Fragility curves for masonry structures submitted to permanent ground displacements and earthquakes

Usually, the vulnerability of structures is treated considering only one single hazard, for example either seismic hazard or ground instability. However, historical monuments, cultural heritage structures or old masonry structures can be affected, over the past centuries of existence, by a succession of different hazards. The objective of this paper was to quantify the changes in the seismic vulnerability of a given structure previously damaged by quasi-static differential settlements. In view of this, a soil-structure model of the masonry building is constructed using TREMURI software by putting springs at the base of the building to account for the soil behaviour. Classical empirical relationships are used for setting the mechanical properties of these foundation springs. The chosen equations are valid for both static and dynamic situations. The soil-structure model is first submitted to differential settlements with maximum magnitudes ranging from 5 to 25 cm. Then, the damaged structures are submitted to a set of time-histories. Fragility curves taking into consideration permanent differential settlements are finally obtained, using a modified regression technique accounting for the presence of residual drift due to the prior static loading.     

Cu- and Mn-bearing tourmalines from Brazil and Mozambique: crystal structures, chemistry and correlations

Cu- and Mn-bearing tourmalines from Brazil and Mozambique were characterised chemically (EMPA and LA-ICP-MS) and by X-ray single-crystal structure refinement. All these samples are rich in Al, Li and F (fluor-elbaite) and contain significant amounts of CuO (up to ~1.8 wt%) and MnO (up to ~3.5 wt%). Structurally investigated samples show a pronounced positive correlation between the <Y-O> distances and the (Li + Mn²⁺ + Cu + Fe²⁺) content (apfu) at this site with R ² = 0.90. An excellent negative correlation exists between the <Y-O> distances and the Al₂O₃ content (R ² = 0.94). The samples at each locality generally show a strong negative correlation between the X-site vacancies and the (MnO + FeO) content. The Mn content in these tourmalines depends on the availability of Mn, on the formation temperature, as well as on stereochemical constraints. Because of a very weak correlation between MnO and CuO we believe that the Cu content in tourmaline is essentially dependent on the availability of Cu and on stereochemical constraints.     

Anisotropic mechanical properties of zircon and the effect of radiation damage

This study provides new insights into the relationship between radiation-dose-dependent structural damage due to natural U and Th impurities and the anisotropic mechanical properties (Poisson’s ratio, elastic modulus and hardness) of zircon. Natural zircon samples from Sri Lanka (see Muarakami et al. in Am Mineral 76:1510–1532, 1991) and synthetic samples, covering a dose range of zero up to 6.8 × 10¹⁸ α-decays/g, have been studied by nanoindentation. Measurements along the [100] crystallographic direction and calculations, based on elastic stiffness constants determined by Özkan (J Appl Phys 47:4772–4779, 1976), revealed a general radiation-induced decrease in stiffness (~54 %) and hardness (~48 %) and an increase in the Poisson’s ratio (~54 %) with increasing dose. Additional indentations on selected samples along the [001] allowed one to follow the amorphization process to the point that the mechanical properties are isotropic. This work shows that the radiation-dose-dependent changes of the mechanical properties of zircon can be directly correlated with the amorphous fraction as determined by previous investigations with local and global probes (Ríos et al. in J Phys Condens Matter 12:2401–2412, 2000a; Farnan and Salje in J Appl Phys 89:2084–2090, 2001; Zhang and Salje in J Phys Condens Matter 13:3057–3071, 2001). The excellent agreement, revealed by the different methods, indicates a large influence of structural and even local phenomena on the macroscopic mechanical properties. Therefore, this study indicates the importance of acquiring better knowledge about the mechanical long-term stability of radiation-damaged materials.     

