High-resolution ion-microprobe measurement of lead isotopes: Variations within single zircons from Lac Seul,northwestern Ontario

Selected-area measurements of lead-isotope ratios in zircons have been made at high mass resolution using a modified A.E.I. IM20 ion-microprobe. At a working resolution of 3200 it is shown that the important interfering molecular peaks generated from the zircon matrix may be separated from atomic lead peaks. Corrections for overlapping peaks, which are necessary in measurements of lead isotopes at low mass resolution, are then only required for ²⁰⁸Pb.Measurements on N.B.S. standards show no isotope discrimination within counting statistics. Determination of ²⁰⁷Pb/²⁰⁶Pb on 29 single zircon grains from a tonalite gneiss and a granite from Lac Seul, northwestern Ontario, give very variable ratios with mean values close to those of bulk separates. Peaks in the distribution of 207/206 ratios obtained from the tonalite gneiss may be interpreted as evidence for two stages of lead loss. High 207/206 ratios are shown to be significant for at least two zircons and probably record a minimum age of formation of 3.3 ± 0.1 b.y. for the gneiss.     

Geoeffective Disturbances in the Solar Wind near the Solar Activity Minimum according to the Data of a Two-year Series of Observations of Interplanetary Scintillations with the BSA LPI Radio Telescope

Astronomy Reports - A joint analysis of the monitoring data of interplanetary scintillations with solar and geophysical data showed that at the descending phase of the 24 solar activity cycle, the...     

Regional scale evapotranspiration estimation using satellite derived albedo and surface temperature

In the studies reteted to surface energy balance, satellite data provides important inputs for estimating regional surface albedo and evapotranspiration. The paper describes the use of satellite data in determining the surface emissivity over heterogeneous a’reas by taking Normalized Difference Vegetation Index (NDVI) as modulating parameter at pixel resolution. The estimated emissivity values have been used to find the surface temperature at the pixel scale. Landsat-TM-visible, NIR, TIR bands data and some ground meteorological data have been used in an energy balance model for estimating surface albedo and evapotranspiration. The ET values derived from the model are in good agreement with the values obtained with. ‘CENTURY MODEL’ and ground observations over the area, suggesting the possible use of this approach fot regional scale studies on evapotranspiration.     

Applying landscape-ecological concept and GIS modelling for assessing and mapping of ecological situation of mountainous landscapes (on the case of Syunik marz,Armenia)

Regional landscape-ecological studies have acquired a special topicality as they assure efficient environmental conservation and sustainable use of natural resources. A landscape-ecological analysis was performed based on four basic integral indices: (1) ecological potential, (2) ecological stability, (3) ecological load and (4) ecological tension. The values of basic integral indices of the landscape-ecological analysis were calculated as sums of respective factors expressed in scores and multiplied by their significance reflecting coefficients. In agreement with that rule, a formula was derived of calculation of basic indices of landscape-ecological analysis. Subsequently, those factors were integrated by ‘Model Builder’ in ArcGIS applying ‘Weighted Sum’ functions. Finally, through geographic information systems modelling, maps of basic indices of landscape-ecological analysis were produced. In conclusion – ecological potential, stability, load and tension are best indicators for the assessment of the landscape-ecological situation of the studied territory.     

Urbanization and child growth failure in Sub-Saharan Africa: a geographical analysis

Journal of Geographical Systems - This paper raises a fundamental question about Sub-Saharan Africa: has urbanization there been accompanied by improvements in personal wellbeing? It then proceeds...     

Canadian gravimetric geoid model 2010

A new gravimetric geoid model, Canadian Gravimetric Geoid 2010 (CGG2010), has been developed to upgrade the previous geoid model CGG2005. CGG2010 represents the separation between the reference ellipsoid of GRS80 and the Earth’s equipotential surface of $W_0=62{,}636{,}855.69~\mathrm{m}^2\mathrm{s}^{-2}$ W 0 = 62 , 636 , 855.69 m 2 s ? 2 . The Stokes–Helmert method has been re-formulated for the determination of CGG2010 by a new Stokes kernel modification. It reduces the effect of the systematic error in the Canadian terrestrial gravity data on the geoid to the level below 2 cm from about 20 cm using other existing modification techniques, and renders a smooth spectral combination of the satellite and terrestrial gravity data. The long wavelength components of CGG2010 include the GOCE contribution contained in a combined GRACE and GOCE geopotential model: GOCO01S, which ranges from $-20.1$ ? 20.1 to 16.7 cm with an RMS of 2.9 cm. Improvement has been also achieved through the refinement of geoid modelling procedure and the use of new data. (1) The downward continuation effect has been accounted accurately ranging from $-22.1$ ? 22.1 to 16.5 cm with an RMS of 0.9 cm. (2) The geoid residual from the Stokes integral is reduced to 4 cm in RMS by the use of an ultra-high degree spherical harmonic representation of global elevation model for deriving the reference Helmert field in conjunction with a derived global geopotential model. (3) The Canadian gravimetric geoid model is published for the first time with associated error estimates. In addition, CGG2010 includes the new marine gravity data, ArcGP gravity grids, and the new Canadian Digital Elevation Data (CDED) 1:50K. CGG2010 is compared to GPS-levelling data in Canada. The standard deviations are estimated to vary from 2 to 10 cm with the largest error in the mountainous areas of western Canada. We demonstrate its improvement over the previous models CGG2005 and EGM2008.     

Mapping of aggregated floodplain plant communities using image fusion of CASI and LiDAR data

Combined optical and laser altimeter data offer the potential to map and monitor plant communities based on their spectral and structural characteristics. A problem unresolved is, however, that narrowly defined plant communities, i.e. plant communities at a low hierarchical level of classification in the Braun-Blanquet system, often cannot be linked directly to remote sensing data for vegetation mapping. We studied whether and how a floristic dataset can be aggregated into a few major discrete, mappable classes without substantial loss of ecological meaning. Multi-source airborne data (CASI and LiDAR) and floristic field data were collected for a floodplain along the river Waal in the Netherlands. Mapping results based on floristic similarity alone did not achieve highest levels of accuracy. Ordination of floristic data showed that terrain elevation and soil moisture were the main underlying environmental drivers shaping the floodplain vegetation, but grouping of plant communities based on their position in the ordination space is not always obvious. Combined ordination-based grouping with floristic similarity clustering led to syntaxonomically relevant aggregated plant assemblages and yielded highest mapping accuracies.     

Exploring uncertainty in remotely sensed data with parallel coordinate plots

The existence of uncertainty in classified remotely sensed data necessitates the application of enhanced techniques for identifying and visualizing the various degrees of uncertainty. This paper, therefore, applies the multidimensional graphical data analysis technique of parallel coordinate plots (PCP) to visualize the uncertainty in Landsat Thematic Mapper (TM) data classified by the Maximum Likelihood Classifier (MLC) and Fuzzy C-Means (FCM). The Landsat TM data are from the Yellow River Delta, Shandong Province, China. Image classification with MLC and FCM provides the probability vector and fuzzy membership vector of each pixel. Based on these vectors, the Shannon's entropy (S.E.) of each pixel is calculated. PCPs are then produced for each classification output. The PCP axes denote the posterior probability vector and fuzzy membership vector and two additional axes represent S.E. and the associated degree of uncertainty. The PCPs highlight the distribution of probability values of different land cover types for each pixel, and also reflect the status of pixels with different degrees of uncertainty. Brushing functionality is then added to PCP visualization in order to highlight selected pixels of interest. This not only reduces the visualization uncertainty, but also provides invaluable information on the positional and spectral characteristics of targeted pixels.