Holocene record of productivity in the NW Iberian continental shelf

A multiproxy approach (textural characteristics, heavy metal concentrations and benthic foraminifera data) was adopted to study the OMEX core KSGX 40, collected at the Galicia Mud Deposit (NW Iberian outer continental shelf) and recording the last ca. 4.8 ka cal BP. Geochemical profiles of Fe, Mn, Zn, Co, Cr, Cu, Ni, Pb, Al and Ca show significant temporal variations. Benthic foraminifera productivity proxy suggests that the recorded muddy events were contemporaneous of a higher C_org flux to the marine benthic environment. The higher flux of organic matter, following a long-term intensification of the upwelling and coinciding with a finer sedimentation, led to depressed levels of oxygen beneath the water-sediments interface and to early diagenetic processes of several redox-sensitive elements.     

Study of geothermal water intrusion due to groundwater exploitation in the Puebla Valley aquifer system, Mexico

Significant intrusion of geothermal water into fresh groundwater takes place in the Puebla Valley aquifer system, Mexico. The decline in the potentiometric surface due to the overexploitation of the groundwater induces this intrusion. This hydrological system comprises three aquifers located in Plio-Quaternary volcanic sediments and Mesozoic calcareous rocks. The hydraulic balance of the aquifer shows that the annual output exceeds the natural inputs by 12 million m³. Between 1973 and 2002, a drop in the potentiometric surface, with an 80 m cone of depression, was identified in a 5-km-wide area located southwest of the city of Puebla. Chemical analyses performed on water samples since 1990 have shown an increase in total dissolved solids (TDS) of more than 500 mg/L, coinciding with the region showing a cone of depression in the potentiometric surface. A three-dimensional flow and transport model, based on the hydrogeological and geophysical studies, was computed by using the MODFLOW and MT3D software. This model reproduces the evolution of the aquifer system during the last 30 years and predicts for 2010 an additional drawdown in the potentiometric surface of 15 m, and an increase in the geothermal water intrusion.     

Aerosol characterization and optical thickness retrievalsusing GOME and METEOSAT satellite data

Summary ?Retrievals of atmospheric aerosol optical thickness are highly dependent on the choice of the class describing the aerosol properties leading to significant errors while using classes available in the literature. High spectral resolution measurements from GOME (Global Ozone Monitoring Experiment) between the ultraviolet and the near infrared can be used for an accurate characterization of the aerosol optical properties. The radiometer MVIRI (METEOSAT Visible and Infrared Imager) on board the geostationary satellite METEOSAT, while being equipped only with broadband VIS channel, ensures an adequate half-hourly monitoring of the atmospheric conditions over a large portion of the Earth. The present algorithm is based on a combination of data from both sensors for the retrieval of the aerosol optical thickness at the reference wavelength of 0.55 μm (AOT). A case of a desert dust outbreak from the African continent over the Atlantic Ocean is examined. AOT values obtained using a priori fixed classes taken from the literature are compared with those retrieved with this algorithm using the GOME-derived classes. Systematic differences of the order of a few tenths on average are found which remain significant also after considering the measurement errors. This represents a novelty introduced by the synergetic use of both sensors. Received March 13, 2002     

Development of site-specific design ground motions in Western and Eastern North America

This paper presents results recently obtained for generating site-specific ground motions needed for design of critical facilities. The general approach followed in developing these ground motions using either deterministic or probabilistic criteria is specification of motions for rock outcrop or very firm soil conditions followed by adjustments for site-specific conditions. Central issues in this process include development of appropriate attenuation relations and their uncertainties, differences in expected motions between Western and Eastern North America, and incorporation of site-specific adjustments that maintain the same hazard level as the control motions, while incorporating uncertainties in local dynamic material properties. For tectonically active regions, such as the Western United States (WUS), sufficient strong motion data exist to constrain empirical attenuation relations for M up to about 7 and for distances greater than about 10–15 km. Motions for larger magnitudes and closer distances are largely driven by extrapolations of empirical relations and uncertainties need to be substantially increased for these cases.

