Roles of Biogeochemical Processes in the Oceanic Carbon Cycle Described with a Simple Coupled Physical-Biogeochemical Model

To evaluate the contribution of biogeochemical processes to the oceanic carbon cycle and to calculate the ratio of calcium carbonate to organic carbon downward export, we have incorporated biological and alkalinity pumps in the yoked high-latitude exchange/interior diffusion-advection (YOLDA) model. The biogeochemical processes are represented by four parameters. The values of the parameters are tuned so that the model can reproduce the observed phosphate and alkalinity distributions in each oceanic region. The sensitivity of the model to the biogeochemical parameters shows that biological production rates in the euphotic zone and decomposition depths of particulate matters significantly influence horizontal and vertical distributions of biogeochemical substances. The modeled vertical fluxes of particulate organic phosphorus and calcium carbonate are converted to vertical carbon fluxes by the biological pump and the alkalinity pump, respectively. The downward carbon flux from the surface layer to the deep layer in the entire region is estimated to be 3.36 PgC/yr, which consists of 2.93 PgC/yr from the biological pump and 0.43 PgC/yr from the alkalinity pump, which is consistent with previous studies. The modeled rain ratio is higher with depth and higher in the Pacific and Indian Oceans than in the Atlantic Ocean. The global rain ratio at the surface layer is calculated to be 0.14 to 0.15. This value lies between the lower and higher ends of the previous estimates, which range widely from 0.05 to 0.25. This study indicates that the rain ratio is unlikely to be higher than 0.15, at least in the surface waters.     

Evidence of hyperpycnal flows at the head of the meandering Kaoping Canyon off SW Taiwan

Using seismic and Chirp sonar profiles, this paper tests the hypothesis that hyperpycnal flows are the main factor controlling the formation and maintenance of the meandering Kaoping submarine canyon off SW Taiwan. Cross-section geometries, and erosional as well as depositional features vary along the canyon course. In the proximal, sinuous part of the canyon, down-cutting into the shelf strata has created a relief of 340 m. The cause of this intense erosion of the seafloor is suggested to be the frequent development of hyperpycnal flows. A seismic section across a meander in the distal part of the canyon shows levees formed by overspilled sediments at the outer bend, and a terrace characterized by relatively flat stratified facies at the inner bend. The geological setting and climatic conditions in SW Taiwan (e.g. earthquakes, typhoons, floods), as well as major river–canyon connections (for example, direct input of highly concentrated suspended sediment) would all promote hyperpycnal flow generation. This causes axial incision, canyon wall slumping, and the formation of levees by spill-over deposition in the upper reach of the Kaoping Canyon.     

Sediment resuspension events induced by the wake wash of deep-draft vessels

Hydrodynamics and sediment resuspension events, induced at the shoreline by a deep-draft vessel passing nearby, are described. Measurements (pressure, currents and turbidity) were obtained at 4 Hz, on a lower beach ~50 m from a channel where large car ferries operate in Wootton Creek, Isle of Wight. The study focuses on a representative 8-min 32-s-long record, during which two large vessels passed the channel section. At the shore, the passage of each vessel induced a long-period water-level drawdown, followed by a water-level oscillation (seiche) of similar period, and the short-period waves of the wake. Both drawdowns were the main constituents of the prevailing wave pattern. The second drawdown was the largest in amplitude, in response to a higher speed of the ferry, and the influence of the seiche which had been activated during the preceding event. Two successive peaks of turbidity were observed shortly after this drawdown. Analyses of current velocity and direction indicate that the sediments resuspended originated from the shallower upper beach. Anthropogenically induced erosion of the foreshore is predicted at Wootton Creek.     

