Geological evaluation of EIGEN-6C4 and GOCE derived gravity models in and around Karakoram shear zone,Leh, India

New generation high resolution gravity models derived from space-borne gravity data, integrated with land based surveys, have enabled understanding of regional gravity field over regions, which are till date considered to be inaccessible for land surveys, especially in mountainous terrains. In this study, we evaluate two high resolution gravity models EIGEN-6C4 and GO_CONS_GCF_2_TIM_R5 in order to understand its usability in identification of meso-scale regional geological features and lithological boundaries around the Karakoram shear zone, in Leh, India. The EIGEN-6C4 is a “hybrid” model integrating data from space-borne sensors and terrestrial data, whereas GO_CONS_GCF_2_TIM_R5 is a model derived from the latest space-borne GOCE sensor. Bouguer gravity anomaly has been derived for both the models and compared. It is seen that, the GOCE derived model pertains to the regional gravity field of the region and compares well with the regional derivative of the EIGEN-6C4 model. Further, the EIGEN-6C4 has been analyzed using horizontal derivatives (dx, dy), analytical signal (ANS) and tilt derivative (TDR) techniques. These, derived maps are then overlain on published geological map of the area to understand the correlation between sub-surface geology vis a vis gravitational signal. The major and distinct geological signatures as derived from the various derivative maps correlate well with the existing geological map. The source boundaries derived from the TDR map agrees reasonably well with the lithological boundaries. Further, the anomaly and derivative maps from EIGEN-6C4 indicates towards a possible continuation of the Shyok suture zone in the region. Therefore, for the given spatial extent of the area under consideration, the GOCE derived model represents the regional field, whereas the EIGEN-6C4 data and derivatives are of sufficient resolution for understanding the geological variability in and around the Karakoram shear zone.     

Measurement of radon exhalation rate in various building materials and soil samples

Indoor radon is considered as one of the potential dangerous radioactive elements. Common building materials and soil are the major source of this radon gas in the indoor environment. In the present study, the measurement of radon exhalation rate in the soil and building material samples of Una and Hamirpur districts of Himachal Pradesh has been done with solid state alpha track detectors, LR-115 type-II plastic track detectors. The radon exhalation rate for the soil samples varies from 39.1 to 91.2 mBq kg^?1 h^?1 with a mean value 59.7 mBq kg^?1 h^?1. Also the radium concentration of the studied area is found and it varies from 30.6 to 51.9 Bq kg^?1 with a mean value 41.6 Bq kg^?1. The exhalation rate for the building material samples varies from 40.72 (sandstone) to 81.40 mBq kg^?1 h^?1 (granite) with a mean value of 59.94 mBq kg^?1 h^?1.     

Mycorrhizal Colonization Affects the Survival of Vetiveria zizanioides (L.) Nash Grown in Water Containing As(III)

The presence of arsenic (As) in water is of great public concern. Arsenic exists in three common valence states viz., As(0) metalloid arsenic, As(III) (arsenite) and As(V) (arsenate). Arsenite [As(III)] is the most toxic form among arsenicals which, predominates in anaerobic conditions, generally in flooded soils and in the water with high BOD. Experiments were conducted to investigate the effect of As(III) on the mycorrhization in vetiver (Vetiveria zizanioides (L.) Nash) grass in hydroponics. Studies showed significant alteration in the mycorrhizal colonization in the roots of vetiver exposed to higher concentrations of As(III) starting from 1.0, 2.0, 3.0, 4.0 to 5.0 mg/L prepared in 5% Hoagland nutrient solution without addition of phosphate ions. Considerable reduction in the mycorrhizal intensity (M) was observed in all the treatment sets as compared to the control suggesting a negative impact of the As(III) on the mycorrhizal association. Simultaneously, the study also showed that, As(III) is toxic to the vetiver plants having mycorrhizal association however plants with non‐mycorrhizal (cleansed) roots were found to be able to survive for a longer period exposed to As(III).     

Geospatial Technologies for National Geomorphology and Lineament Mapping Project – A Case Study of Goa State

A three level classification system, based on the genesis of landforms, was used to map the geomorphology of the Goa state. The first level corresponds to the process that was responsible for landform generation, the second level or the intermediate level was assigned based on the morphography, and the third level corresponds to the individual landforms units identified based on the morphostructure. The mapping was carried out using IRS-P6 LISS-III (23.5 m) satellite image as the primary data source. Ancillary data such as geological map, topographic map, digital elevation model (DEM), field data collected by global positioning system (GPS) and web portals for image visualisation, were also used for the mapping purpose. A new software designed for mapping landforms based on the genesis, was used in this study to create a seamless geomorphology and lineament database of the Goa state in a GIS environment. A total of 58 landforms within six types of genetic classes were mapped in this area. Similarly, structural and geomorphic lineaments were also delineated using the satellite data. The database created has multi-purpose usability such as environmental studies, mining activity assessment, coastal zone management and wasteland development, since the classification system used is focused on processes, not theme specific.     

