Comparison of response of moss,lichens and attic dust to geology and atmospheric pollution from copper mine

Different sampling media (moss, lichen and attic dust) were used for monitoring the distribution of 15 elements, including certain trace elements, in the vicinity of an intensively exploited copper mine in the east of the Republic of Macedonia. Moss species (Hypnum cupressiforme and Campothecium lutescens), epiphytic lichens (Hypogymnia physodes and Evernia prunastri) and attic dust were collected for comparative analysis for monitoring air pollution. In both cases (lithological and anthropogenic affected areas) for the distribution of elements, the sampling media follows the expression capabilities: attic dust > moss > lichens. Enrichment factors M/L—moss vs. lichen, for plant response to elements distribution and D/L—attic dust vs. lichen, for historical response of elements distribution were significant for Cu and Ni, which were singled out as the main markers for anthropogenic and geogenic distribution. The factor analysis highlighted geogenic (F1: Ni-Cr-Cd-Fe-Al-K-Mn-Zn) and anthropogenic (F2: As-Cu-Pb) association of elements from three types of media samples. For anthropogenic affected areas, T value and F value for Cu content were significant at p < 0.05 and higher enrichment factors were obtained for lichen, moss and attic dust media (3.8, 5.0 and 5.7, respectively). Spatial distribution for element deposition (with emphasis on Cu and Ni) is not disturbed by the significant differences in the sampling media matrix. Treated sample materials (attic dust, moss, lichen) are shown to be useful in determining an anthropogenic impact, as well as the chemical properties or geological background on orographic diverse terrain in the presence of complex geological structure.     

A critical evaluation of using bulk sediment instead of fine fraction in environmental marine studies, investigated on example of Rijeka harbor, Croatia

This work tested the preferential use of fine (<63 μm) or bulk sediment (<2 mm) in environmental research of marine sediments in the Eastern Adriatic. Fine fraction sediment containing silt and clay (<63 μm), predominating in the studied area, was examined to evaluate past and present anthropogenic inputs and to test our hypothesis that investigation of bulk sediment should be preferred. Following aqua regia digestion, chemical analyses of 58 elements were performed by ICP/OES, ICP-MS and cold vapor AAS, and statistical analysis was performed. The concentrations of the majority of the analyzed elements increased with age of the sediment, except for Ag and Sn, which had higher concentrations in recent sediments. The previous main sources of metal contamination in Rijeka harbor were now abandoned municipal-sewage outflow and oil refinery, and continuing harbor activities and antifouling paint use. All activities except of antifouling paint use have been decreasing significantly. Anomalies of selected elements were determined by the box-plot method. More anomalies were found in the bulk sediment than in the fine fraction. Results of Q-modality clustering and factor analysis in the fine fraction almost correlate with that applied on bulk sediments. Thus, it can be said that the differences between the element distribution in the bulk and fine fraction are not statistically significant. Our conclusion is that analysis of bulk marine sediment gives a better insight into the state of pollution and supports previous recommendations to use bulk sediment as a chosen media for environmental studies.     

3D modeling and monitoring of karst system as a base for its evaluation and utilization: a case study from eastern Serbia

Beljanica Mountain in eastern Serbia is a part of the Carpathian Balkan arch (northern Alpine branch). It covers an area of about 300 km² and consists mostly of Jurassic and Cretaceous limestones. Numerous surface karst features, long caves and several large karstic springs located in Beljanica’s piedmont along the contact of karstic and non-karstic rocks are all indicators of an intense karstification. Currently, the large karstic water reserves of Beljanica Mountain are not properly utilized because of their distance from main consumers, the objection by national water managers that the springs lack a stable and sufficient discharge particularly during recession periods. Due to its unpolluted and high quality water, the area is a great prospect for future water supply, and provides an opportunity for artificial regulation and for the design and implementation of specific tapping structures. This paper includes an analysis of the created 3D ArcGIS model of karst interior and its correlation with historical and newly collected data of spring discharges and groundwater physico-chemical characteristics. The results of karst aquifer monitoring (both quantitative and qualitative) are linked with the results of extensive field geological and speleological survey of the upper non-saturated part of the karst (such as sinkholes, pits and caves) and with the investigation of the permanently saturated deeper part of the aquifer (including the diving methods). The model of karst interior is based on the data from the 69 caves, 15 sinks and 1,682 dolines (sinkholes) surveyed. The total length of the karst channels network, calculated using the GIS model and presented in a 3D environment, is 647 km. The catchment areas of five major springs that drain the areas are estimated to range from only 7 km² (Malo Vrelo Spring) to 124 km² (Vrelo Mlave Spring). The groundwater exploitable reserves of Beljanica karst aquifer are estimated to be over 4 m³/s. The waters are low mineralized, unpolluted and have a great potential for water supply.     

