Comment on the paper “CAWSES November 7–8, 2004, Superstorm: Complex Solar and Interplanetary Features in the Post-Solar Maximum Phase,” B. T. Tsurutani,E. Echer,F. L. Guarnieri,and J. U. Kozyra,Geophys. Res. Lett. 35 (2008)

The solar sources of the magnetic storms of November 8 and 10, 2004, are analyzed. The preliminary results of such an analysis [Yermolaev et al., 2005] are critically compared with the results of the paper [Tsurutani et al., 2008], where solar flares were put in correspondence with these magnetic storms. The method for determining solar sources that cause powerful magnetospheric storms is analyzed. It has been indicated that an optimal approach consists in considering coronal mass ejections (CMEs) as storm sources and accompanying flares as additional information about the location of CME origination.     

Scaling of response spectrum and duration for aftershocks

Aftershocks have the potential to cause collapse of a structure that has been already damaged by the preceding main shock. Seismic safety of a structure should therefore be ascertained through a damage analysis using the anticipated main shock and few larger-aftershock motions. Simulation of aftershock motions needs characterization of the seismic hazard due to aftershocks, and therefore it will be useful to develop a conditional scaling model that can predict the response spectrum of an anticipated aftershock motion consistent with the design spectrum of the main shock motion anticipated at the same station. In this study an attempt is made to develop a conditional scaling model for the pseudo spectral velocity spectrum via linear regression analysis on the aftershock and main shock recordings for the 1999 Chi–Chi earthquake. It is shown that it may be possible to obtain a simpler and approximate version of the conditional model from an unconditional model. Damage-causing potential of a ground motion also depends on its strong motion duration (SMD) and therefore a conditional scaling model is developed for SMD of the aftershock motion in several narrow frequency-bands. The model is developed for the larger-aftershock motions and it is shown that a reasonable replacement of such a model may be obtainable directly from an unconditional model. Finally, a simple weighted averaging scheme is proposed to obtain the composite SMD from the SMDs for different frequency bands by using the pseudo spectral acceleration spectrum of the motion.     

Geochemistry of Suspended Matter from Waters of the Amazon Basin

The geochemical study of the suspended matter in the waters of the Amazon River and its tributaries revealed that the chemical composition of this material ranges widely; however, generally, it is similar to the average composition of the suspended matter in the rivers and clayey sedimentary rocks around the world. Against this background, an essential regional Hg enrichment due to the anthropogenic factor is distinguished. The suspensions from the so-called clear waters from the tributaries of the Amazon River—Xingu and Trombetas—demonstrate the local enrichment in Pb, Sn, Zn, and organic carbon indicating the ore mineralization of the drainage basin, and points to the presence of metal-organic complexes.     

High-resolution ion-microprobe measurement of lead isotopes: Variations within single zircons from Lac Seul,northwestern Ontario

Selected-area measurements of lead-isotope ratios in zircons have been made at high mass resolution using a modified A.E.I. IM20 ion-microprobe. At a working resolution of 3200 it is shown that the important interfering molecular peaks generated from the zircon matrix may be separated from atomic lead peaks. Corrections for overlapping peaks, which are necessary in measurements of lead isotopes at low mass resolution, are then only required for ²⁰⁸Pb.Measurements on N.B.S. standards show no isotope discrimination within counting statistics. Determination of ²⁰⁷Pb/²⁰⁶Pb on 29 single zircon grains from a tonalite gneiss and a granite from Lac Seul, northwestern Ontario, give very variable ratios with mean values close to those of bulk separates. Peaks in the distribution of 207/206 ratios obtained from the tonalite gneiss may be interpreted as evidence for two stages of lead loss. High 207/206 ratios are shown to be significant for at least two zircons and probably record a minimum age of formation of 3.3 ± 0.1 b.y. for the gneiss.     

Geoeffective Disturbances in the Solar Wind near the Solar Activity Minimum according to the Data of a Two-year Series of Observations of Interplanetary Scintillations with the BSA LPI Radio Telescope

Astronomy Reports - A joint analysis of the monitoring data of interplanetary scintillations with solar and geophysical data showed that at the descending phase of the 24 solar activity cycle, the...     