Study of seasonal variation of PM2.5 concentration associated with meteorological parameters at residential sites in Delhi,India

The seasonal variation of particulate matter and its relationship with meteorological parameters were measured at five different residential sites in Delhi. Sampling was carried out for one year including all three seasons (summer, monsoon, and winter). The yearly average concentration of particulate matter (PM_2.5) was 135.16 ± 41.34 µg/m³. The highest average values were observed in winter (208.44 ± 43.67 µg/m³) and the lowest during monsoon season (80.29 ± 39.47 µg/m³). The annual average concentration of PM_2.5 was found to be the highest at the Mukherjee Nagar site (242.16 µg/m³ ) during the winter and lowest at (Jawaharlal Nehru University) JNU (35.65 µg/m³) during the monsoon season. The strongest correlation between PM mass and a meteorological parameter was a strong negative correlation with temperature (R2=0.55). All other parameters were weakly correlated (R2<0.2) with PM mass.

     

Coastal circulation along the central west coast of India during cyclone Phyan: measurements and numerical simulations

Measurements and numerical simulations carried out off Mumbai coast for the period 22 October?C22 November 2009 showed significant variations in water level and currents during cyclone Phyan. Changes in the meridional component of the current velocity were found to be highly significant during Phyan. The strong southward flow due to the cyclone resulted in a complete nullification of a flood current and continued the net flow towards south for approximately 18?h. This enhanced the ebb flow by about 0.12?m/s off Worli and 0.16?m/s off Satpati. The shift in the cyclone generated currents towards north resulted in an enhancement of flood current by 0.3?m/s off Worli and 0.2?m/s off Satpati. During the first 7?h of Phyan, a strong current system associated with an anti-cyclonic eddy was formed off Mangalore, which propagated towards north up to Ratnagiri and disappeared while the cyclone entered the land. Water level variations of 0.38 and 0.44?m were observed due to Phyan off Worli and Satpati, respectively. Positive and negative surges, that is, a fall in water level up to ?20?cm and a rise up to 20?cm, were observed during Phyan and these were associated with shift in the wind direction.     

The hazard potential of the western segment of the Makran subduction zone, northern Arabian Sea

Evaluating the hazard potential of the Makran subduction zone requires understanding the previous records of the large earthquakes and tsunamis. We address this problem by searching for earthquake and tectonic proxies along the Makran Coast and linking those observations with the available constraints on historical seismicity and the tell-tale characteristics of sea floor morphology. The earthquake of Mw 8.1 of 1945 and the consequent tsunami that originated on the eastern part of the Makran are the only historically known hazardous events in this region. The seismic status of the western part of the subduction zone outside the rupture area of the 1945 earthquake remains an enigma. The near-shore shallow stratigraphy of the central part of Makran near Chabahar shows evidence of seismically induced liquefaction that we attribute to the distant effects of the 1945 earthquake. The coastal sites further westward around Jask are remarkable for the absence of liquefaction features, at least at the shallow level. Although a negative evidence, this possibly implies that the western part of Makran Coast region may not have been impacted by near-field large earthquakes in the recent past??a fact also supported by the analysis of historical data. On the other hand, the elevated marine terraces on the western Makran and their uplift rates are indicative of comparable degree of long-term tectonic activity, at least around Chabahar. The offshore data suggest occurrences of recently active submarine slumps on the eastern part of the Makran, reflective of shaking events, owing to the great 1945 earthquake. The ocean floor morphologic features on the western segment, on the contrary, are much subdued and the prograding delta lobes on the shelf edge also remain intact. The coast on the western Makran, in general, shows indications of progradation and uplift. The various lines of evidence thus suggest that although the western segment is potentially seismogenic, large earthquakes have not occurred there in the recent past, at least during the last 600?years. The recurrence period of earthquakes may range up to 1,000?years or more, an assessment based on the age of the youngest dated coastal ridge. The long elapsed time points to the fact that the western segment may have accumulated sufficient slip to produce a major earthquake.     

Gravitational instability of a rotating partially-ionized plasma carrying a uniform magnetic field with hall effect

The problem of gravitational instability of an infinite homogeneous self-gravitating medium carrying a uniform magnetic field in the presence of Hall effect has been investigated to include the effect due to rotation. The dispersion relation has been obtained. It has been found that the Jeans's criterion for the instability remains unaffected even when the effect due to rotation is considered in the presence of Hall effect carrying a uniform magnetic.     

Production of Bauxite Certified Reference Material (BARC-B1201) for Nine Property Values (Al2O3, Fe2O3, SiO2, TiO2, V2O5, MnO,Cr2O3, MgO and LOI) Traceable to SI Units

The National Centre for Compositional Characterisation of Materials (NCCCM) / Bhabha Atomic Research Centre (BARC) and National Aluminium Company Limited (NALCO), India have produced an Indian origin bauxite certified reference material (CRM), referred to as BARC-B1201, certified for major (Al₂O₃, Fe₂O₃, SiO₂, TiO₂, loss on ignition - LOI) and trace contents (V₂O₅, MnO, Cr₂O₃, MgO). Characterisation was undertaken by strict adherence to ISO Guides. A method previously developed and validated in our laboratory, using single step bauxite dissolution and subsequent quantitation (of Al₂O₃, Fe₂O₃, SiO₂, TiO₂, V₂O_5, MnO, Cr₂O₃ and MgO) by ICP-AES (SSBD ICP-AES) was used for homogeneity studies and an inter-laboratory comparison exercise (ILCE) of the candidate CRM. LOI was determined by thermo-gravimetric analysis. Property values were assigned after an ILCE with participation from seventeen reputed government and private sector laboratories in India. The CRM was certified for nine property values: Al₂O₃, Fe₂O₃, SiO₂, TiO₂, V₂O_5, MnO, Cr₂O₃, MgO and LOI, which are traceable to SI units.