New insights on diapirism in the Adriatic Sea: the Tremiti salt structure (Apulia offshore,southeastern Italy)

The reinterpretation of public seismic profiles in the Adriatic offshore of Gargano (Apulia, southern Italy) allowed the detection of a kilometre‐scale salt‐anticline, the Tremiti diapir, within the larger Tremiti Structure. This anticline was generated by diapirism of Upper Triassic anhydrites within a thick Mesozoic to Quaternary sedimentary succession. Both internal stratal patterns and shapes of Plio‐Quaternary units, and the occurrence of an angular unconformity between early Tortonian and Pliocene rocks on the Tremiti Islands, suggest that halokinesis began during the late Miocene and is still active today. An ancient extensional SE‐dipping fault, cutting an older Mesozoic low‐amplitude anhydritic ridge, played an important role during salt mobilization, which was promoted by NW‐SE shortening. The diapir grew in the footwall of this fault, causing its upward propagation. In some places, the ancient fault served as a preferential channel for the upward migration of the anhydrites.     

A deep-seated slow movement controlled by structural setting in marly formations of Central Italy

The site investigation of low-gradient slopes composed by marly rocks usually focuses on shallow slides in weathered mantling material as it is assumed that the underlying bedrock has higher strength, but deeper investigations may reveal larger, active, deep-seated movements. A typical example of this is found in Montemartano (Perugia, Central Italy). Here aerial photo interpretation and field observations indicate that active movements involve the shallower portion of the slope, formed by a very old and large landslide body extending over an area of about 0.5 km². Borehole core logging and probe inclinometer monitoring reveal that the area corresponding to the deep-seated landslide is moving at a maximum rate of 70 mm/year down to a maximum depth of 40 m. A comparison of inclinometer and piezometer data indicates that the movement seasonally reactivates even when rainfall and piezometer levels are below average values and suggests that structural setting of the whole slope influences both groundwater flow and movement kinematics. This hypothesis is reinforced by seepage analyses and stability analyses yielding a mobilized shear strength close to residual strength of the clayey interbeds of the marly limestone formations. This implies that instability occurs along bedding over a large part of the slide. The importance of these phenomena in land management policy is discussed and the critical aspects of their investigation and monitoring are addressed. The reconstruction of landslide geometry/stratigraphy and geotechnical characterization of the materials is closely considered, particularly as these are complicated by the limited representativeness of field and laboratory investigations in this type of material.     

Comparison of pumping at constant head and at a constant rate for determining the sustainable yield of a well

Determining the yield of a production well remains one of the main problems in hydrogeological studies. Starting from the results of a 3-year-long monitoring of a continuously exploited well functioning at constant head (i.e., at a variable discharge rate), a new pumping style has been examined using numerical models. The objective is to control the impact of pumping on the aquifer in accordance with the principle of sustainability. Different models were developed in a transient state and were calibrated using discharge data of the well during the recession periods. Successively, the trends of the residual outflow from the aquifer system with the well operating at variable discharge and at constant discharge were simulated. The results indicate that the ratio of the volume of water pumped from the well to the volume of residual outflow is a significant indicator of the sustainability of groundwater withdrawals. Modeling confirms that a constant discharge rate can be derived from the information gained through a preliminary production phase of a well at constant head. This approach appears to be particularly useful when the problem is determining the sustainable yield of a single well from aquifers with low hydraulic diffusivity.     

Bonding degradation and stress–dilatancy response of weakly cemented sands

The progressive bond breakage of artificially cemented sands induced by shear straining was investigated through conventional isotropically consolidated drained triaxial compression tests. Sand specimens were prepared with a low degree of cementation by adopting a chemical grout. Test results were interpreted in terms of two stress–dilatancy theories for cohesive-frictional materials proposed in literature. The influence of debonding on the stress–dilatancy behaviour of cemented sands was analysed with particular emphasis on the ‘delayed dilatancy’ phenomenon. A bonding degradation curve was determined for each test relating the interparticle cohesion (c) to the magnitude of the total plastic strain vector (ε_d) and a bond degradation rate factor (D_c) was assessed from each curve. The maximum value of interparticle cohesion (c₀) before the onset of bond degradation under shearing was found to correspond with a sharp decrease in the soil stiffness of the specimens. The influence of the effective confining stress (p^′_c) on both c₀ and D_c parameters gathered from each test was also ascertained.     

