The application of auto-temperature-controlled ventilation embankment in Qinghai-Tibet Railway

Auto-temperature-controlled ventilation embankment is an effective engineering measure for “cooling roadbed”. Practice proves that this new method can sufficiently make use of natural cold energy. It has the advantages of higher efficiency, better cooling effect and feasibility in engineering practice, and wider application in various environment, etc. And also, it is comparatively cheap in project cost. Through practice in the field for half a year, the testing results show that, with the application of auto-temperature-controlled system, the artificial permafrost table has been raised by 65 cm. The artificial permafrost table was basically at the embankment bottom, and the action of freeze-thaw circle on engineering stability was effectively avoided. In the month with highest ground temperature, in the scope with 1–4 m in depth, including the majority of the embankment and the upper part in the original seasonal layer, the ground temperature decreased by 0.7°C. Through thermal flux calculation in the original seasonal layer, in the month with the maximum thermal flux coming into permafrost, it is found that the thermal flux reduces nearly by half. Coming into the cooling period for nearly a month, the ground temperature in entire auto-temperature-controlled embankment is close to zero, and the foundation is at negative temperature. But in a large region in the embankment and foundation the ground temperature was over 0°C and varied from 0°C to0.39°C in ordinary ventilation embankment.     

Estimating the seismic displacement of friction pendulum isolators based on non‐linear response history analysis

A procedure for developing equations that estimate the isolator displacement due to strong ground motion is applied to buildings isolated with the friction pendulum system. The resulting design equations, based on rigorous non‐linear analysis, offer an alternative to the iterative equivalent‐linear methods used by current U.S. building codes. The governing equations of the system are reduced to a form such that the median normalized displacement of the system due to an ensemble of ground motions is found to depend on only the isolation period—a function of the curvature of the isolator—and the friction force at incipient slip normalized by peak ground velocity. The normalization is effective in minimizing the dispersion of the normalized displacement for an ensemble of ground motions, implying that the median normalized displacement is a reliable estimate of response. The design equations reflect the significant (20 to 38%) increase in displacement when the excitation includes two lateral components of ground motion instead of just one component. Equivalent‐linear methods are shown to underestimate by up to 30% the exact median displacement determined by non‐linear response history analysis for one component of ground motion, and building codes include at most a 4.4% increase for a second component. Copyright © 2003 John Wiley & Sons, Ltd.     

Uniting space, ground, and underwater measurements for improved estimates of rain rate

Global precipitation is monitored from a variety of platforms including spaceborne, ground-, and ocean-based platforms. Intercomparisons of these observations are crucial to validating the measurements and providing confidence for each measurement technique. Probability distribution functions of rain rates are used to compare satellite and ground-based radar observations. A preferred adjustment technique for improving rain rate distribution estimates is identified using measurements from ground-based radar and rain gauges within the coverage area of the radar. The underwater measurement of rainfall shows similarities to radar measurements, but with intermediate spatial resolution and high temporal resolution. Reconciling these different measurement techniques provides understanding and confidence for all of the methods.     

Land cover dynamics in Garhwal Himalayas — a case study of balkhila sub-watershed

The present paper focuses on land cover dynamics pattern in Balkhila sub-watershed situated in Garhwal Himalayas. This study contributes example from human shaped ecosystem in mountainous regions where fragmentation of natural resources is active. The remote sensing and GIS has been used to understand the land cover dynamics along the topography. The results report that the land cover dynamics is dependent on the aspect due to sun illumination. The altitude and slope are no more a barrier for resource extraction and the human activity zone is shifting towards higher altitudes and slopes. The changes are also defined along the road and settlements.     

An automated seamless mosaicing system of multi-charge coupled devices of panchromatic data

Panchromatic data of pixel resolution 5.8 m obtained from IRS-1C and IRS-1D satellites proved to be very useful for mapping purposes. One of the popular data product is the 70 km swath mosaic which is covered by a combination of 3 CCD line sensors, each with 4096 pixels. Each CCD-line sensor with different imaging times causes geometric problems of mosaicing three strips data together. In this paper, we propose the details of the design elements of system that caters to the need for accurate and automatic multi strip image registration without any second resampling of the data. The systematic geometric correction grid mapping is improved to facilitate accurate mosaicing by automatic image registration task that makes use of the overlap data within image strips and image registration is achieved up to sub-pixel level.     

Web-cam’s potential for collaborative activities in the Earth sciences

We report here our experiences from using easily acquired web-cam components for collaborative ventures in the Earth sciences. We have used a variety of hardware and different software. We demonstrate from various locations in the U.S.A. the feasibility of using web-cam in multitudinous activities, relevant for conducting research and knowledge dissemination. We summarize the quality of the connections from the various combinations of communicating parties. Today, web-cams can be utilized as an economical and viable means of point-to-point communication in the Earth science community. Greater bandwidth is sorely needed for activities such as multi-party conferencing on the present internet network. We propose that web-cam can be readily deployed as a web-service for facilitating collaborative research over the GRID infrastructure, using the middleware Narada-Brokering. Web-cam will play an important role in the emerging field of geoinformatics.     

