CHARACTERISTICS OF ATMOSPHERIC HEAT SOURCE ASSOCIATED WITH THE SUMMER MONSOON ONSET OVER THE SOUTH CHINA SEA AND THE POSSIBLE MECHANISM RESPONSIBLE FOR ITS LATE OR EARLY ONSET

The characteristics of atmospheric heat source associated with the summer monsoon onset in the South China Sea (SCS) are studied using ECMWF reanalysis data from 1979 to 1993. A criterion of the SCS summer monsoon onset is defined by the atmospheric hea…     

Typical basin-fill sequences and basin migration in Yanshan, North China--Response to Mesozoic tectonic transition

Basin-fill sequences of Mesozoic typical basins in the Yanshan area, North China may be divided into four phases, reflecting lithosphere tectonic evolution from flexure (T3), flexure with weak rifting (J1+2), tectonic transition (J3), and rifting (K). Except the first phase, the other three phases all start with lava and volcaniclastic rocks, and end with thick coarse clastic rocks and/or conglomerates, showing cyclic basin development rather than simple cyclic rift mechanism and disciplinary basin-stress change from extension to compression in each phase. Prototype basin analysis, based on basin-fill sequences, paleocurrent distribution and depositional systems, shows that single basin-strike and structural-line direction controlling basin development had evidently changed from east-west to northeast in Late Jurassic in the Yanshan area, although basin group still occurred in east-west zonal distribution. Till Early Cretaceous, main structural-line strike controlling basins just turned to northeast by north in the studied area.     

Structural features and petroleum geology of the fold-thrust belt in the southern Tarim basin, China

The west Kunlun fold-thrust belt (WKFTB) and the Altun fold-thrust belt (AFTB) are respectively located in the southern margin of the Tarim basin, NW China. The analyses of typical structures and regional dynamics of the fold-thrust belts reveal their different structural and petroleum features and mechanisms. WKFTB differs from AFTB by abundant fault-related folds and triangles zones, and was formed by northward extrusion of the west Kunlun orogen. AFTB was affected synchronously by northward extrusion of the Altun orogen and the sinistral strike-slipping of the Altun Fault, so it is characterized by the minor scale and the monotonous structural styles. The Aqike anticline and the Aqike fault, of which the strikes are orthogonal to the strike of the fold-thrust belts, are regarded as the adjustive structures between both of the fold-thrust belts. The oil-gas pools of WKFTB develop mainly in the faulted-related anticline traps, but the oil-gas pools of AFTB develop mainly in the low fault-block and anticlines traps related with the paleo-uplifts. There are different exploration countermeasures for both of the fold-thrust belts.     

Development of joints and shear fractures in the Kuqa depression and its implication to regional stress field switching

The superimposed basin must have undergone the changes of regional stress field. Study on the nature and switch of regional stress field of superimposed basin is very useful to understanding its stress state and tectonic events during its formation and evolution. As sensitive markers of small stress changes, joint and shear fracture, characterized by consistency of orientation over wide area, can be used to reconstruct paleostress state and its evolution. Detailed observations and analysis on the orientations, geometrical patterns, sequences of joints and shear fractures and their chronological relation to faults and folds show that, the NEE-SWW systematic joints and NNW-SSE systematic joints developed in the Mesozoic and Cenozoic strata are much more prominent than NW-SE systematic joints and shear fractures with different orientations. And the NWW-SEE and NW-SE systematic joints formed later than NEE-SWW systematic joints but earlier than shear fractures with different orientations. According to the relationships between joint and shear fractures and stress, the NEE-SWW systematic joints are inferred to result from lateral weak extension caused by the late Cretaceous regional uplift, while the NNW-SSE and NW-SE systematic joints are interpreted as syn-tectonic deformation relating to strong N-S compression in the Neogene. But some conjugate shear fractures occur probably due to sinistral strike-slip faulting in the Kuqa depression. At the beginning of the Neogene, the stress field changed and the maximal principal stress σ1 switched from vertical to horizontal.     