For the Eastern United States (CEUS), due to the paucity of strong motion data for cratonic regions worldwide, estimation of strong ground motions for engineering design is based entirely on calibrated models. The models are usually calibrated and validated in the WUS where sufficient strong motion data are available and then recalibrated for applications to the CEUS. Recalibration generally entails revising parameters based on available CEUS ground motion data as well as indirect inferences through intensity observations. Known differences in model parameters such as crustal structure between WUS and CEUS are generally accommodated as well. These procedures are examined and discussed.     

U–Pb zircon chronostratigraphy of early-Pliocene ignimbrites from La Pacana, north Chile: implications for the formation of stratified magma chambers

High spatial resolution U–Pb dates of zircons from two consanguineous ignimbrites of contrasting composition, the high-silica rhyolitic Toconao and the overlying dacitic Atana ignimbrites, erupted from La Pacana caldera, north Chile, are presented in this study. Zircons from Atana and Toconao pumice clasts yield apparent ²³⁸U/²⁰⁶Pb ages of 4.11±0.20 Ma and 4.65±0.13 Ma (2σ), respectively. These data combined with previously published geochemical and stratigraphic data, reveal that the two ignimbrites were erupted from a stratified magma chamber. The Atana zircon U–Pb ages closely agree with the eruption age of Atana previously determined by K–Ar dating (4.0±0.1 Ma) and do not support long (>1 Ma) residence times. Xenocrystic zircons were found only in the Toconao bulk ignimbrite, which were probably entrained during eruption and transport. Apparent ²³⁸U/²⁰⁶Pb zircon ages of 13 Ma in these xenocrysts provide the first evidence that the onset of felsic magmatism within the Altiplano–Puna ignimbrite province occurred approximately 3 Myr earlier than previously documented.     

Early Cretaceous planktonic foraminifera from the Tethys: the large, many-chambered representatives of the genus Globigerinelloides

This paper deals with the taxonomic revision of the Early Cretaceous large, many-chambered planispiral planktonic foraminifera, historically assigned to the genus Globigerinelloides or alternatively assigned in the 1990s to the genera Globigerinelloides Cushman and ten Dam, Biglobigerinella Lalicker, Blowiella Krechmar and Gorbachik and Alanlordella BouDagher-Fadel. In a previous paper we demonstrated that the morphological and microstructural features used in the literature for distinguishing Blowiella from Globigerinelloides have value only at species level, and the former genus was thus invalidated (being the junior synonym). Moreover, the Late Aptian specimens assigned to Biglobigerinella by some authors, based on the presence of twin last chamber(s), are also included in Globigerinelloides because individuals sharing the same features (number of chambers, growth rate, size of umbilicus, and a finely perforate wall) may or may not possess twin last chamber(s). Meanwhile, Moullade et al. questioned the taxonomic value of Alanlordella, erected by BouDagher-Fadel to accommodate planispiral taxa possessing a macroperforate wall. All the species analysed here possess a finely perforate wall and consequently cannot be assigned to this taxon.The large species of Globigerinelloides retained here, with six or more chambers in the outer whorl, are G. algerianus Cushman and ten Dam, G. aptiensis Longoria, G. barri (Bolli, Loeblich and Tappan) and G. ferreolensis (Moullade).In the sections studied, Globigerinelloides aptiensis was first found close to the Barremian/Aptian boundary, even though this species was recorded in Spain (Rio Argos) in the mid Upper Barremian; very rare, small, seven-chambered individuals here assigned to Globigerinelloides ferreolensis are recorded in the Lower Aptian (just below and within the Selli Level, OAE1a), while a few specimens belonging to Globigerinelloides barri occur in the Globigerinelloides ferreolensis Zone (Upper Aptian). Globigerinelloides aptiensis and G. ferreolensis range up to the Ticinella bejaouaensis Zone while Globigerinelloides barri disappears at the top of the Globigerinelloides algerianus Zone; finally, Globigerinelloides algerianus obviously spans the eponymous total range zone.From an evolutionary point of view, two lineages within the many-chambered Globigerinelloides have been recognized. In the first, already known in the literature, Globigerinelloides aptiensis gave rise to G. ferreolensis, which evolved into G. algerianus; the latter in turn gave rise to Pseudoplanomalina cheniourensis as the final evolutionary member. In the second lineage Globigerinelloides barri originated from G. blowi.     

