相控建模技术在羊二庄油田的应用

羊二庄油田的明馆储层非均质性严重,高含水、高开发后期的剩余油分布比较复杂,第一次油藏描述中应用传统的确定性建模方法已经不能满足剩余油挖潜的需要.采用RMS相控建模软件,通过构造建模、沉积微相建模、储层物性建模,建立羊二庄油田三维可视化相控地质模型,并实现了与数模软件的无缝接口.     

基于光谱和纹理的SVM矿化蚀变信息提取研究

针对传统矿化信息提取方法单一,利用光谱或纹理、信息量相对较少、需要大量样本的缺陷,利用基于光谱和纹理的支持向量机(SVM)原理,建立矿化信息提取模型.选择青海泽库县析界日地区作为典型研究区.首先提取研究区光谱和纹理信息,选取训练样本;然后求解最优超平面,进而确定决策函数;最后泛化推广识别其他待识别的样本.通过所提取的遥感蚀变异常信息与重砂异常点叠加分析,叠加基本吻合;从野外实地验证来看,均发现了不同程度的矿化现象,并指出了5个重点异常区.     

基于立体相机的三维场景建模

提出一种基于立体相机的三维场景快速自动建模的方法。首先研制一个数据获取硬件系统,即立体相机系统,通过该系统同时获取被摄物体的三幅影像,进而建立局部模型,并利用一种整体平差优化的方法,将所有的局部模型统一到一个坐标系下,最终建立整个场景的三`维模型。实验结果表明,该方法具有同激光扫描相同的功效,但是成本较低。另外,由于它是基于影像的,纹理数据可以从原始影像中提取,所以可以方便快捷地建立逼真的三维场景模型。     

遥感技术在地质找矿中的应用及发展前景

遥感技术作为矿产勘查的一种手段应用于找矿,并取得了一定成就.遥感技术的直接应用是蚀变遥感信息的提取,遥感技术的间接应用包括地质构造信息、植被的光谱特征及矿床改造信息等方面.遥感找矿具有很大的发展前景的领域主要有:高光谱数据、数据融合技术、3S的紧密结合、计算机技术的发展.     

Research Advances and Exploration Significance of Large-area Accumulation of Low and Medium Abundance Lithologic Reservoirs

In recent years, a series of large low and medium abundance oil and gas fields are discovered through exploration activities onshore China, which are commonly characterized by low porosity-permeability reservoirs, low oil/gas column height, multiple thin hydrocarbon layers, and distribution in overlapping and connection, and so on. The advantageous conditions for large-area accumulation of low-medium abundance hydrocarbon reservoirs include： （1） large （fan） delta sandbodies are developed in the hinterland of large flow-uncontrolled lake basins and they are alternated with source rocks extensively in a structure like ＂sandwiches＂; （2） effective hydrocarbon source kitchens are extensively distributed, offering maximum contact chances with various sandbodies and hydrocarbon source rocks; （3） oil and gas columns are low in height, hydrocarbon layers are mainly of normal-low pressure, and requirements for seal rock are low; （4） reservoirs have strong inheterogeneity and gas reservoirs are badly connected; （5） the hydrocarbon desorption and expulsion under uplifting and unloading environments cause widely distributed hydrocarbon source rocks of coal measures to form large-area reservoirs; （6） deep basin areas and synclinal areas possess reservoir-forming dynamics. The areas with great exploration potential include the Paleozoic and Mesozoic in the Ordos Basin, the Xujiahe Formation in Dachuanzhong in the Sichuan basin, deep basin areas in the Songliao basin etc. The core techniques of improving exploration efficiency consist of the sweetspot prediction technique that focuses on fine characterization of reservoirs, the hydrocarbon layer protecting and high-speed drilling technique, and the rework technique for enhancing productivity.     

