The petrogenesis of type B1 Ca‐Al‐rich inclusions: The spinel perspective

Abstract— Minor element variations in MgAl₂O₄ spinel from the type B1 calcium‐aluminum‐rich inclusion (CAI) Allende TS‐34 confirm earlier studies in showing correlations between the minor element chemistry of spinels with their location within the inclusion and with the chemistry of host silicate phases. These correlations result from a combination of crystallization of a liquid produced by re‐melting event(s) and local re‐equilibration during subsolidus reheating. The correlation of the Ti and V in spinel inclusions with the Ti and V in the adjacent host clinopyroxene can be qualitatively explained by spinel and clinopyroxene crystallization prior to melilite, following a partial melting event. There are, however, difficulties in quantitative modeling of the observed trends, and it is easier to explain the Ti correlation in terms of complete re‐equilibration. The correlation of V in spinel inclusions with that in the adjacent host clinopyroxene also cannot be quantitatively modeled by fractional crystallization of the liquid produced by re‐melting, but it can be explained by partial re‐equilibration. The distinct V and Ti concentrations in spinel inclusions in melilite from the edge regions of the CAI are best explained as being affected by only a minor degree of re‐equilibration. The center melilites and included spinels formed during crystallization of the liquid produced by re‐melting, while the edge melilites and included spinels are primary. The oxygen isotope compositions of TS‐34 spinels are uniformly ¹⁶O‐rich, regardless of the host silicate phase or its location within the inclusion. Similar to other type B1 CAIs, clinopyroxene is ¹⁶O‐rich, but melilite is relatively ¹⁶O‐poor. These data require that the oxygen isotope exchange in TS‐34 melilite occurred subsequent to the last re‐melting event.     

Measuring impact crater depth throughout the solar system

One important, almost ubiquitous, tool for understanding the surfaces of solid bodies throughout the solar system is the study of impact craters. While measuring a distribution of crater diameters and locations is an important tool for a wide variety of studies, so too is measuring a crater's “depth.” Depth can inform numerous studies including the strength of a surface and modification rates in the local environment. There is, however, no standard data set, definition, or technique to perform this data-gathering task, and the abundance of different definitions of “depth” and methods for estimating that quantity can lead to misunderstandings in and of the literature. In this review, we describe a wide variety of data sets and methods to analyze those data sets that have been, are currently, or could be used to derive different types of crater depth measurements. We also recommend certain nomenclature in doing so to help standardize practice in the field. We present a review section of all crater depths that have been published on different solar system bodies which shows how the field has evolved through time and how some common assumptions might not be wholly accurate. We conclude with several recommendations for researchers which could help different data sets to be more easily understood and compared.     

Experimental studies of thermal radiation intensity dependence on near-water wind speed for rough sea surface

The results of in situ measurements of the characteristics of intrinsic microwave radiation from the sea surface are presented. The studies were carried out on the oceanographic platform of the Experimental Department of Marine Hydrophysical Institute during the summer–fall periods for 3 years, which made it possible to accumulate a significant amount of information on the change in the radiation intensity of under different meteorological conditions. Attention is primarily focused on the construction of wind-radiation dependences and their steepness analysis based on the measurement data obtained by a radiometer-polarimeter with a central frequency of received radiation equal to 37.7 GHz. The results are compared with the previous experimental studies and the model estimates of this effect.     

Use of composite data sets for source-tracking enterococci in the water column and shoreline interstitial waters on Pensacola Beach, Florida

Sources of Enterococcus faecalis isolates from Pensacola Beach, FL. were identified using a library-based approach by applying the statistical method of average similarity to single and composite data sets generated from separate analyses. Data sets included antibiotic resistance analysis (ARA), rep-fingerprints, and fatty acid methyl ester (FAME) profiles. Use of a composite data set composed of ARA and rep-fingerprints, added to the confidence of the identifications. The addition of FAME data to composite data sets did not add to the confidence of identifications. Source identification was performed to better understand risk associated with higher densities of enterococci found in swash zone interstitial water (SZIW) as compared to adjacent bathing water on Pensacola Beach, FL. The "swash zone" is that area of the beach continually washed over by waves. As the potential sources of enterococci were limited in this environment, only two library units, sea gull and human, were constructed. Identification of the beach isolates using a composite data set indicated a sea gull origin. The clonality of the beach isolates suggested that the beach environment selects certain subspecies of E. faecalis.     

Water Resources Planning and Climate Change Assessment Methods

This paper, which provides background for other papers in the volume, first reviews the nature and development of water resources planning and evaluation criteria at the Federal level in the United States. These criteria constitute a highly developed, complex set of guidelines for project planning and evaluation. The level of development of these criteria and their long historical development from theoretical foundations must be taken into account in relating global climate change to possible changes in planning criteria. Second, the essentials of water project planning and evaluation, including benefit-cost principles and more complex concepts of social decision-making, are outlined. Third, the paper provides an overview of global climate change assessment methods, including impact assessment and integrated assessment. Impact assessment uses a relatively straightforward comparison of with and without situations; integrated assessment attempts to improve on impact assessment by developing more complex models that incorporate a range of feedbacks and interrelationships.     

