Relationships between Campi Flegrei and Mt. Somma volcanism: evidence from melt inclusions in clinopyroxene phenocrysts from volcanic breccia xenoliths

Summary We present compositions of reheated melt inclusions in clinopyroxene phenocrysts from three mafic xenoliths in Breccia Museo, Campi Flegrei, Italy. Melt inclusion compositions are remarkably different from the compositions of known contemporary Campi Flegrei lavas, being significantly enriched in K₂O and depleted in Na₂O. Some differences are also evident in FeO^* (total Fe as FeO) and TiO₂ contents. The clinopyroxene phenocrysts could not have crystallised from Campi Flegrei magmas. We suggest that they originated from a volcanic system genetically very similar to, and possibly linked with, the >14 ka volcanic system of Mt. Somma, another Campanian volcano ∼ 30 km east from Campi Flegrei, from which Vesuvius subsequently developed. This result indicates a close relationship (or link) between the two volcanic systems which have until now been considered separate. We speculate that the link was established prior to eruption of the Neapolitan Yellow Tuff (NYT) (∼ 12 ka). The xenoliths were derived from a volcanic system older than the host breccias themselves. We suggest that this older volcanism had close similarities with the volcanism of the older products of Mt. Somma (∼25 ka). Received March 20, 2000; accepted November 2, 2000     

Pre-collisional high pressure metamorphism and nappe tectonics at active continental margins: a numerical simulation

The evolution of a subduction channel and orogenic wedge is simulated in 2D for an active continental margin, with P-T paths being displayed for selected markers. In our simulation, subduction erosion affects the active margin and a structural pattern develops within a few tens of millions of years, with four zones from the trench into the forearc: (i) an accretionary complex of low grade metamorphic sedimentary material, (ii) a wedge of nappes with alternating upper and lower crustal provenance, and minor interleaving of oceanic or hydrated mantle material, (iii) a megascale melange composed of high pressure (HP) and ultra-high pressure (UHP) metamorphic rocks extruded from the subduction channel, and (iv) the upward tilted frontal part of the remaining lid. The P–T paths and time scales correspond to those typically recorded in orogenic belts. The simulation shows that HP/UHP metamorphism of continental crust does not necessarily indicate collision, but that the material can be derived from the active margin by subduction erosion and extruded from the subduction channel beneath the forearc during ongoing subduction.     

Inverted echo sounder measurement of dynamic height through an ENSOcycle in the central equatorial Pacific

A four-year record from an inverted echo sounder deployed near Palmyra Island at 6°N in the central Pacific Ocean is compared with a simultaneous record of subsurface pressure from this island lagoon. A factor m, converting round-trip acoustic travel time to surface dynamic height relative to a deep pressure level, was estimated from the ratio of the spectra of the two records in the energetic synoptic oscillation band. Year-to-year variation in m was not statistically significant. For the overall record, m was found to be -70±8 dynamic m/s, where the error bounds represent a 90% confidence interval. This is consistent with first-baroclinic-mode excitation     

Evolution of 2:1 layered silicates in low-grade metamorphosed Liassic shales of Central Switzerland

White mica from the Liassic black shales and slates in Central Switzerland was analysed by transmission electron microscopy (TEM) and electron microprobe to determine its textural and compositional evolution during very low-grade prograde metamorphism. Samples were studied from the diagenetic zone, anchizone and epizone (T ≈100°–450 °C). Phyllosilicate minerals analysed include illite/smectite (I/S), phengite, muscovite, brammallite, paragonite, margarite and glauconite. Textural evolution primarily is towards larger, more defect-free grains with compositions that approach those of their respective end-members. The smectite-to-illite transformation reduced the amounts of the exchange components SiK_?1Al_?1, MgSiAl_?2, and Fe³⁺Al_?1. These trends continue to a lesser degree in the anchizone and epizone. Correlations between the proportion of smectite in I/S and the composition of I/S indicate that smectite layers may contain a high layer charge. Illite in I/S bears a compositional resemblance to macrocrystalline phengite in some samples, but is different in others. Paragonite first appears in the upper diagenetic zone or lower anchizone as an interlayer-deficient brammallite, and it may be mixed with muscovite on the nanometre scale. Owing to the small calculated structure factor for paragonite-muscovite superstructures, conventional X-ray powder diffraction cannot distinguish between mixed-layer structures and a homogeneous compositionally intermediate solid solutions. However, indirect TEM evidence shows that irregularly shaped domains of Na- and K-rich mica exist below 10 nm. Subsequent coarsening of domains at higher grades produced discrete paragonite grains at the margins of muscovite crystals or in laths parallel to the basal plane of the host muscovite. Margarite appears in the epizone and follows a textural evolution similar to paragonite in that mixtures of margarite, paragonite, and muscovite may initially occur on the nanometre scale. However, no evidence of interlayer-poor margarite has been found.     

