Juvenile contribution of the Neoproterozoic Rio Negro Magmatic Arc (Ribeira Belt,Brazil): Implications for Western Gondwana amalgamation

The ca. 790–600 Ma Rio Negro Complex (RNC) of the Ribeira belt (Brazil) consists of a plutonic portion of a magmatic arc built by the E-vergent subduction of the ESE border of the São Francisco paleoplate during the amalgamation of Western Gondwana.The plutonic series comprises low- to medium-K granitoids (ca. 790–620 Ma) and high-K granitoids and shoshonite rocks (ca. 610–605). The age span of 185 m.y. is suggestive of a long history of arc-related magmatism, continuously or not in time. The Nd isotopic signatures of the RNC consist of εNd(t) ratios from ? 3 to + 5 for the medium-K series shoshonite series and from ? 14 to ? 3 for the younger high-K group. This time-dependent trend of Nd isotopes is indicative of progressive maturity of the arc over time. The same evolution is indicated by Sr data, as the medium-K rocks have ⁸⁷Sr/⁸⁶Sr initial ratios < 0.705 while the high-K rocks yield values between 0.705 and 0.710. The predominance of intermediate rocks over mafic ones suggests an initial intra-oceanic to transitional stage, possibly developed in a distal portion of a passive margin, such as the Japanese arc, evolving to a more developed, differentiated felsic rock associations.The role of transform fault zones, such as the Luanda shear zone, is emphasized in order to explain the consumption of a wide oceanic plate in the inner portion of Western Gondwana.     

Geoelectrical mapping of contamination in the cemeteries: the case study in Piracicaba,São Paulo/Brazil

This paper presents the results of electrical resistivity methods in the area delineation that was potentially contaminated by liquefaction products, which are also called putrefactive liquids in Vila Rezende municipal cemetery, Piracicaba, São Paulo, Brazil. The results indicate a depth of water table between 3.1 and 5.1 m, with two groundwater direction flows, one to the SW and another to the SE. Due to the contamination plumes, which have the same groundwater direction flow, as well the conductive anomalies observed in the geoelectric sections, the contamination suspicions in the area were confirmed. The probable plume to the SE extends beyond the limits of the cemetery. The location of the conductive anomalies and the probable contamination plumes showed that the contamination is linked with the depth of the water table and the burial time. Mapping using the geostatistical method of ordinary kriging applied to the work drew structural characteristics of the regional phenomenon and spatial behavior of the electrical resistivity data, resulting in continued surfaces. Thus, this method has proved to be an important tool for mapping contamination plumes in cemeteries.     

Influence of the properties of tropical soils in the toxicity and bioavailability of heavy metals in sewage sludge-amended lands

The toxicity and potential bioavailability of heavy metals were studied in sewage sludge-amended ferralsols and chernosols, using bioassays with earthworms (Eisenia andrei). Acute toxicity tests and avoidance assays were performed according to standard protocols. Potentially bioavailable concentrations of heavy metals were estimated by quantifying their concentrations in tissues of survival earthworms. The results revealed that soil properties played an important role in the toxicity and bioavailability of heavy metals. In this respect, higher levels of toxicity were detected for the ferralsol. The abundance of 2:1 clay minerals, high fertility and more basic values of pH seem to be very important in the reduction of toxicity levels for earthworms. Organisms exposed to the chernosols were able to uptake higher amount of metals. In that case, higher contents of nutrients in chernosols may have influenced such bioavailability processes. Avoidance responses were the most sensible indicator of toxicity. In the near future, such data can subsidize the establishment of toxic reference concentrations able to reflect the characteristics of important tropical pedological occurrences, supporting the definition of sustainable indicators for using sewage sludge in the tropical agriculture.     

Dip‐adaptive singular‐value decomposition filtering for seismic reflection enhancement

We present a singular value decomposition (SVD) filtering method for the enhancement of coherent reflections and for attenuation of noise. The method is applied in two steps. First normal move‐out (NMO) correction is applied to shot or CMP records, with the purpose of flattening the reflections. We use a spatial SVD filter with a short sliding window to enhance coherent horizontal events. Then the data are sorted in common‐offset panels and the local dip is estimated for each panel. The next SVD filtering is performed on a small number of traces and a small number of time samples centred around the output sample position. Data in a local window are corrected for linear moveout corresponding to the dips before SVD. At the central time sample position, we sum over the dominant eigenimages of a few traces, corresponding to SVD dip filtering. We illustrate the method using land seismic data from the Tacutu basin, located in the north‐east of Brazil. The results show that the proposed method is effective and is able to reveal reflections masked by ground‐roll and other types of noise.     