Magnetic properties of surface sediments as proxies of recent anthropogenic pollution in the Anllóns riverbed (NW Spain)

A study of surface sediments from the Anllóns riverbed (northwestern Spain) was conducted to assess the use of their magnetic properties as proxies of recent trace element contamination (i.e., As, Zn, Pb, Cr, Ni and Cu). Thermomagnetic curves, hysteresis parameters, specific magnetic susceptibility χ, frequency-dependent magnetic susceptibility κ _FD%, magnetic remanence and saturation isothermal remanent magnetization ratios (i.e., S and SIRM/χ) reveal the presence of mostly fine-grained magnetite and maghemite in these samples. The Tomlinson Pollution Load Index (PLI), as well as the magnetic parameters χ, κ _FD%, SIRM/χ and S-ratios, vary more or less in agreement to each other when they are sequentially arranged throughout a 30-km-long transect that goes from the town of Carballo to the river mouth in Ponteceso. From that profile, it is possible to identify an anomaly of χ that lies between two small peaks of the PLI and seems to define a contaminated area probably linked to a diffuse low-impact source of pollution. There is also a conspicuous peak of the PLI that is likely associated to a nearby gold mine. The variations of the κ _FD%’s along the transect are the ones that best reflect the changes in the PLI values, regardless of the level of contamination. This result suggests that adsorption is the main mechanism of trace elements removal by Fe oxides in these samples. Direct signal analyses, used to decompose the isothermal remanent magnetization curves, reveal the presence of four magnetic fractions, with varying relative concentrations all over the profile, namely single-domain magnetite, close to the superparamagnetic threshold (SD/SP) and/or maghemite (\(\log B_{1/2}\) ca 1.2), single-domain magnetite (\(\log B_{1/2}\) ca 2), hematite (\(\log B_{1/2}\) ca 2.5) and goethite (\(\log B_{1/2}\) ca 3.5). Integrating all the available information, it was sketched out a likely sequence of events that included magnetic minerals neoformation in parent soils, their subsequent chemical transformations and the contamination episodes that affected the region.     

Ensuring very shallow-water sediment properties: case study from Capo Granitola harbour,Sicily (Italy)

We present high-resolution Vp models of the Capo Granitola harbor, Sicily (Italy) obtained by first arrival traveltime tomography. Seismic data were collected along four hydrophone arrays on the sea-bottom and via a Watergun as seismic source, in order to plan dredging operations in the harbor. Using a hydrophone spacing of 2.5 m and shot spacing of 5 m, very high resolution quality data were recorded. Seismic tomography expands existing knowledge of the harbour subsoil with a penetration of about 20 m, illuminating the Lower Pleistocene bedrock (Marsala calcarenites) that corresponds to high-Vp regions (Vp?>?4.5 km/s). Low Vp (1.8–4.5 km/s) deposits belonging to terraced calcarenites (Upper Pleistocene in age) are also well imaged; they are about 8 m thick and lie below loose sand deposits (Vp?=?1.5 km/s). The substratum has an articulated morphology; Vp images unravel small steps in the basement probably related to structural discontinuities (e.g., faults). Processing data with 3D techniques enables images of the structure and the thickness of the lithotypes to be reconstructed, thus leading to large-scale, realistic estimates of the total quantity of material to be excavated or dredged. Tomographic profiles permit clear discrimination of the soft sediment above the basement and thus allow the determination of the total volume of sediment above the seismic bedrock, estimated at about 265,000 m³.     

