A model of fish preference and mortality under hypoxic water in the coastal environment

Eutrophication and associated occurrence of hypoxic condition could cause significant damage to marine ecosystems, resulting in considerable economic losses to fisheries and aquaculture and is a major source of stress that fish often have to contend with in order to survive. This problem is likely to be exacerbated in the coming years, since the wastewater treatment facilities is unlikely to catch up with increasing human activities. Moreover, large-scale reclamation projects in coastal areas have recently been increased, and these activities certainly have adverse impacts on water quality and fisheries resources. Coastal construction has a significant role in the development of hypoxic water by changing the current and mixing pattern of water. Changes in species composition and decreases in species richness and diversity have been well documented in hypoxic systems. Hypoxia could cause endocrine disruption in fish and eliminate populations of sensitive species. Shallow coastal areas are of great importance for the special nursery of fish and shellfish and land reclamation in these areas cause strong damage to fisheries. Although the tolerance of aquatic life to hypoxia is known, there is no information about the mortality of fish caused by hypoxia because fish can swim around it and no modeling study has yet been carried out. Criteria that influence the movement of fish are: amounts of food, water temperature and depth, dissolved oxygen concentration and nature of seabed. However, among these, water temperature and dissolved oxygen are the most crucial parameters that affect survival, movement and growth of fish. In this paper, a model of fish preference and mortality for environmental conditions was developed and applied to the Hakata Bay where hypoxic water occurs every summer. For the purpose of this study, a field survey of fish behavior under hypoxic water was conducted by releasing marbled sale (Pleuronectes yokohamae) in the inner bay. Moreover, a series of preference tests for DO, salinity and temperature in the laboratory were conducted in order to decide preference parameters of fish. Using the results of both field and laboratory studies, a sub-module of fish preference and mortality was coded within an integrated hydrothermal and eutrophication model (CHEM) to predict the behavior and mortality of marbled sale when hypoxia would occur in the bay. The model could reasonably simulate the behavior of the fish under hypoxia. An assessment of the impact of the ongoing land reclamation project of about 401 ha in the Wajiro tidal flat zones at the head of the bay on the fisheries resources was also conducted using the model. The results showed that the artificial land lowered the mortality rate of fish under hypoxic condition in the bay during the summer period.     

New variable stars from the photographic archive: semi-automated discoveries,attempts at automatic classification and the new field 104 Her

Using 172 plates taken with the 40-cm astrograph of the Sternberg Astronomical Institute(Lomonosov Moscow University) in 1976–1994 and digitized with a resolution of 2400 dpi, we discovered and studied 275 new variable stars. We present the list of our new variables with all necessary information concerning their brightness variations. As in our earlier studies, the new discoveries show a rather large number of high-amplitude Delta Scuti variables, predicting that many stars of this type remain not detected in the whole sky. We also performed automated classification of the newly discovered variable stars based on the Random Forest algorithm. The results of the automated classification were compared to traditional classification and showed that automated classification was possible even with noisy photographic data. However, further improvement of automated techniques is needed, which is especially important when considering the very large numbers of new discoveries expected from all-sky surveys.     

A literature synthesis of LiDAR applications in transportation: feature extraction and geometric assessments of highways

Interest in using Light Detection and Ranging (LiDAR) technology in Transportation Engineering has grown over the past decade. The high accuracy of LiDAR datasets and the efficiency by which they can be collected has led many transportation agencies to consider mobile LiDAR as an alternative to conventional tools when surveying roadway infrastructure. Nonetheless, extracting semantic information from LiDAR datasets can be extremely challenging. Although extracting roadway features from LiDAR has been considered in previous research, the extraction of some features has received more attention than others. In fact, for some roadway design elements, attempts to extract those elements from LiDAR have been extremely scarce. To document the research that has been done in this area, this paper conducts a thorough review of existing studies while also highlighting areas where more research is required. Unlike previous research, this paper includes a thorough review of the previous attempts at data extraction from LiDAR while summarizing the detailed steps of the extraction procedure proposed in each study. Moreover, the paper also identifies common tools and techniques used to extract information from LiDAR for transportation applications. The paper also highlights common limitations in existing algorithms that could be improved in future research. This paper represents a valuable resource for researchers and practitioners interested in knowing the current state of research on the applications of LiDAR in the field of Transportation Engineering while also understanding the opportunities and challenges that lie ahead.     

