Solute transport by surface runoff from low‐angle slopes: theory and application

The removal of chemicals in solution by overland flow from agricultural land has the potential to be a significant source of chemical loss where chemicals are applied to the soil surface, as in zero tillage and surface‐mulched farming systems. Currently, we lack detailed understanding of the transfer mechanism between the soil solution and overland flow, particularly under field conditions. A model of solute transfer from soil solution to overland flow was developed. The model is based on the hypothesis that a solute is initially distributed uniformly throughout the soil pore space in a thin layer at the soil surface. A fundamental assumption of the model is that at the time runoff commences, any solute at the soil surface that could be transported into the soil with the infiltrating water will already have been convected away from the area of potential exchange. Solute remaining at the soil surface is therefore not subject to further infiltration and may be approximated as a layer of tracer on a plane impermeable surface. The model fitted experimental data very well in all but one trial. The model in its present form focuses on the exchange of solute between the soil solution and surface water after the commencement of runoff. Future model development requires the relationship between the mass transfer parameters of the model and the time to runoff to be defined. This would enable the model to be used for extrapolation beyond the specific experimental results of this study. The close agreement between experimental results and model simulations shows that the simple transfer equation proposed in this study has promise for estimating solute loss to surface runoff. Copyright © 2000 John Wiley & Sons, Ltd.     

Field significance of performance measures in the context of regional climate model evaluation. Part 1: temperature

A new approach for rigorous spatial analysis of the downscaling performance of regional climate model (RCM) simulations is introduced. It is based on a multiple comparison of the local tests at the grid cells and is also known as “field” or “global” significance. New performance measures for estimating the added value of downscaled data relative to the large-scale forcing fields are developed. The methodology is exemplarily applied to a standard EURO-CORDEX hindcast simulation with the Weather Research and Forecasting (WRF) model coupled with the land surface model NOAH at 0.11 ^° grid resolution. Monthly temperature climatology for the 1990–2009 period is analysed for Germany for winter and summer in comparison with high-resolution gridded observations from the German Weather Service. The field significance test controls the proportion of falsely rejected local tests in a meaningful way and is robust to spatial dependence. Hence, the spatial patterns of the statistically significant local tests are also meaningful. We interpret them from a process-oriented perspective. In winter and in most regions in summer, the downscaled distributions are statistically indistinguishable from the observed ones. A systematic cold summer bias occurs in deep river valleys due to overestimated elevations, in coastal areas due probably to enhanced sea breeze circulation, and over large lakes due to the interpolation of water temperatures. Urban areas in concave topography forms have a warm summer bias due to the strong heat islands, not reflected in the observations. WRF-NOAH generates appropriate fine-scale features in the monthly temperature field over regions of complex topography, but over spatially homogeneous areas even small biases can lead to significant deteriorations relative to the driving reanalysis. As the added value of global climate model (GCM)-driven simulations cannot be smaller than this perfect-boundary estimate, this work demonstrates in a rigorous manner the clear additional value of dynamical downscaling over global climate simulations. The evaluation methodology has a broad spectrum of applicability as it is distribution-free, robust to spatial dependence, and accounts for time series structure.     

The representative concentration pathways: an overview

This paper summarizes the development process and main characteristics of the Representative Concentration Pathways (RCPs), a set of four new pathways developed for the climate modeling community as a basis for long-term and near-term modeling experiments. The four RCPs together span the range of year 2100 radiative forcing values found in the open literature, i.e. from 2.6 to 8.5 W/m². The RCPs are the product of an innovative collaboration between integrated assessment modelers, climate modelers, terrestrial ecosystem modelers and emission inventory experts. The resulting product forms a comprehensive data set with high spatial and sectoral resolutions for the period extending to 2100. Land use and emissions of air pollutants and greenhouse gases are reported mostly at a 0.5?×?0.5 degree spatial resolution, with air pollutants also provided per sector (for well-mixed gases, a coarser resolution is used). The underlying integrated assessment model outputs for land use, atmospheric emissions and concentration data were harmonized across models and scenarios to ensure consistency with historical observations while preserving individual scenario trends. For most variables, the RCPs cover a wide range of the existing literature. The RCPs are supplemented with extensions (Extended Concentration Pathways, ECPs), which allow climate modeling experiments through the year 2300. The RCPs are an important development in climate research and provide a potential foundation for further research and assessment, including emissions mitigation and impact analysis.     