Origin and interaction of mafic and felsic magmas in an evolving late orogenic setting: the Early Paleozoic Terra Nova Intrusive Complex, Antarctica

The Abbott Unit (∼508 Ma) and the Vegetation Unit (∼475 Ma) of the Terra Nova Intrusive Complex (northern Victoria Land, Antarctica) represent the latest magmatic events related to the Early Paleozoic Ross Orogeny. They show different emplacement styles and depths, ranging from forcible at 0.4–0.5 GPa for the Abbott Unit to passive at ∼0.2 GPa for the Vegetation Unit. Both units consist of mafic, felsic and intermediate facies which collectively define continuous chemical trends. The most mafic rocks from both units show different enrichment in trace element and Sr-Nd isotopic signatures. Once the possible effects of upper crustal assimilation-fractional crystallisation (AFC) and lower crustal coupled AFC and magma refilling processes have been taken into account the following features are recognised: (1) the modelled primary Abbott Unit magma shows a slightly enriched incompatible element distribution, similar to common continental arc basalts and (2) the modelled primary Vegetation Unit magma displays highly enriched isotope ratios and incompatible element patterns. We interpreted these major changes in magmatic affinity and emplacement style as linked to a major change in the tectonic setting affecting melt generation, rise and emplacement of the magmas. The Abbott Unit mafic melts were derived from a mantle wedge above a subduction zone, with subcontinental lithospheric mantle marginally involved in the melting column. The Vegetation Unit mafic melts are regarded as products of a different source involving an old layer of subcontinental lithospheric mantle. The crustal evolution of both types of mafic melts is marked by significant compositional contrasts in Sr and Nd isotopes between mafic and associated felsic rocks. The crustal isotope signature showed an increase with felsic character. Geochemical variations for both units can be accounted for by a similar two-stage hybridisation process. In the first stage, the most mafic magma evolved mainly by fractional crystallisation coupled with assimilation of metasedimentary rocks having crustal time-integrated Sr and Nd compositions similar to those of locally exposed metamorphic basement. The second stage involves contaminated products mixing with independently generated crustal melts. Petrographic, geochemical and isotope data also provide evidence of significant compositional differences in the felsic end-members, pointing to the involvement of metaigneous and metasedimentary source rocks for the Abbott granite and Vegetation leucogranite, respectively. Received: 31 March 1998 / Accepted: 3 May 1999     

Flow resistance equation for rills

In this paper, a new flow resistance equation for rill flow was deduced applying dimensional analysis and self‐similarity theory. At first, the incomplete self‐similarity hypothesis was used for establishing the flow velocity distribution whose integration gives the theoretical expression of the Darcy–Weisbach friction factor. Then the deduced theoretical resistance equation was tested by some measurements of flow velocity, water depth, cross section area, wetted perimeter, and bed slope carried out in 106 reaches of some rills shaped on an experimental plot. A relationship between the velocity profile, the channel slope, and the flow Froude number was also established. The analysis showed that the Darcy–Weisbach friction factor can be accurately estimated by the proposed theoretical approach based on a power–velocity profile.     

Magnetic record of El Niño Southern Oscillation in Late Pleistocene sediments from Mucubají lake (western Venezuela)

El Niño Southern Oscillation (ENSO) is an internal forcing of the climate system. This event has an actual frequency of 2 to 8 years. Evidence from a paleoclimate proxy database of gray scale (GS), in samples from Pallcacocha lake in Ecuador, indicates that the ENSO had a frequency of 35 to 75 years during the Late Pleistocene. In this work we explored the possible relationship between the ENSO proxies (GS) from Pallcacocha and magnetic parameters from sediments sampled at the Mucubají lake in Mérida, Venezuela (i.e. mass-specific magnetic susceptibility, magnetic remanence S ratio and susceptibilitynormalized saturation isothermal remanent magnetization). After applying a Lanczos bandpass filter to the rock magnetic and the GS data, in order to remove, as much as possible, frequencies associated to any periodic event other than ENSO, we found significant correlations between GS and magnetic parameters for the period between 12450 and 10560 cal. yrs BP. These relationships were obtained using an Adaptive Neuro Fuzzy Inference System (ANFIS), a hybrid algorithm that combines fuzzy logic with neural networks. The results show that the magnetic parameters obtained in Mucubají are able to explain 50.5% of the total variance of the ENSO proxy in a range of 35 to 75 years in Pallcacocha, which is roughly the same percentage of the total variance of the temperature in the Venezuelan Andes, explained by the ENSO at present times. In this way we have inferred a possible influence of the ENSO in the Venezuelan Andes during the Late Pleistocene.