Improved Resolution of Ambient Flow through Fractured Rock with Temperature Logs

In contaminant hydrogeology, investigations at fractured rock sites are typically undertaken to improve understanding of the fracture networks and associated groundwater flow that govern past and/or future contaminant transport. Conventional hydrogeologic, geophysical, and hydrophysical techniques used to develop a conceptual model are often implemented in open boreholes under conditions of cross-connected flow. A new approach using high-resolution temperature (±0.001°C) profiles measured within static water columns of boreholes sealed using continuous, water-inflated, flexible liners (FLUTe™) identifies hydraulically active fractures under ambient (natural) groundwater flow conditions. The value of this approach is assessed by comparisons of temperature profiles from holes (100 to 200 m deep) with and without liners at four contaminated sites with distinctly different hydrogeologic conditions. The results from the lined holes consistently show many more hydraulically active fractures than the open-hole profiles, in which the influence of vertical flow through the borehole between a few fractures masks important intermediary flow zones. Temperature measurements in temporarily sealed boreholes not only improve the sensitivity and accuracy of identifying hydraulically active fractures under ambient conditions but also offer new insights regarding previously unresolvable flow distributions in fractured rock systems, while leaving the borehole available for other forms of testing and monitoring device installation.     

Peculiarities of Dynamic Slip Nucleation in a Thin Granular Layer

Izvestiya, Physics of the Solid Earth - Abstract—Granular media determine the dynamics of many natural systems including faults in the Earth’s crust. The paper addresses the laboratory...     

Arsenic anomalies in shallow Venetian Plain (Northeast Italy) groundwater

A pilot area within the Venetian Plain was selected to assess the arsenic (As) contamination of groundwater. The area represents a typical residential, industrial and agricultural organization representative of most western countries, and is also devoid of lithologies with high or anomalous As content. Hydrogeological and chemical data have been collected, the latter spatialized by a geostatistical approach. The unconfined aquifer reservoir varies from a predominantly gravel composition in the north to a sandy and silt–clay composition further south, including peat layers. The hydrochemical features of the waters are rather homogeneous, featuring low mineral content and a Ca-bicarbonate signature. In contrast, the redox state is highly variable; oxidizing conditions are predominant in the northern and coarse parts of the aquifer, whereas reducing potentials prevail in the southern and silt–clay parts. Several well waters contain arsenic in excess of drinkable limits (=10 ppb), and most of these wells are located in the southern area. A large portion of the studied area has a high probability of containing non-potable water (up to 150 ppb As). Remarkably, As “hot spots” (As > 300 ppb, up to 431 ppb) were identified at the transition from gravel to silt–clay sediments. No industrial or agricultural source of As has been found.     

Manganese concentration in the silts of the Mozhaisk Reservoir

The causes of the high Mn concentration in the solid phase and pore solution of bottom sediments in the Mozhaisk Reservoir are discussed. Regularities are identified in variations the concentrations of Mn forms in reservoir deposits from its upper part to the dam.     

Expansion of the principal functions of Keplerian motion using complex variables

A special system of canonical variables is considered. An algorithm for expanding the principal functions of Keplerian motion in new elements is presented. The advantage of the proposed system is a relatively small number of terms in the classical expansions of the unperturbed two-body problem. A method for expanding the time derivatives of the rectangular coordinates is proposed. Some estimates of the number of terms in the presented expansions have been obtained through numerical experiments.     

Laboratory study of deep-water breaking waves

In an attempt to elucidate the mechanics of deep-water wave breaking, a variety of breaking waves, including spilling and plunging waves, of different length scales and geometries was studied. The waves were generated through wave-wave interactions using wave packets with constant-steepness components, constant-amplitude components, and also components following the Pierson-Moskowitz distribution. Wave steepening prior to breaking were found to cause an increase in the high frequency spectral slope of the wave spectrum. The slopes were correlated to the type of breaking and the intensity of the breaking. The energy loss through breaking varied with the spectral characteristics of the wave packet. On the other hand, it was also noted that, irrespective of the wave packet, the losses were from the higher frequency end of the first harmonics.     

Biosorption of Rare-Earth Elements and Yttrium by Heterotrophic Bacteria in an Aqueous Environment

This paper reports the results of the experimental determination of the coefficient of sorption of rare-earth elements and yttrium (REY) under conditions of acidic pH using several strains of heterotrophic bacteria (Microbacterium sp., Curtobacterium sp., Bacillus subtilis, Pseudomonas putida, and Bacillus pumilis) that are widespread in natural and technogenic waters of the Far East (Russia). Insignificant fractionation between heavy and light rare-earth elements, negative cerium and dysprosium anomalies, and a positive europium anomaly were revealed. The selectivity of REY biosorption by gram-positive and gram-negative bacteria, as well as inertia of the biosorption process under more acidic conditions of the medium, were shown.