Producing time series of river water height by means of satellite radar altimetry—a comparative study

Abstract

Satellite radar altimetry is complementary to in situ limnimetric surveys as a means of estimating the water height of large rivers, lakes and flood plains. Production of water height time series by satellite radar altimetry technology requires first the selection of radar ground target locations corresponding to water body surfaces under study, i.e. the definition of “virtual limnimetric stations”. We propose to investigate qualitative and quantitative differences between three representative virtual station creation methodologies: (a) a fully manual method, (b) a semi-automatic method based on a land cover characterization that allows the water body surface under study to be located; and (c) an original fully automatic procedure that exploits a digital elevation model and an estimation of the river width. The results yielded by these three methods are comparable: maximum absolute magnitudes of water height differences being 0.46, 0.26 and 0.15 m for, respectively, 95, 90 and 80% of the water height values obtained. Moreover, more than 67% and 92% of time series jointly produced by the methods present root mean square differences lower than 20 and 50 cm, respectively. The results show that the fully automatic method developed herein provides as reliable results as the fully manual one. This opens the way to use of satellite radar altimetry for the generation of water height time series on a large scale, and considerably extends the applicability of satellite radar altimetry in hydrology.

Citation Roux, E., Santos da Silva, J., Vieira Getirana, A. C., Bonnet, M.-P., Calmant, S., Martinez, J.-M. & Seyler, F. (2010) Producing time series of river water height by means of satellite radar altimetry—comparative study. Hydrol. Sci. J. 55(1), 104–120.     

The consequences of Brazil’s lack of transport planning is written in the blood of sparrows

The medium-sized cities of Brazil are those with populations of between 100,000 and 500,000 inhabitants. These cities are growing rapidly, and are characterized by poor urban planning, a loss of biodiversity and decreasing health prospects for residents. Historically, urbanization in Brazil has been associated with incentives to increase the use of private vehicles for local transport. The air pollution resulting from this “car dependency” has been quantified in some major cities in Brazil, such as the megacity of São Paulo. In this paper, we demonstrate through a bioindication study carried out in the Brazilian city of Rondonópolis, that atmospheric pollution resulting from vehicular emissions is also a measurable reality for medium-sized cities. Most Brazilian cities lack air quality measurement equipment, and we used an inexpensive and easy to apply bioindication assay to measure air pollution, and this approach could be easily implemented in those cities and beyond.     

Paying as the urban areas grow – implementing and managing urban development charges using a GIS application

Urban development charges (UDC) are considered relevant taxation instruments that can improve the economic sustainability of urban areas and the financial health of the respective local governments. The economic formulation and justification based on the ‘direct benefit principle,’ the ‘accountability principle,’ and the ‘proportionality principle’ requires a methodology that can be supported by a geographic information system (GIS) application. This article presents the research output of a real case study – the municipality of Aljezur, Portugal – and the fundamentals of the GIS tool that was designed. This GIS-based methodology comprises a multi-annual infrastructure capital plan and an accurate zoning map for spatial differentiation of values combining municipal-wide and site-specific approaches, following ‘pay as the urban areas grow’ perspective applied to urban development and new buildings. It requires data integration of the urban planning process with infrastructure and urban growth data in order to manage and monitor the computation of this charge over time, thereby increasing the accuracy, the objectivity and the clarity of the process. The results obtained show that this UDC-GIS application seems well adapted to small municipalities. Its possible replication and use in other contexts require adaptations derived from different urban and taxation policy options and from different legal, organizational, technological, and informational local systems.     

Polarisation measurements with a CdTe pixel array detector for Laue hard X-ray focusing telescopes

Polarimetry is an area of high energy astrophysics which is still relatively unexplored, even though it is recognized that this type of measurement could drastically increase our knowledge of the physics and geometry of high energy sources. For this reason, in the context of the design of a Gamma-Ray Imager based on new hard-X and soft gamma ray focusing optics for the next ESA Cosmic Vision call for proposals (Cosmic Vision 2015-2025), it is important that this capability should be implemented in the principal on-board instrumentation. For the particular case of wide band-pass Laue optics we propose a focal plane based on a thick pixelated CdTe detector operating with high efficiency between 60–600keV. The high segmentation of this type of detector (1–2mm pixel size) and the good energy resolution (a few keV FWHM at 500keV) will allow high sensitivity polarisation measurements (a few % for a 10mCrab source in 10⁶s) to be performed. We have evaluated the modulation Q factors and minimum detectable polarisation through the use of Monte Carlo simulations (based on the GEANT 4 toolkit) for on and off-axis sources with power law emission spectra using the point spread function of a Laue lens in a feasible configuration.