Le Viséen supérieur d'Azarhare (Maroc central) : environnements de dépôt,datation et évolution diagénétique

The unexplored area of Azarhare in central Morocco is studied thanks to three sections composed of five lithological facies Main biostratigraphical and sedimentological results concern (1) the identification of Late Visean biozones, with important presence of problematic algae Ungdarella, (2) the regional extension of deposit sequences SD5, SD6 and SD7 previously defined, (3) and an analysis of the diagenetic kaolinite. To cite this article: A. Karim et al., C. R. Geoscience 337 (2005).     

Biostratigraphy of oligocene succession in the High Folded Zone,Sulaimani, Kurdistan region,Northeastern Iraq

Oligocene and Lower Miocene sediments from High Folded Zone of Iraqi Zagros have been studied paleontologically at south of Sulaimaniyah, Kurdistan Region, NE Iraq. The identified fauna are consisted of (25) genera and species of benthonic and (16) species of planktonic foraminifera. The fauna comprises relatively abundant foraminiferal assemblages of moderate diversity. Based on the stratigraphic distribution of these species, two biozones have been recognized which are Nummulites—Rotalia and Globoquadrina dehiscens zones. These biozones indicate that the studied sections of Basara and Khewata are of Late Oligocene–Early Miocene age. Based on the microfossils, it has been found that the age of sediments is equivalent to or represents Anah and Serikagni Formations. Some previous studies described Oligocene rocks (Kirkuk Group) as interior sag basin. In the present study, the occurrence of the group inside High Folded Zone and its rich fauna content are used for the discussion of the sag basin versus normal marine water.     

A practical co-simulation approach for multiscale analysis of geotechnical systems

The particulate nature of granular soils can be accurately simulated at a microscale level. However, due to the huge spatial extent of geotechnical systems, a model fully constructed at such a scale is almost impossible with current computing technologies. Hence, continuum-based approaches are considered as the practical scale for modeling the majority of problems. Combining both scales enables benefiting from the advantages of both techniques while trying to overcome their drawbacks. Although a significant number of publications have addressed coupling both scales, only a few provide information regarding implementing the proposed procedures. In this study, an efficient co-simulation framework for conducting multiscale analysis is introduced. The framework is based on integrating existing continuum and micromechanical modeling software packages and therefore benefitting from already existing codes. A computational simulation of a rigid pile in contact with granular soil demonstrating the capabilities of such technique is presented. The near-field zone surrounding the pile is modeled using DEM whereas FEM is utilized to model far-field zones that are not affected by the presence of the pile. Results of conducted simulations resemble those obtained from experimental results. The proposed approach appears to be a very effective and promising tool to model boundary value problems of geotechnical systems.     

SWAT-based hydrological modelling of tropical land-use scenarios

Abstract

The Hulu Langat basin, a strategic watershed in Malaysia, has in recent decades been exposed to extensive changes in land-use and consequently hydrological conditions. In this work, the impact of Land Use and Cover Change (LUCC) on hydrological conditions (water discharge and sediment load) of the basin were investigated using the Soil and Water Assessment Tool (SWAT). Four land-use scenarios were defined for land-use change impact analysis, i.e. past, present (baseline), future and water conservation planning. The land-use maps, dated 1984, 1990, 1997 and 2002, were defined as the past scenarios for LUCC impact analysis. The present scenario was defined based on the 2006 land-use map. The 2020 land-use map was simulated using a cellular automata-Markov model and defined as the future scenario. Water conservation scenarios were produced based on guidelines published by Malaysia’s Department of Town and Country Planning and Department of Environment. Model calibration and uncertainty analysis was performed using the Sequential Uncertainty Fitting (SUFI-2) algorithm. The model robustness for water discharge simulation for the period 1997–2008 was good. However, due to uncertainties, mainly resulting from intense urban development in the basin, its robustness for sediment load simulation was only acceptable for the calibration period 1997–2004. The optimized model was run using different land-use maps over the periods 1997–2008 and 1997–2004 for water discharge and sediment load estimation, respectively. In comparison to the baseline scenario, SWAT simulation using the past and conservative scenarios showed significant reduction in monthly direct runoff and monthly sediment load, while SWAT simulation based on the future scenario showed significant increase in monthly direct runoff, monthly sediment load and groundwater recharge.

