution rate also increases with increasing oxalate concentration at the constant pH values set within the optimum range of pH2.5–3.0. At this optimum pH, the dissolution of fine pure hematite (Fe₂O₃) (105–140 μm) follows a diffusion-controlled shrinking core model. The rate expression expressed as 1 − (2 / 3)x − (1 − x)^2 / 3 where x is a fraction of iron dissolution was found to be proportional to [oxalate]^1.5.The addition of magnetite to the leach liquor at 10% w/w hematite was found to enhance the dissolution rate dramatically. Such addition of magnetite allows coarser hematite in the range 0.5–1.4 mm to be leached at a reasonable rate.     

Effect of polypropylene fibre and lime admixture on engineering properties of clayey soil

In order to reduce the brittleness of soil stabilized by lime only, a recent study of a newly proposed mixture of polypropylene fibre and lime for ground improvement is described and reported in the paper. To investigate and understand the influence of the mixture of polypropylene fibre and lime on the engineering properties of a clayey soil, nine groups of treated soil specimens were prepared and tested at three different percentages of fibre content (i.e. 0.05%, 0.15%, 0.25% by weight of the parent soil) and three different percentages of lime (i.e. 2%, 5%, 8% by weight of the parent soil). These treated specimens were subjected to unconfined compression, direct shear, swelling and shrinkage tests. Through scanning electron microscopy (SEM) analysis of the specimens after shearing, the improving mechanisms of polypropylene fibre and lime in the soil were discussed and the observed test results were explained. It was found that fibre content, lime content and curing duration had significant influence on the engineering properties of the fibre–lime treated soil. An increase in lime content resulted in an initial increase followed by a slight decrease in unconfined compressive strength, cohesion and angle of internal friction of the clayey soil. On the other hand, an increase in lime content led to a reduction of swelling and shrinkage potential. However, an increase in fibre content caused an increase in strength and shrinkage potential but brought on the reduction of swelling potential. An increase in curing duration improved the unconfined compressive strength and shear strength parameters of the stabilized soil significantly. Based on the SEM analysis, it was found that the presence of fibre contributed to physical interaction between fibre and soil whereas the use of lime produced chemical reaction between lime and soil and changed soil fabric significantly.     

高校自然地理实践教学改革探讨

从现代自然地理学综合性和应用性的特点出发,结合自然地理教学现状,分析了自然地理实践教学改革的必要性。阐述了加强实践教学应遵循的基本原则。提出了改革的主要途径,即调整课程内容,优化自然地理课程体系;创新实践教学手段和方法;营造良好的学术氛围和加强横向科研合作。