Slumping and shallow faulting related to the presence of salt on the Continental Slope and Rise off North Carolina

Seismic reflection profiles and long- and medium-range sidescan sonar were used to investigate a salt diapir complex and area of slope instability near the base of the Continental Slope off North Carolina. Within the area of investigation three diapirs are bounded on their upslope side by a scarp 60 m high and 50 km long. The slope above the scarp is characterized by a series of shallow rotational normal faults. The bottom below the scarp is furrowed by slide tracks, which were probably carved by large blocks that broke off the scarp face and slid downslope leaving rubble and scree lobes.Extensive slumping in this area appears to be a result of uplift and faulting associated with salt intrusion, which has fractured and oversteepened the slope leading to instability and failure. Sharply defined slide tracks suggest that slope failure above the breached diapir complex is a continuing process, in contrast to much of the surrounding slope area where few instability features were observed.     

Volcanic style in the Strand Fiord Formation (Upper Cretaceous), Axel Heiberg Island, Canadian Arctic Archipelago

The Strand Fiord Formation is a volcanic unit of early Late Cretaceous age which outcrops on west-central and northwestern Axel Heiberg Island in the Canadian Arctic Archipelago. The formation is part of the thick Sverdrup Basin succession and immediately precedes the final basin foundering event. The Strand Fiord volcanics are encased in marine strata and thin southward from a maximum thickness of 789+ m on northwestern Axel Heiberg to a zero edge near the southern shore of the island. Tholeiitic icelandite flows are the main constituent of the formation with volcaniclastic conglomerates, sandstones, mudrocks and rare coal seams also being present. The lava flows range in thickness from 6 to 60 m and subaerial flows predominate. Both pahoehoe and aa lava types are common and the volcanic pile accumulated mostly by the quiet effusion of lavas. The volcaniclastic lithologies become more common near the southern and eastern edges of the formation and represent lahars and beach to shallow marine reworked deposits. The Strand Fiord volcanics are interpreted to represent the cratonward extension of the Alpha Ridge, a volcanic ridge that was active during the formation of the Amerasian Basin.     

On the structure of the Ivrea-Verbano Zone (northern Italy) and its implications for present-day lower continental crust geometry

The Ivrea-Verbano Zone in northern Italy represents a section through the lower continental crust which has been tilted and emplaced into its present position during the Alpine orogeny. Recent and on-going structurally-oriented geological mapping in this region is providing new information about the geometry of the complex. The central part of the zone is dominated by a large basic complex (the 'mafic formation') which is intrusive into the surrounding gneisses. The foliation within the envelope of gneisses is deflected around the intrusive complex as if by ballooning, but in the region south-west of Monte Capio both units are folded together into a tight to isoclinal steeply plunging fold with an amplitude of c. 10 km. This fold locally inverts the stratigraphy of the layered basic group of the complex, and is thought to be the result of gravitational collapse following intrusion and inflation of a large magma body into the lower crust.
Several high-temperature shear zones have now been traced within the country rock for distances up to 20 km. The geometry of these, and their relationship to the basic complex suggests that at least some of the extensional collapse of the mafic body is related to uplift caused by intrusion of this body.
Close parallels can be drawn between the observed structure in the Ivrea-Verbano Zone (after removing the effects of late, low-temperature faulting and folding related to emplacement of the rocks into their present position), and those inferred from deep seismic reflection profiling in areas of current extension such as parts of the US Basin and Range province.     

Fracture energy release and size effect in borehole breakout

The paper presents a simple approximate analytical solution of the remote stresses that cause the collapse of a borehole or other circular cylindrical cavity in an infinite elastic space. Regions of parallel equidistant splitting cracks are assumed to form on the sides of the cavity. Their boundary is assumed to be an ellipse of a growing horizontal axis, the other axis remaining equal to the borehole diameter. The slabs of rock between the splitting cracks are assumed to buckle as slender columns, and their post-critical stress is considered as the residual stress in the cracked rock. The buckling of these slab columns is assumed to be resisted not only by their elastic bending stiffness but also shear stresses produced on rough crack faces by relative shear displacements. The energy release from the infinite medium caused by the growth of the elliptical cracking region is evaluated according to Eschelby's theorem. This release is set equal to the energy dissipated by the formation of all the splitting cracks, which is calculated under the assumption of constant fracture energy. This yields the collapse stress as a function of the elastic moduli, fracture energy, ratio of the remote principal stresses, crack shear resistance characteristic and borehole diameter. The collapse stress as a function of crack spacing is found to have a minimum, and the correct crack spacing is determined from this minimum. For small enough diameters, the crack spacing increases as the (4/5)-power of the borehole diameter, while for large enough diameters a constant spacing is approached. In contrast to plastic solutions, the breakout stress exhibits a size effect, such that for small enough diameters the breakout stress decreases as the (? 2/5)-power of the borehole diameter, while for large enough diameters a constant limiting value is approached. Finally, some numerical estimates are given and the validity of various simplifying assumptions made is discussed.