A New Female Cone, Araucaria beipoiaoensis sp. nov. from the Middle Jurassic Tiaojishan Formation, Beipiao, Western Liaoning, China and Its Evolutionary Significance

A new species of Araucaria, Araucaria beipiaoensis sp. nov., collected from the Middle Jurassic Tiaojishan Formation, southern hill of Shebudai village, near Beipiao city, western Liaoning is based on a permineralized female cone, which is ovate to elliptical in shape, about 11 cm × 7 cm × 4.5 cm in size. The cone bears rhomboid bracts that are spirally attached, texture thicker, with wings on both sides, with a detached lamina-like apex at the tip. In inner structure the ovuliferous scales are thicker and fused with bracts at the end with a ligular sulcns. There is one wingless ovule/seed per seed-scale complex embedded in the ovuliferous scale tissue, with the micropyle directed toward the cone axis. The ovules/seeds are long ovate or elliptical in shape, 1 cm long and near the base about 3 mm in diameter; the ovule/seed integuments have begun differentiation into 3 layers： the sarcotesta, sclerotesta, and endotesta. The nucellus is free from the enclosing integuments except in the chalazal region where it is fused to the inner layer （endotesta） of integument. Some ovules show cellularized nucellar tissue. Mature seeds exhibit the papery-thin wavy nucellus characteristically near to the micropyle. The embryonic tissue appears to be four cotyledons. The morphology and structure of the cone shows a close relationship to the araucarian cones of fossil and living genera but differs from any known species. The new species is distributed in the Middle Jurassic of the northern hemisphere, especially Asia, and has important significance for the evolution of the Family Araucariaceae.     

Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

Application of Spectral Decomposition to Detection of Fracture-Cavity Carbonate Reservoir Beds in the Tahe Oiifieid, Tarim Basin, NW China

Ordovician fracture-cavity carbonate reservoir beds are the major type of producing formations in the Tahe oilfield, Tarim Basin. The seismic responses of these beds clearly changes depending on the different distance of the fracture-cavity reservoir bed from the top of the section. The seismic reflection becomes weak or is absent when the fracture-cavity reservoir beds are less than 20 ms below the top Ordovician. The effect on top Ordovician reflection became weaker with deeper burial of fracture-cavity reservoir beds but the developed deep fracture-cavity reservoir beds caused stronger reflection in the interior of the Ordovician. This interior reflection can be divided into strong long-axis, irregular and bead string reflections, and was present 80 ms below the top Ordovician. Aimed at understanding reflection characteristics, the spectral decomposition technique, which uses frequency to ＂tune-in＂ bed thickness, was used to predict Ordovician fracture-cavity carbonate formations in the Tahe oilfield. Through finely adjusting the processing parameters of spectral decomposition, it was found that the slice at 30 Hz of the tuned data cube can best represent reservoir bed development. Two large N-S-trending strong reflection belts in the mid-western part of the study area along wells TK440- TK427-TK417B and in the eastern part along wells TK404-TK409 were observed distinctly on the 30 Hz slice and 4-D time-frequency data cube carving. A small N-S trending reflection belt in the southern part along wells T403-TK446B was also clearly identified. The predicted reservoir bed development area coincides with the fracture-cavities connection area confirmed by drilling pressure testing results. Deep karst cavities occur basically in three reservoir bed-development belts identified by the Ordovician interior strong reflection. Spectral decomposition proved to be a useful technique in identifying fracture-cavity reservoir beds.     

Early Uplift History of the Tibetan Plateau:Records from Paleocurrents and Paleodrainage in the Hoh Xil Basin

Paleocurrent indicator data collected in field work were used to study the early Cenozoic regional paleodrainage patterns in the Hob Xil basin in northern Tibetan plateau. The paleocurrent directions of the Eocene Fenghuoshan Group obviously show that the flows were northward with a unidirectional dispersal pattern. This probably reflects the uplift of the Qiangtang terrain during the initial basin deposition period and indicates that the Tanggula Moutains occurred as topographic highlands at least in the Eocene. Paleoflows of the Oligocene Yaxicuo Group were dominantly oriented to the north and then flowed eastwards during its late deposition. This regional variability of paleodrainage patterns of the Yaxicuo Group is interpreted to record the dispersal style of sediments from transverse rivers to longitudinal river systems. It is inferred that the Oligocene uplift of the Kunlun Mountains obstructed by northward paleoflows and created longitudinal river systems parallel to the orogenic belts. The temporal and spatial changes of the paleodrainage patterns suggest that the northern boundary of the Tibetan plateau during the early Cenozoic was situated in the Hoh Xil area and its uplift has progressed northwards through time.