Regional scale evapotranspiration estimation using satellite derived albedo and surface temperature

In the studies reteted to surface energy balance, satellite data provides important inputs for estimating regional surface albedo and evapotranspiration. The paper describes the use of satellite data in determining the surface emissivity over heterogeneous a’reas by taking Normalized Difference Vegetation Index (NDVI) as modulating parameter at pixel resolution. The estimated emissivity values have been used to find the surface temperature at the pixel scale. Landsat-TM-visible, NIR, TIR bands data and some ground meteorological data have been used in an energy balance model for estimating surface albedo and evapotranspiration. The ET values derived from the model are in good agreement with the values obtained with. ‘CENTURY MODEL’ and ground observations over the area, suggesting the possible use of this approach fot regional scale studies on evapotranspiration.     

Applying landscape-ecological concept and GIS modelling for assessing and mapping of ecological situation of mountainous landscapes (on the case of Syunik marz,Armenia)

Regional landscape-ecological studies have acquired a special topicality as they assure efficient environmental conservation and sustainable use of natural resources. A landscape-ecological analysis was performed based on four basic integral indices: (1) ecological potential, (2) ecological stability, (3) ecological load and (4) ecological tension. The values of basic integral indices of the landscape-ecological analysis were calculated as sums of respective factors expressed in scores and multiplied by their significance reflecting coefficients. In agreement with that rule, a formula was derived of calculation of basic indices of landscape-ecological analysis. Subsequently, those factors were integrated by ‘Model Builder’ in ArcGIS applying ‘Weighted Sum’ functions. Finally, through geographic information systems modelling, maps of basic indices of landscape-ecological analysis were produced. In conclusion – ecological potential, stability, load and tension are best indicators for the assessment of the landscape-ecological situation of the studied territory.     

Canadian gravimetric geoid model 2010

A new gravimetric geoid model, Canadian Gravimetric Geoid 2010 (CGG2010), has been developed to upgrade the previous geoid model CGG2005. CGG2010 represents the separation between the reference ellipsoid of GRS80 and the Earth’s equipotential surface of $W_0=62{,}636{,}855.69~\mathrm{m}^2\mathrm{s}^{-2}$ W 0 = 62 , 636 , 855.69 m 2 s ? 2 . The Stokes–Helmert method has been re-formulated for the determination of CGG2010 by a new Stokes kernel modification. It reduces the effect of the systematic error in the Canadian terrestrial gravity data on the geoid to the level below 2 cm from about 20 cm using other existing modification techniques, and renders a smooth spectral combination of the satellite and terrestrial gravity data. The long wavelength components of CGG2010 include the GOCE contribution contained in a combined GRACE and GOCE geopotential model: GOCO01S, which ranges from $-20.1$ ? 20.1 to 16.7 cm with an RMS of 2.9 cm. Improvement has been also achieved through the refinement of geoid modelling procedure and the use of new data. (1) The downward continuation effect has been accounted accurately ranging from $-22.1$ ? 22.1 to 16.5 cm with an RMS of 0.9 cm. (2) The geoid residual from the Stokes integral is reduced to 4 cm in RMS by the use of an ultra-high degree spherical harmonic representation of global elevation model for deriving the reference Helmert field in conjunction with a derived global geopotential model. (3) The Canadian gravimetric geoid model is published for the first time with associated error estimates. In addition, CGG2010 includes the new marine gravity data, ArcGP gravity grids, and the new Canadian Digital Elevation Data (CDED) 1:50K. CGG2010 is compared to GPS-levelling data in Canada. The standard deviations are estimated to vary from 2 to 10 cm with the largest error in the mountainous areas of western Canada. We demonstrate its improvement over the previous models CGG2005 and EGM2008.     

Mapping of aggregated floodplain plant communities using image fusion of CASI and LiDAR data

Combined optical and laser altimeter data offer the potential to map and monitor plant communities based on their spectral and structural characteristics. A problem unresolved is, however, that narrowly defined plant communities, i.e. plant communities at a low hierarchical level of classification in the Braun-Blanquet system, often cannot be linked directly to remote sensing data for vegetation mapping. We studied whether and how a floristic dataset can be aggregated into a few major discrete, mappable classes without substantial loss of ecological meaning. Multi-source airborne data (CASI and LiDAR) and floristic field data were collected for a floodplain along the river Waal in the Netherlands. Mapping results based on floristic similarity alone did not achieve highest levels of accuracy. Ordination of floristic data showed that terrain elevation and soil moisture were the main underlying environmental drivers shaping the floodplain vegetation, but grouping of plant communities based on their position in the ordination space is not always obvious. Combined ordination-based grouping with floristic similarity clustering led to syntaxonomically relevant aggregated plant assemblages and yielded highest mapping accuracies.