Evidence of NW extension of the North Anatolian Fault Zone in the Marmara Sea: a new interpretation of the Marmara Sea (Izmit) earthquake on 17 August 1999

Active faults aligning in NW–SE direction and forming flower structures of strike-slip faults were observed in shallow seismic data from the shelf offshore of Avcılar in the northern Marmara Sea. By following the parallel drainage pattern and scarps, these faults were traced as NW–SE-directed lineaments in the morphology of the northern onshore sector of the Marmara Sea (eastern Thrace Peninsula). Right-lateral displacements in two watersheds of drainage and on the coast of the Marmara Sea and Black Sea are associated with these lineaments. This right-lateral displacement along the course of these faults suggests a new, active strike-slip fault zone located at the NW extension of the northern boundary fault of the ?ınarcık Basin in the Marmara Sea. This new fault zone is interpreted as the NW extension of the northern branch of the North Anatolian Fault Zone (NAFZ), extending from the ?ınarcık Basin of the Marmara Sea to the Black Sea coast of the Thrace Peninsula, and passing through B üy ük ?ekmece and K ü ? ük ?ekmece lagoons. These data suggest that the rupture of the 17 August 1999 earthquake in the NAFZ may have extended through Avcılar. Indeed, Avcılar and İzmit, both located on the Marmara Sea coast along the rupture route, were strongly struck by the earthquake whereas the settlements between Avcılar and İzmit were much less affected. Therefore, this interpretation can explain the extraordinary damage in Avcılar, based on the newly discovered rupture of the NAFZ in the Marmara Sea. However, this suggestion needs to be confirmed by further seismological studies.     

Water fluxes through the Cretan Arc Straits, Eastern Mediterranean Sea: March 1994 to June 1995

Five research cruises were undertaken incorporating ADCP sections along the Cretan Arc Straits and CTD surveys covering the entire area of the Straits and the Cretan Sea. In addition, six moorings (with 15 current meters) were deployed within the Straits, which monitored flows in the surface (50 m), intermediate (250 m), and deep (50 m from the bottom) layers. The ADCP, CM, and CTD datasets enable the derivation of water transports through the Cretan Arc Straits to be assessed. Flow structure through the Cretan Arc Straits is not the typical flow regime with a surface inflow and deep outflow, instead there is a persistent deep outflow of Cretan Deep Water (CDW) (σ_θ>29.2) with an annual mean of ˜0.6 Sv, through the Antikithira and Kassos Straits at depths below 400 m and 500 m, respectively. CDW outflowing transports are higher (˜0.8 Sv) in April–June, and lower (˜0.3 Sv) in October–December. Within the upper water layer (0–˜400 m), the transport and the water exchanges through the Straits are controlled by local circulation features, which weaken substantially below 200 m. The Asia Minor Current (AMC) influences the Rhodes and the Karpathos Straits, resulting in a net inflow of water. In contrast, the Mirtoan/West Cretan Cyclone influences the Antikithira and Kithira Straits, where there is a net outflow. In the Kassos Strait, there is a complex interaction between the East Cretan Cyclone, the Ierapetra Anticyclone and the westward extension of the Rhodes Gyre, which results in a variable flow regime. There is a net inflow in autumn and early winter, and a switch to a net outflow in early spring and summer. The total inflow and outflow, throughout all of the Straits, ranged from ˜2 to ˜3.5 Sv, with higher values in autumn and early winter and lower in summer. The AMC carries ˜2 Sv of inflow through the Rhodes and Karpathos Straits, and this accounts for 60–80% of the total inflow. About 10–15% of the total outflow is of CDW, and a further 45–70% occurs through the upper 400 m of the Kithira and Antikithira Straits. The Kassos Strait exhibits a net inflow of ˜0.7 Sv in autumn and early winter, with a net outflow of ˜0.5 Sv in early spring and summer.     

Mytilus californianus as an indicator of heavy metals on the northwest coast of Baja California, Mexico.