Editor D. Koutsoyiannis; Associate editor C. Perrin     

Integrated geoelectrical survey for groundwater and shallow subsurface evaluation: case study at Siliyin spring, El-Fayoum, Egypt

Siliyin spring is one of the many natural fresh water springs in the Western Desert of Egypt. It is located at the central part of El-Fayoum Delta, which is a potential place for urban developments and touristic activities. Integrated geoelectrical survey was conducted to facilitate mapping the groundwater resources and the shallow subsurface structures in the area. Twenty-eight transient electromagnetic (TEM) soundings, three vertical electrical soundings (VES) and three electrical resistivity tomography (ERT) profiles were carried out around the Siliyin spring location. The dense cultivation, the rugged topography and the existence of infra structure in the area hindered acquiring more data. The TEM data were inverted jointly with the VES and ERT, and constrained by available geological information. Based on the inversion results, a set of geoelectrical cross-sections have been constructed. The shallow sand to sandy clay layer that forms the shallow aquifer has been completely mapped underneath and around the spring area. Flowing of water from the Siliyin spring is interconnected with the lateral lithological changes from clay to sand soil. Exploration of the extension of Siliyin spring zone is recommended. The interpretation emphasizes the importance of integrating the geoelectrical survey with the available geological information to obtain useful, cheap and fast lithological and structural subsurface information.     

Paleostress reconstructions of Jabal Hafit structures,Southeast of Al Ain City,United Arab Emirates (UAE)

This paper presents the first paleostress results obtained from displacement and fracture systems within the Lower Eocene sediments at Jabal Hafit, Abu Dhabi Emirate, UAE. Detailed investigation of Paleogene structures at Jabal Hafit reveal the existence of both extensional structures (normal faults) and compressional structures (strike-slip and reverse faults). Structural analysis and paleostress reconstructions show that the Paleogene kinematic history is characterized by the succession of four paleostress stages. Orientation of principal stresses was found from fault-slip data using an improved right-dihedra method, followed by rotational optimisation (TENSOR program).The paleostress results confirm four transtensional tectonic stages (T1–T4) which affected the study area. The first tectonic stage (T1) is characterized by S_Hmax NW–SE σ₂-orientation. This stage produced NW–SE striking joints (tension veins) and E–W to ENE–WSW striking dextral strike-slip faults. The proposed age of this stage is Early Eocene. The second stage (T2) had S_Hmax N–S σ₂-orientation. N–S striking joints and NNE–SSW striking sinistral strike-slip faults, E–W striking reverse faults and N–S striking normal faults were created during this stage. The T2 stage is interpreted to be post-Early Eocene in age. The third stage (T3) is characterized by S_Hmax E–W σ₂-orientation. This stage reactivated the E–W reverse faults as sinistral strike-slip faults and created E–W striking joints and NE–SW reverse faults. The proposed age for T3 is post-Middle Eocene. During the T3 (S_Hmax E–W σ₂-orientation) stage the NNW-plunging Hafit anticline was formed. The last tectonic stage that affected the study area (T4) is characterized by S_Hmax NE–SW σ₂-orientation. During this stage, the ENE–WSW faults were reactivated as sinistral strike-slip and reverse faults. NE–SW oriented joints were also created during the T4 (S_Hmax NE–SW σ₂-orientation) stage. The interpreted age of this stage is post-Middle Miocene time but younger than T3 (S_Hmax E–W σ₂-orientation) stage.