Coseismic and other short-term strain changes recorded with Sacks-Evertson strainmeters in a deep mine, South Africa

Summary. During 1977 March and April, three Sacks-Evertson borehole dilatometers were installed at the ends of boreholes drilled into the sidewall of an experimental tunnel at a depth of 3.1 km in the ERPM gold mine near Johannesburg. In the following year coseismic strain changes ranging from 5 ± 10⁻¹⁰ to values exceeding 5 ± 10⁻⁶ were recorded for hundreds of mine tremors in the magnitude range -1 to 3.7 and at hypocentral distances of 50 m to about 2 km. Hypocentral coordinates and magnitudes were determined from seismograms recorded from an underground array of geophones. Amplitudes and polarities of the coseismic strain steps are generally in excellent agreement with theoretical expectations based on point-source dislocation theory; specifically, the strain steps are proportional to the seismic moment divided by the cube of hypocentral distance. At a strain level of 5 ± 10⁻⁹ or greater the tremors do not appear to be preceded by any short-term indications of instability even for tremors producing coseismic steps greater than 5 ± 10⁻⁶ and for which the strainmeters were within a source radius of the hypocentre. Continuous strain changes observed at the times when the mine excavation, at a distance of about 100 m, is extended are in good agreement with calculated changes based on the theory of elasticity. A similar calculation is consistent with post-seismic strain changes observed to follow some of the closer tremors. These post-seismic strains show a logarithmic dependence on time following the tremor and appear to be due to the interaction of a tremor with the adjacent mine excavation rather than to deformation within the actual seismic source region.     

Influence of microstructure of loess on triaxial shear strength

Vicksburg loess is characterized by preferred orientation of constituent grains, which on the average dip 4° toward the west (N 80–85°W). This investigation was undertaken to study, quantitatively, the relationship between natural fabric anisotropies of Vicksburg loess and the orientation of applied stress distribution Results of the study indicate the fabric anisotropies in Vicksburg loess are reflected by definite variation in triaxial shear strength of dry and moist specimens.

In two series of triaxial tests, ultimate strength of the loess is maximum where σ₁ is perpendicular to grain orientation, and it is reduced where the principal stresses are 45° to the fabric plane. In this respect, Vicksburg loess may serve as a structural model for granular earth materials in illustrating the influence of fabric on ultimate strength. Moreover, the Mohr-Coulomb fracture line consists of two line segments, with an increase in slope at higher confining pressure. This characteristic suggests that poorly-cemented sands, or sandstones, and silts, or siltstones, may undergo two failures: one at small strains where cement bonds are disrupted and the other at larger strains where internal shearing resistance of granular components is exceeded.     

Lunar nomenclature: A dissenting note

This note reviews the nature of the traditional (Mädler) lunar nomenclature and the recent developments based on the use of more than 2000 named provinces. It appears that the new nomenclature is less efficient than the old in many cases and may lead to an impossible publication situation. The unnecessary break with the past is especially critized.     

Measurements of hillslope debris flow impact pressure on obstacles

We present measurements of hillslope debris flow impact pressures on small obstacles. Two impact sensors have been installed in a real-scale experimental site where 50?m³ of water-saturated soil material are released from rest. Impact velocities vary between 2 and 13?m/s; flow heights between 0.3 and 1.0?m. The maximum impact pressures measured over 15 events represent between 2 and 50 times the equivalent static pressures. The measurements reveal that quadratic velocity-dependent formulas can be used to estimate impact pressures. Impact coefficients C are constant from front to tail and range between 0.4?<?C?<?0.8 according to the individual events. The pressure fluctuations to depend on the sensor size and are between 20% and 60% of the mean pressure values. Our results suggest that hazard guidelines for hillslope debris flows should be based on quadratic velocity-dependent formulas.     

Cosmogenic nuclide measurements in southernmost South America and implications for landscape change

We measured in situ ¹⁰Be, ²⁶Al and³⁶Cl on glacial deposits as old as 1.1 Myr in the southernmost part of Patagonia and on northern Tierra del Fuego to understand boulder and moraine and, by inference, landscape changes. Nuclide concentrations indicate that surface boulders have been exposed for far less time than the ages of moraines they sit upon. The moraine ages are themselves constrained by previously obtained ⁴⁰Ar/³⁹Ar ages on interbedded lava flows or U-series and amino acid measurements on related (non-glacial) marine deposits. We suggest that a combination of boulder erosion and their exhumation from the moraine matrix could cause the erratics to have a large age variance and often short exposure histories, despite the fact that some moraine landforms are demonstrably 1 Myr old. We hypothesize that fast or episodic rates of landscape change occurred during glacial times or near the sea during interglacials. Comparison with boulder erosion rates and exhumation histories derived for the middle latitudes of semi-arid Patagonia imply different geomorphic processes operating in southernmost South America. We infer a faster rate of landscape degradation towards the higher latitudes where conditions have been colder and wetter.     

Determination of turbidity patterns of the Zhujiang estuarine region,South China,using satellite images and a GIS approach

Landsat MSS images and SPOT HRV data were employed to map the changes in turbidity levels in the Zhujiang estuarine region, South China, during the dry season in the period 1973–1987 at low and high tides. Analysis of turbidity trends and changes in the spatial pattern of high turbidity class was carried out with a GIS software—IDRISI. It was concluded that with the use of OVERLAY and RECLASS functions in the GIS approach a large number of turbidity maps could be easily compared and the turbidity trend determined. The GIS approach further permitted evaluation of the importance of such factors as water depths, mean tidal differences, and water salinity to sedimentation in the study region.     

Determination of solar wind elemental abundances from M/Q observations during three periods in 1980

Mass spectra in the range 2 ≦ M/Q ≦ 3 provided by a high resolution mode of the ISEE-3 Plasma Composition Experiment were evaluated for three selected periods during early 1980. The observed Ne/O ratios are compatible with estimated solar abundance ratios. In two of the three periods, the He/Ne-ratios agree with the Apollo foil results. Freezing-in temperatures for oxygen are similar to those obtained by other groups. Possible reasons for an unexpectedly high flux at M/Q = 2.4 are discussed.     

Power law relating 10.7 cm flux to sunspot number

To investigate the relation between observations of the 10.7 cm flux and the international sunspot number so that a physical unit may be ascribed to historical records, both polynomial and power law models are developed giving the radio flux as a function of sunspot number and vice versa. Bayesian data analysis is used to estimate the model parameters and to discriminate between the models. The effect on the parameter uncertainty and on the relative evidence of normalizing the measure of fit is investigated. The power law giving flux as a function of sunspot number is found to be the most plausible model and may be used to estimate the radio flux from historical sunspot observations.