天山山区近40a年降水变化特征与南、北疆的比较

本文分析了天山山区近40 a来年降水变化的基本特征，并与南疆、北疆进行了比较，所得的主要结果如下：(1)天山山区在年降水量干湿变化阶段上与北疆的相似性强于南疆。(2)年降水量的空间分布的同步变化性以北疆为最好，南疆最差，天山山区居中，而年降水量的空间分布的反向变化性，以天山山区为最大，北疆最小，南疆居中。(3)天山山区与南疆从60年代到90年代，年降水均表现出了持续的增加的趋势，北疆年降水从60年代到90年代，除70年代外，不断增多。     

运用改进系统建模法对南海气象数据的建模研究

在系统建模理论的基础上,运用改进的动态数据建模方法,对南海气象数据中的温度进行建模并验证了模型的适用性.根据模型推导出格林函数、逆函数和自协方差函数等,并讨论了南海气象数据中温度模型的稳定性、可逆性和合理性.对系统的频率特性和谱函数进行分析讨论,并给出建模过程中的一些图像.根据模型的适用性检验发现,对所研究的气象数据而言,ARMA(4, 3)模型是最合适的,具有平稳可逆性.所有的建模和分析过程在MATLAB上实现.实验结果表明这种建模方案简便易行,能够快速准确地确定系统的合理模型.     

GPS水汽遥感中的大气干延迟局地订正模型研究

在GPS遥感水汽过程中,大气干延迟模型的精度直接影响水汽遥感的精度。根据广东清远站1995～2001年的气象探空资料,计算了GPS水汽测量中的实际大气干延迟。在此资料基础上,利用地面气象要素建立了大气干延迟的年和分月局地订正模型。分析结果表明,年模型的精度优于目前广泛使用的普适模型;月模型与年模型相比,效果不是很明显,建立局地分月订正模型意义不大;在对高度角的敏感程度上,局地模型略大些;当高度角小于75时,大气干延迟弯曲路径与直线路径之差ΔS随天顶角增大而迅速增大。     

用远场辐射场反演云闪放电参数

用地面电磁场遥感闪电放电参数无论是在实际应用还是理论研究中都具有重要意义。文中基于电流传输线模式 ,提出了一种用单站远场VLF/LF辐射场反演云内放电参数的简便方法。当传输线电流从底部传播到顶部的时间只有几微秒时 ,整个传输线的VLF/LF辐射可以近似成偶极子辐射 ,即远场辐射场与电流的时间变化率和传输线长度的乘积成正比。因此 ,对远场辐射场做时间积分就能获得完整的电流矩波形 (上升沿有所加宽 ) ,而且传输线模式中的重要参数 ,电流从底部传播到顶端经历的时间 ,也可以近似地用辐射场时间积分幅度与辐射场幅度之比来估计。这一方法具有估计云闪双极性大脉冲辐射过程的放电参数的潜力。     

2003年淮河流域大水期间体积降水量的研究

针对 2 0 0 3年梅雨期淮河流域大水提出了体积降水量的概念及其计算方法 ,在计算出淮河流域和其各子流域逐日和总体积降水量的基础上 ,将体积降水量与水文站的水位和流量进行了对比分析。结果表明 :水位对累计体积降水量有较好的即时响应 ,流量对体积降水量有较好的延迟响应。另外 ,讨论了流域体积降水量的预报问题 ,用国内外数值天气预报产品和中央气象台指导预报产品 ,进行了流域体积降水量预报试验 ,并对预报结果进行了检验分析。结果表明 :在目前天气预报水平条件下 ,利用数值天气预报和中央气象台业务预报产品制作体积降水量是可行的 ,能够延长洪水预报的预见期 ;而且 ,数值天气预报产品在预报体积降水量方面有明显的优势 ,因此可以直接利用数值天气预报产品进行体积降水量的客观预报 ,为防汛工作提供重要的依据。     

安徽铜陵矿集区海底喷流沉积体系的流体包裹体微量元素对比

铜陵矿集区与铜-金(多金属)矿床有关的热液活动主要有两大体系。即与海西期海底喷流沉积有关的热液体系和与矽卡岩矿化有关的燕山期岩浆热液体系。查明这两类热液体系的流体包裹体特征对区域找矿和矿床成因研究都有实际意义。在包裹体岩相学研究基础上，应用ICP-MS技术和热爆提取方法，研究了新桥、冬瓜山、峙门口、铜官山、朝山等矿床具代表性的热液石英中流体包裹体的微量元素、稀土元素特征。结果表明，两类热液体系在流体包裹体特征上有较大的区别，在流体的微量元素和稀土元素特征方面也很不相同。海底喷流沉积体系的热液石英中流体包裹体与岩浆热液体系的相比。稀土总量较高，LREE／HREE比值较大，δEu不明显。且Mo／(W Sn)比值较高，反映流体中成矿物质的深源特征；Ga／T1、Rb／Cs大。Zr／Hf低，也不同于岩浆热液体系。