Spatial variability of phytoplankton, nutrients and new production estimates in the waters around Svalbard

Phytoplankton dynamics and carbon input into Arctic and sub-Arctic ecosystems were investigated around Svalbard, in summer 1991. Phytoplankton biomass, species composition and dissolved nutrient concentrations were analysed from water samples collected along seven transects. Phytoplankton biomass was low especially to the north (Chlorophyll-a mean 0.3 pg 1- '), where flagellates dominated the communities and only ice-diatoms were present. To the west, the phytoplankton composition was representative of a summer Atlantic community, in a post-bloom state. Zooplankton grazing, mainly by copepods, appeared to be the main control on biomass to the west and north of Svalbard.
In the Barents Sea (east of Svalbard), an ice edge bloom was observed (Chlorophyll-a max. 6.8 pgl-') and the ice edge receded at a rate of approximately 1 1 km day-'. The phytoplankton community was represented by marginal ice species, especially Phaeocystis poucherii and Chaeroceros socialis. South of the ice edge, Deep Chlorophyll Maxima (DCM) were observed, as surface waters became progressively nutrient-depleted. In these surface waters, the phytoplankton were predominantly auto- and heterotrophic flagellates.
Carbon production measurements revealed high net production (new and regenerated) to the north of the Barents Sea Polar Front (BSPF); it was especially high at the receding ice edge (reaching 1.44gC m-'day-'). To the south, a low level of production was maintained, mainly through regenerative processes.     

Assessing Possibilities and Limitations for Biomarker Analyses on Outcrop Samples: A Case Study on Carbonates of the Shibantan Member (Ediacaran Period,Dengying Formation,South China)

Abstract: The Shibantan Member (Dengying Formation, South China) represents one of only two carbonate settings with Ediacara-type organisms and offers a rare opportunity to study the biogeochemistry of these ecosystems. To evaluate possibilities and limitations for future biomarker studies on fossil-bearing outcrop samples of the Shibantan Member, we analysed the spatial distribution of hydrocarbons in extractable organic matter (i.e. bitumen) on a millimetre scale. Our study demonstrates that the sample and most likely also other rocks from the same setting are contaminated with petroleum-derived compounds that bear the potential for erroneous interpretations in palaeo-reconstructions. The contamination was revealed by distribution patterns and amounts of extractable n-alkanes and acyclic isoprenoids. The contamination is linked to the external weathering surfaces but also to cracks within the rock, and the extent most likely depends on concentration gradients between these contamination sources. Here we show that contamination can successfully be distinguished from syngenetic signals obtained from non-extractable organic matter (i.e. kerogen) using catalytic hydropyrolysis (HyPy). However, we observed that decalcification is necessary to achieve sufficient yields of kerogen-bound hydrocarbons and to avoid artificial alteration of the biomarker signals due to matrix effects.     

Late Hercynian polymetallic vein-type base-metal mineralization in the Iberian Pyrite Belt: fluid-inclusion and stable-isotope geochemistry (S–O–H–Cl)

Late Variscan vein-type mineralization in the Iberian Pyrite Belt, related to the rejuvenation of pre-existing fractures during late Variscan extensional tectonism, comprises pyrite–chalcopyrite, quartz–galena–sphalerite, quartz–stibnite–arsenopyrite, quartz–pyrite, quartz–cassiterite–scheelite, fluorite–galena–sphalerite–chalcopyrite, and quartz–manganese oxide mineral assemblages. Studies of fluid inclusions in quartz, stibnite, and barite as well as the sulfur isotopic compositions of stibnite, galena, and barite from three occurrences in the central part of the Iberian Pyrite Belt reveal compelling evidence for there having been different sources of sulfur and depositional conditions. Quartz–stibnite mineralization formed at temperatures of about 200 °C from fluids which had undergone two-phase separation during ascent. Antimony and sulfide are most probably derived by alteration of a deeper lying, volcanic-hosted massive sulfide mineralization, as indicated by δ³⁴S signatures from ?1.45 to ?2.74‰. Sub-critical phase separation of the fluid caused extreme fractionation of chlorine isotopes (δ³⁷Cl between ?1.8 and 3.2‰), which correlates with a fractionation of the Cl/Br ratios. The source of another high-salinity fluid trapped in inclusions in late-stage quartz from quartz–stibnite veins remains unclear. By contrast, quartz–galena veins derived sulfide (and metals?) by alteration of a sedimentary source, most likely shale-hosted massive sulfides. The δ³⁴S values in galena from the two study sites vary between ?15.42 and ?19.04‰. Barite which is associated with galena has significantly different δ³⁴S values (?0.2 to 6.44‰) and is assumed to have formed by mixing of the ascending fluids with meteoric water.     

Analysis of the incommensurately modulated OS phase of SiO2 tridymite

The structure, symmetry and origin of the incommensurately modulated OS phase of tridymite (SiO₂) and its lock-in to the OP three-fold superlattice structure are discussed in a computational study. The structure of the OS phase (which has not been determined experimentally) is deduced as the only geometrically possible structure derived from the parent OC phase by rotation and translation of the SiO₄ tetrahedra without significant distortion of these units. It can be visualised conveniently in terms of the McConnell formalism of two component difference structures C₁ and C₂ whose space group symmetries are derived. The results are in accordance with the known lock-in structure at wave vector Q= a ^*. In the latter, the ±C₁ regions expand and the structure can square up in a very general way to take advantage of the lost symmetries (lost compared with the OC phase). Received: 4 August 1997 / Revised, accepted 24 November 1997