Energy flow and elemental concentrations in the Steina River ecosystem (Black Forest, Germany)

Considering food web energetics and elemental cycling together allows the testing of hypotheses about the coevolution of biological systems and their physical environment. We investigated the energy flow and the distribution of 25 elements in the Steina River.¶We constructed an annual energy flow network and estimated the emergy ("embodied energy" that includes all the energy involved in a process) contributions of resources sustaining the system. Furthermore, we measured the concentration of various macronutrients, essential elements, and heavy metals in the physical environment and trophic compartments. Finally, we examined the hypothesis of a positive relationship between the "rarity" of an element and its tendency to bioaccumulate. To do so, we used transformity, the relative energy input required to sustain a compartment's net production or the concentration differential of an element between the living community and the physical environment.¶The resulting energy flow network is one of the most complete available for streams. In the Steina, over 99% of the energy input is transported through the system without being processed. Dissolved inorganic matter and sunlight are the largest inputs, but uptake efficiency is much higher for dissolved and particulate organic matter. Transformities of trophic compartments and elements span 6 to 7 orders of magnitude.¶The tendency to bioaccumulate was as predicted for most elements, with macronutrients showing no accumulation and heavy elements accumulating in high-transformity compartments. However, Na and K were found at highest concentrations in consumers, and Pb, Ga, and Cd in algae. Improved estimates may become possible as more knowledge is available on ecosystem flows. We suggest further ways of testing hypotheses about strategies of element processing.     

Elimination of source-generated noise from correlated vibroseis data (the ‘ghost-sweep’ problem)

The most common noise-reduction methods employed in the vibroseis technique (e.g. spike and burst reduction, vertical stacking) are applied in the field to reduce noise at a very early stage. In addition, vibrator phase control systems prevent signal distortions produced by non-linearity of the source itself. However, the success of these automatic correction methods depends on parameter justification by the operator and the actual characteristics of the distorting noise. More specific noise-reduction methods (e.g. Combisweep (Trade mark of Geco-Prakla), elimination of harmonics) increase production costs or need uncorrelated data for the correction process. Because the field data are usually correlated and vertically stacked in the field to minimize logistical and processing costs, it is not possible to make subsequent parameter corrections to optimize the noise reduction after correlation and vertical stacking of a production record. The noise-reduction method described here uses the final recorded, correlated and stacked vibroseis field data. This method eliminates signal artifacts caused e.g. by incorrect vibroseis source signals being used in parameter estimation when a frequency–time analysis is combined with a standard convolution process. Depending on the nature of the distortions, a synthetically generated, nearly recursive noise-separation operator compresses the noise artifact in time using a trace-by-trace filter. After elimination of this compressed noise, re-application of the separation operator leads to a noise-corrected replacement of the input data. The method is applied to a synthetic data set and to a real vibroseis field record from deep seismic sounding, with good results.     

Über die Vertikalverteilung und jahreszeitliche Entwicklung der Larvendichte vonDreissena polymorpha Pallas im Pelagial des unteren Zürichseebeckens im Jahre 1974

The freshwater musselDreissena polymorpha Pallas was sighted for the first time in Lake Zürich about 1969. This meant a real problem for the water treatment of lake water. By means of a pump and vertical net hauls it was tried to add more information to the scarce results on Lake Zürich. Additional dates about temperature, depth of Secchi disk visibility and beam transmittance were collected. There was a first appearance of the larvae ofD. polymorpha at the beginning of June. Following the mean temperature of the epilimnion the number of individuals/m² reached max. 210,000. The greatest concentration measured in 1974 of larvae/m³ was 54,375 at a depth of 4 m. The last appearance ofD. polymorpha was observed at the end of October.

     

Satellite estimates and subpixel variability of rainfall in a semi-arid grassland

卫星估雨精度的不确定性受到当地降雨类型和像元内降雨非均匀性影响,而结合这两个关键因素开展半干旱草原卫星估雨的研究有限.2009年夏,我们在中国锡林郭勒半干旱草原用多部微雨雷达和雨量计构建了9 km卫星像元降雨观测网,观测了像元内降雨非均匀性(空间变异系数CV),并评估了卫星估雨精度.结果表明:(1)CV值受像元内平均降雨量,降雨类型,降雨云面积及移向等影响,如高Cv值的降雨过程大多为平均降雨量小,对流性降雨过程,降雨云边缘像元CV值较高;(2)TRMM 3B42V7卫星估雨产品适用性较好,CMORPH和PERSIANN次之,但TRMM 3B42V7易在半干旱草原湖泊处高估降雨.