Microstructural evolution of the Seridó Belt, NE-Brazil: the effect of two tectonic events on development of c-axis preferred orientation in quartz

The polyphase evolution of the Seridó Belt (NE-Brazil) includes D₁ crust formation at 2.3–2.1 Ga, D₂ thrust tectonics at 1.9 Ga and crustal reworking by D₃ strike-slip shear zones at 600 Ma. Microstructural investigations within mylonites associated with D₂ and D₃ events were used to constrain the tectono-thermal evolution of the belt. D₂ shear zones commenced at deeper crustal levels and high amphibolite facies conditions (600–650 °C) through grain boundary migration, subgrain rotation and operation of quartz c-prism slip. Continued shearing and exhumation of the terrain forced the re-equilibration of high-T fabrics and the switching of slip systems from c-prism to positive and negative a-rhombs. During D₃, enhancement of ductility by dissipation of heat that came from syn-D₃ granites developed wide belts of amphibolite facies mylonites. Continued shearing, uplift and cooling of the region induced D₃ shear zones to act in ductile-brittle regimes, marked by fracturing and development of thinner belts of greenschist facies mylonites. During this event, switching from a-prism to a-basal slip indicates a thermal path from 600 to 350 °C. Therefore, microstructures and quartz c-axis fabrics in polydeformed rocks from the Seridó Belt preserve the record of two major events, which includes contrasting deformation mechanisms and thermal paths.     

Modélisation morphodynamique cross-shore d'un estran vaseux

Numerical experiments were performed to simulate the profile evolution of an intertidal mudflat with a 1D cross-shore morphodynamical model. First, the hydrodynamical forcing is a cross-shore tidal current due to semi-diurnal variations of the free surface elevation at the open boundary. Further, considering the conservation of the action density of surface gravity waves, a wave height (and resulting bottom shear stress) calculation is added to the morphodynamical model. Results of the numerical experiments show that the shape of the profile reaches equilibrium. The mudflat progrades continually when the forcing is tide only, whereas it can be steady under the simultaneous action of tide and waves. To cite this article: B. Waeles et al., C. R. Geoscience 336 (2004).     

Archaeoseismic record at the ancient Roman City of Baelo Claudia (Cádiz, south Spain)

This study represents the first paleoseismic approach in Spain in which archaeological remains are considered. The ancient Roman city of Baelo Claudia (1st–4th centuries AD), located at the axial zone of the Gibraltar Strait (Cadiz, south Spain), contains abundant disrupted architectural relics and ground collapses (i.e. landsliding, liquefacion) probably related to historic earthquake damage of intensity IX–X MSK. The archaeological stratigraphy of the city evidence two major episodes of abrupt city destruction bracketed in AD 40–60 and AD 350–395 separated by an intervening horizon of demolition for city rebuilding, otherwise characteristic for many earthquake-damaged archaeological sites in the Mediterranean. The second episode led the eventual city abandonment, and it is evidenced by good examples of column collapse, distortion, failure and breakdown of house and city walls, and pavement warping and disruptions documented during different archaeological excavations, which can be catalogued as secondary coseismic effects. Main damaged relicts observable today are the set of pop-up like arrays and warping developed in the ancient Roman pavement. Their analysis indicate an anomalous westwards ground displacement oblique to the main gentle southward slope of the topography, as also evidence failures, collapses and breakdown of walls and columns, suggesting that stress acted in a broad SW–NE/WSW–ENE orientation consistent whit the expectable motion along the largest NE–SW strike-slip faults of the zone, which in turn can be catalogued as seismic sources of moderate events (ca. 5 mb). Major disruptions and city abandonment were hesitantly related to relatively far strong earthquakes occurred during the late 4th century AD in the Mediterranean or western coast of Iberia by Menanteau et al. [Menanteau, L., Vanney, J.R., Zazo, C., 1983. Belo II : Belo et son environment (Detroit de Gibraltar), Etude physique d'un site antique. Pub. Casa de Velazquez, Serie Archeologie 4., Ed. Broccard, París.]. However, this study indicates that the occurrence of close moderate earthquakes jointly with the unstable character of the ground at the zone (site effect) is a more reliable hypothesis to explain the observed deformations.