Intermetallic compounds,copper and palladium alloys in Au–Pd ore of the Skaergaard pluton,Greenland

Copper–palladium intermetallic compounds and alloys (2314 grains) from the Au–Pd ore of the Skaergaard layered gabbroic pluton have been studied. Skaergaardite PdCu, nielsenite PdCu₃, (Cu,Pd)_β, (Cu,Pd)_α, (Pd,Cu,Au,Pt) alloys, and native palladium have been identified as a result of 1680 microprobe analyses. The average compositions and various chemical varieties of these minerals are characterized, as well as vertical and lateral zoning in distribution of noble metals. The primary Pd–Cu alloys were formed within a wide temperature interval broadly synchronously with cooling and crystallization of host gabbro and in close association with separation of Fe–Cu sulfide liquid. In the course of crystallization of residual gabbroic melt enriched in iron, noble and heavy metals and saturated with the supercritical aqueous fluid, PGE and Au are selectively concentrated in the Fe–Cu sulfide phase as Pd–Cu and Cu–Au alloys.     

Hydrogeologic studies for nuclear-waste disposal in Sweden

Safety Report 1997 (SR 97) of the Swedish Nuclear Fuel and Waste Management Company is a comprehensive performance assessment of three hypothetical radioactive waste repositories in Sweden. It includes hydrogeologic studies (data compilation, parameter synthesis, and groundwater flow modeling) to determine groundwater flow and the associated uncertainties for the three sites. This report reviews and compares the hydrogeologic characterization programs, the site characteristics, and the groundwater flow models used in the SR 97 performance assessment. Although differences in site-characterization programs tend to mask differences in site characteristics, the sites do have notable differences that affect the results of the performance assessment. The effects of model uncertainties evaluated by the variant cases appear to be smaller than the variability of results for the base case (best estimate of site conditions) of each site. Electronic Publication     

Engineering geology of loess and loess-like deposits: a commentary on the Russian literature

Loess and loess-like deposits were much studied in the Soviet Union, and are currently under investigation in Russia and surrounding countries. There is a vast literature in Russian, which touches on all aspects of loess science and technology. In particular, the studies of the origin of collapsibility are almost totally in Russian, and of course studies on the various regions of Russia and the countries of the Former Soviet Union FSU appear in Russian. This review looks at the literature in Russian and attempts to pick out key contributors, major topics and works and to identify the critical regions and zones of investigation. Because so many regions of the FSU had people living on loess ground, there is a vast literature on engineering geology and ground engineering topics, and this tends to dominate all the literature on loess in Russian. Following Russian practice, the fine-grained deposits under consideration are divided into loess and loess-like deposits. Three main topics are recognised across the whole spectrum of loess research: formation and distribution of loess deposits; stratigraphy, cyclicity and palaeoclimatology; and engineering topics, in particular hydrocollapse and subsidence, and we concentrate on the engineering geology topics. An attempt is made, based on the map of Abelev and Abelev [Abelev, Yu.M., Abelev, M.Yu., 1968. Fundamentals of design and construction on collapsible macroporous soils, 2nd ed. Stroiizdat, Moscow, 431 pp. (in Russian)] of collapsing loess deposits, to define seven loess regions within the geographical limits of the old USSR. The seven regions are those where geotechnical problems might be expected.     

Petromagnetic and paleomagnetic characterization deposits at Mesozoic/Cenozoic boundary: The Tetritskaro section (Georgia)

Petromagnetic and magnetostratigraphic characteristics are obtained for the Tetritskaro section. The boundary layer at the Mesozoic/Cenozoic (K/T) boundary is fixed primarily by an abrupt rise in the paramagnetic magnetization (total Fe concentration) and, to a lesser degree, by an increase in the concentration of such magnetic minerals as goethite, hemoilmenite, and magnetite. The along-section distribution of titanomagnetite of volcanic origin and metallic iron of cosmic origin does not correlate with the K/T boundary and lithologic properties of the sediments.The boundary of the Mesozoic and Cenozoic geological eras lies within the reversed polarity chron C29r and is marked by an abrupt rise in the geomagnetic field paleointensity and an instability of paleomagnetic directions, rather than by a polarity change. The accumulation time of the boundary clay layer is about 1.5–2 kyr, while abrupt changes in the paleointensity and direction of the geomagnetic field encompass 30–40 kyr. Such long occurrence intervals of the events in question cannot be related to a short-term impact phenomenon.