Sandstone alterations triggered by fire-related temperatures

The aim of the study was to identify and describe changes in two different sandstone types when undergoing different environmental and extreme temperature regimes to assess the possibility of finding insolation weathering and how these sandstones would behave during and after a fire. The first step was the simulation in the laboratory of temperature regimes up to 60 °C which would correspond to extreme events that could be found in insolation cycles even in Central Europe and the second one was the temperature above 200 °C simulating in laboratory conditions the thermal regime of a potential fire situation at temperatures up to 200, 400, 600 and 800 °C. Heating the samples above 400 °C led to gradual changes in mineral composition, colour, surface roughness and physical properties reaching, eventually, total rock breakdown through spalling and granular disaggregation. The different behaviour of sandstones exposed to high temperatures is mainly caused by their different mineral composition with various ratios of minerals that are more or less chemically stable at high temperatures as well as by the differences in the porosity.     

Monitoring of heat transmission from buildings into geological environment and evaluation of soil deformation consequences in foundation engineering

In engineering geology a number of factors affecting foundation conditions are taken into consideration during engineering-geological investigations. This article deals with the factor of heat sourced from a structure (brick kiln) as a restrictive factor in foundation engineering in clay soils and introduces a documentation of soil deformation observations as an impact of the heat transmission into the geological environment. It was carried out in Southern Moravia in the Czech Republic, where the dominant foundation soils are Neogeneous clays where differential settlements of a tunnel kiln structure occurred as a result of ignoring the boundary conditions of temperature changes in the soil environment. The brick kilns caused heterogeneous spatial changes in the subsoil temperatures. This consequently resulted in differential settlements due to temperature changes originating from the kilns. The differential settlements reached as much as 150 mm. The major objective of the article is to highlight the importance of the heat transmission from buildings into the geological environment as a factor which should be considered in engineering geology and its application in planning. A new procedure for reducing or elimination of ground movements sourced from underlying clayey soils depending on the heat changes was also suggested in this context.     

Forcing mechanisms of a heavy precipitation event in the southeastern Adriatic area

The aim of this study was to identify the main mesoscale features and mechanisms responsible for the generation of an extreme precipitation event as a contribution to improving the modelling of processes that produce HPEs. The event occurred during the morning hours on 22 November 2010 over the Dubrovnik coast in Croatia and the hinterland mountain range of the southern Dinaric Alps and caused severe flash floods and landslides and consequent interruption of traffic and electricity supply as well as other infrastructural damage. The analysis is geographically focused on the southern portion of the eastern Adriatic region, which is prone to relatively frequent heavy precipitation events that occur mostly in autumn. This area is one of the rainiest in Europe with expected annual amounts of precipitation greater than 5,000 mm in the mountainous hinterland. The mechanisms responsible for the formation of convection were analysed using synop measurements, satellite data and numerical experiments performed with the WRF model, which was set up at the convection-permitting resolution in the innermost domain. Satellite data were used to identify the precipitation systems and to estimate the intensity of the precipitation during the period of interest. The development of the precipitation system was connected to a strong large-scale ascent over the southern Italy and southern Adriatic due to the advection of warm air and cyclonic vorticity advection, which increases with height. The numerical simulations highlighted the essential role of a southerly low-level jet stream in the transport of warm and moist air towards the affected area. The convergence of two branches of low-level marine air favoured convection triggered over the coast and sea. Furthermore, numerical sensitivity experiments suggested that the orography of the Dinaric Alps plays an essential role in the precipitation maximum over the mountainous hinterland, but also that the orography was not the crucial factor in the heavy precipitation near Dubrovnik. This study highlights the need for a dense network of observations, especially radar measurements, to validate the simulated mechanisms and improve numerical forecasts via data assimilation.     

Preservation of diagenetic products of β-carotene in sedimentary rocks from the Lopare Basin (Bosnia and Herzegovina)

Sedimentary rocks from the saline formation of the Lopare Basin were investigated. Sediments contain a moderate amount of immature to marginally mature algal organic matter deposited under slightly reducing to anoxic and slightly saline to hypersaline conditions. Almost all of the samples contain β-carotane in a relatively high quantity, and in some, it represents the most abundant compound in the total distribution of hydrocarbons. The objective of the study was to determine the conditions that are favourable to precursors of β-carotene and/or the preservation of the carotenoid hydrocarbon skeleton. Moreover, the dominant transformation pathways of β-carotene under different redox and salinity conditions, which lead to the formation of aromatic carotenoids were defined.     

Vulnerability to natural disasters in Serbia: spatial and temporal comparison

The frequency of natural disasters and the extent of their consequences at a global level are constantly increasing. This trend is partially caused by increased population vulnerability, which implies the degree of population vulnerability due to high-magnitude natural processes. This paper presents an analysis of vulnerability to natural disaster in Serbia in the second half of the twentieth and the early twenty-first century. Vulnerability changes were traced on the basis of demographic–economic indicators derived from statistical data for local government units (municipalities) provided by the Statistical Office of the Republic of Serbia. Calculations were performed in the geographical information system environment. The results of the study show that spatial and temporal vulnerability variations are causally correlated with changes in the selected components. Significant rise of vulnerability is related to urban areas, while lower values are characteristic for other areas of Serbia; this is primarily a consequence of different population density.