Samples of Mytilus californianus were analyzed to determine the spatial and temporal distribution of Ag, Al, Cd, Cr, Cu, Mn, Pb and Zn concentrations on the northwest coast of Baja California and to compare the results with levels reported for California, USA. The samples were collected at eight sites from the US-Mexican border to San Quintín, BC (300 km south of the border) in February and July 1982 and 1994. During both years, north-south gradients in the concentration of Ag and Pb were observed, with the highest values close to the US-Mexican border (Ag = 0.60-1.54 and Pb = 0.21-2.89 micrograms g-1) and the lowest in the southern part of the study area (Ag = 0.05-0.10 and Pb = not detectable-0.03 microgram g-1). The Ag and Pb gradients suggest that their distributions are affected by anthropogenic activities close to the US-Mexican border. South-north gradients in the concentration of Cd (minimum = 0.59-2.16 and maximum = 2.61-12.93 micrograms g-1), for both 1982 and 1994, were observed. The geographic annual means of Pb for California (average of six stations along the entire state) were significantly higher than those of this study (average of the eight sampling sites) in 1982 and 1994. Cu in California was significantly greater than that of this study only in 1994. Cluster analyses on all metals indicate three similar geographic zones in 1982 and 1994, suggesting a relative consistency in the processes that determine the spatial variability of the concentration of some metals in M. californianus on the northwest coast of Baja California.     

Crustal structure of the Southwest Subbasin,South China Sea,from wide-angle seismic tomography and seismic reflection imaging

The Southwest Subbasin (SWSB) is an abyssal subbasin in the South China Sea (SCS), with many debates on its neotectonic process and crustal structure. Using two-dimensional seismic tomography in the SWSB, we derived a detailed P-wave velocity model of the basin area and the northern margin. The entire profile is approximately 311-km-long and consists of twelve oceanic bottom seismometers (OBSs). The average thickness of the crust beneath the basin is 5.3 km, and the Moho interface is relatively flat (10–12 km). No high velocity bodies are observed, and only two thin high-velocity structures (~7.3 km/s) in the layer 3 are identified beneath the northern continent-ocean transition (COT) and the extinct spreading center. By analyzing the P-wave velocity model, we believe that the crust of the basin is a typical oceanic crust. Combined with the high resolution multi-channel seismic profile (MCS), we conclude that the profile shows asymmetric structural characteristics in the basin area. The continental margin also shows asymmetric crust between the north and south sides, which may be related to the large scale detachment fault that has developed in the southern margin. The magma supply decreased as the expansion of the SWSB from the east to the west.     

A catastrophe progression approach based index sensitivity analysis model for the multivariate flooding process

Flood mitigation should deal with those most sensitive flooding elements to very efficiently release risks and reduce losses. Present the most concerns of flood control are peak level or peak discharge which, however, may not always be the most sensitive flooding element. Actually, along with human activities and climate change, floods bring threats to bear on human beings appear in not only peak level and peak discharge, but also other elements like maximum 24-h volume and maximum 72-h volume. In this paper, by collecting six key flooding intensity indices (elements), a catastrophe progression approach based sensitivity analysis algorithm model is developed to identify the indices that mostly control over the flood intensity. The indices sensitivity is determined through a selected case study in the Wujiang River, South China, based on half a century of flow record. The model results indicate that there is no evident relationship of interplay among the index sensitivities, but the variability of the index sensitivity is closely related to the index variability and the index sensitivity increases with the decrease of index value. It is found that peak discharge is not the most influential flooding factor as is generally thought in this case. The sensitivity value of the maximum 24-h volume is the greatest influential factor among all the other indices, indicating that this index plays a leading role in the flood threat of the Wujiang River, South China. It is inferred that, for the purpose of flood warning and mitigation, the peak flood discharge is not always the most sensitive and dominant index as opposed to the others, depending on the sensitivity.     

A direct scaling analysis for the sea level rise

The estimation of long-term sea level variability is of primary importance for a climate change assessment. Despite the value of the subject, no scientific consensus has yet been reached on the existing acceleration in observed values. The existence of this acceleration is crucial for coastal protection planning purposes. The absence of the acceleration would enhance the debate on the general validity of current future projections. Methodologically, the evaluation of the acceleration is a controversial and still open discussion, reported in a number of review articles, which illustrate the state-of-art in the field of sea level research. In the present paper, the well-proven direct scaling analysis approach is proposed in order to describe the long-term sea level variability at 12 worldwide-selected tide gauge stations. For each of the stations, it has been shown that the long-term sea level variability exhibits a trimodal scaling behaviour, which can be modelled by a power law with three different pairs of shape and scale parameters. Compared to alternative methods in literature, which take into account multiple correlated factors, this simple method allows to reduce the uncertainties on the sea level rise parameters estimation.