Organic matter in small mesopores in sediments and soils

The three-way correlation among organic matter concentrations, specific surface area and small mesopores observed for many soils and sediments led to the hypothesis that enclosure within the pores might explain the apparent protection of organic matter by minerals. We test this hypothesis by examining whether the bulk of organic matter resides within small mesopores. Pore volumes as a function of pore width were measured before and after organic matter removal, and the volume differences ascribed to organic matter filling of pores. Minor changes in small mesopore size distributions upon treatments such as centrifugation and muffling indicate the robustness of the mineral matrices that form these pores. We developed an additional method to assess organic matter densities using high-resolution pycnometry, and used these densities to convert pore volumes to organic matter contents. Although smaller mesopores are shown to have sufficient volumes to contain significant fractions of the total organic matter, only small fractions of total organic matter were found to reside in them. These results are consistent with preferential association between organic matter and aluminous clay particle edges, rather than the largely siliceous clay faces that contribute most surface area and form pore walls. While simple enclosure within smaller mesopores cannot, therefore, explain protection, network effects working at larger size scales may account for exclusion of digestive agents and hence organic matter protection.     

Sulfur contents of the parental metallic cores of magmatic iron meteorites

Magmatic iron meteorites are thought to be samples of the central metallic cores of asteroid-sized parent bodies. Sulfur is believed to have been an important constituent of these parental cores, but due to the low solubility of S in solid metal, initial S-contents for the magmatic groups cannot be determined through direct measurements of the iron meteorites. However, experimental solid metal-liquid metal partition coefficients show a strong dependence on the S-content of the metallic liquid. Thus, by using the experimental partition coefficients to model the fractional crystallization trends within magmatic iron meteorite groups, the S-contents of the parental cores can be indirectly estimated. Modeling the Au, Ga, Ge, and Ir fractionations in four of the largest magmatic iron meteorite groups leads to best estimates for the S-contents of the parental cores of 12 ± 1.5 wt% for the IIIAB group, 17 ± 1.5 wt% for the IIAB group, and 1 ± 1 wt% for the IVB group. The IVA elemental fractionations are not adequately fit by a simple fractional crystallization model with a unique initial S-content. These S-content estimates are much higher than those recently inferred from crystallization models involving trapped melt. The discrepancy is due largely to the different partition coefficients that are used by the two models. When only partition coefficients that are consistent with the experimental data are used, the trapped melt model, and the low S-contents it advocates, cannot match the Ge and Ir fractionations that are observed in IIIAB iron meteorites.     

Beryllium-10 in Australasian tektites: Constraints on the location of the source crater

By using accelerator mass spectrometry we have measured the ¹⁰Be concentrations of 86 Australasian tektites. Corrected to the time of tektite production ∼0.8 My ago, the ¹⁰Be concentrations (10⁶ atom/g) range from 59 for a layered tektite from Huai Sai, Thailand, to 280 for an australite from New South Wales, Australia. The average value is 143 ± 50. When tektites are sorted by country, their average measured ¹⁰Be concentrations increase slowly with increasing distance from Southeast Asia, the probable location of the tektite producing event, from 59 ± 9 for 6 layered tektites from Laos to 136 ± 20 for 20 splash-form tektites from Australia. The lowest ¹⁰Be concentrations for tektites fall on or within a contour centered off the shore of Vietnam, south of the Gulf of Tonkin (107°E; 17°N), but also encompassing two other locations in the area of northeastern Thailand previously proposed for the site of a single tektite-producing impact. The ¹⁰Be concentrations of layered tektites show only a weak anticorrelation (R ∼ −0.3) with the numbers of relict crystalline inclusions.Loosely consolidated, fine-grained terrestrial sediments or recently consolidated sedimentary rocks are the most likely precursor materials. Dilution of sediments with other kinds of rock raises problems in mixing and is not supported by petrographic data. Sedimentary columns that have the right range of ¹⁰Be concentrations occur off the coasts of places where sedimentation rates are high relative to those in the deep sea. A single impact into such a region, 15 to 300 m thick, could have propelled near-surface, high-¹⁰Be material farthest—to Australia—while keeping the deeper-lying, low-¹⁰Be layers closer to home. We do not rule out, however, other proposed mechanisms for tektite formation.     

High-Ti type N-MORB parentage of basalts from the south Andaman ophiolite suite,India

A complete dismembered sequence of ophiolite is well exposed in the south Andaman region that mainly comprises ultramafic cumulates, serpentinite mafic plutonic and dyke rocks, pillow lava, radiolarian chert, and plagiogranite. Pillow lavas of basaltic composition occupy a major part of the Andaman ophiolite suite (AOS). These basalts are well exposed all along the east coast of southern part of the south AOS. Although these basalts are altered due to low-grade metamorphism and late hydrothermal processes, their igneous textures are still preserved. These basalts are mostly either aphyric or phyric in nature. Aphyric type exhibits intersertal or variolitic textures, whereas phyric variety shows porphyritic or sub-ophitic textures. The content of alkalies and silica classify these basalts as sub-alkaline basalts and alkaline basalts. A few samples show basaltic andesite, trachy-basalt, or basanitic chemical composition. High-field strength element (HFSE) geochemistry suggests that studied basalt samples are probably derived from similar parental magmas. Al₂O₃/TiO₂ and CaO/TiO₂ ratios classify these basalts as high-Ti type basalt. On the basis of these ratios and many discriminant functions and diagrams, it is suggested that the studied basalts, associated with Andaman ophiolite suite, were derived from magma similar to N-MORB and emplaced in the mid-oceanic ridge tectonic setting.