广西丹池盆地晚古生代震积岩及其构造意义

广西丹池盆地（即南丹—河池盆地）为晚古生代与金沙江—红河—马江古特提斯洋共生的大陆边缘裂谷盆地,盆地从早泥盆世晚期开始裂陷,与相邻地区形成条块分割的深水裂陷槽（条）和孤立台地（块）间列的局面。该盆地于三叠纪随着金沙江—红河—马江古特提斯洋的闭合而逐渐萎缩,消亡。在丹池裂陷盆地形成、演化过程中,形成一系列典型的震积岩及与地震相关的滑塌构造。地震形成的沉积构造包括沉积岩墙、地裂缝、沉积岩脉、微褶皱、负荷构造、火焰构造、滑塌构造（滑塌不整合、滑塌褶皱、角砾岩化）等。丹池盆地的震积岩反映晚古生代处于强烈的伸展活动期,震积岩及其伴生的滑塌构造序列反映盆地的幕式构造活动。     

面积平衡法与川东大池干推覆带区域滑脱面预测

本文详细介绍了面积平衡法的原理与方法,并将该方法应用于川东大池干构造的解释。利用面积平衡法,本文预测出在该地区可能有三个较大的区域滑脱面,它们分别位于3.53km处的中三叠统(由石膏、盐岩和泥页岩组成),7.79km处的下寒武统(由页岩、石膏和岩盐层组成),以及8.67km处的下寒武统(由页岩、石膏和岩盐层组成)地层之中。根据以上滑脱面的分析结果,作者认为大池干构造可以解释为滑脱褶皱和断层转折褶皱两种成因模式。在滑脱褶皱模式中,主滑脱面为8.67km处的非能干层;在断层转折褶皱模式中,该地区被认为具有上下两个滑脱面,其上滑脱面为3.53km处的非能干层,而其下滑脱面为7.79km处的非能干层。两种模式所对应的面积深度直线都具有较好的相关性,表明两种构造解释都具有内部岩层一致性,剖面达到平衡,故具有相对的合理性。     

Release of heavy metals during weathering of the Lower Cambrian Black Shales in western Hunan,China

Weathering of heavy metal enriched black shales may be one of the most important sources of environmental contamination in areas where black shales are distributed. Heavy metal release during weathering of the Lower Cambrian Black Shales (LCBS) in western Hunan, China, was investigated using traditional geochemical methods and the ICP-MS analytical technique. Concentrations of 16 heavy metals, 8 trace elements and P were measured for samples from selected weathering profiles at the Taiping vanadium ore mine (TP), the Matian phosphorous ore mine (MT), and Taojiang stone-coal mine (TJ). The results show that the bedrock at these three profiles is enriched with Sc, V, Cr, Co, Ni, Cu, Zn, Pb, Th, U, Mo, Cd, Sb, Tl, and P. Based on mass-balance calculation, the percentages of heavy metals released (in % loss) relative to immobile element Nb were estimated. The results show significant rates of release during weathering of: V, Cr, Co, Ni, Cu, Zn, U, Mo, Cd, Sn, Sb, and Tl for the TP profile; Sc, Cr, Mn, Co, Ni, Cu, Zn, Pb, Th, Cd, and Sn for the MT profile; and Sc, Mn, Co, Ni, Zn, Th, Cd, Sn, and Tl for the TJ profile. Among these heavy metals, Co, Ni, Zn, Cd, and Sn show very similar features of release from each of the three weathering profiles. The heavy metals released during weathering may affect the environment (especially topsoil and surface waters) and are possibly related to an observed high incidence of endemic diseases in the area.     

识别所钻地层的人工神经网络法应用

对用人工神经网络方法来解决钻探生产的实际问题, 在不取心的情况下识别所钻地层的岩性进行了研究.根据钻探生产的特点, 设计了人工神经网络的结构和输出方式, 开发了人工神经网络识别所钻地层的软件, 分析了影响人工神经网络应用效果的各因素, 在人工神经网络的优化设计方面作了较深入的研究.研究表明: 人工神经网络用于识别所钻地层有很好的效果; 人工神经网络的参数, 如学习率、隐含层层数、隐含层单元数和数据处理方式等对人工神经网络的应用效果有影响.      

地质环境信息系统上线安全检测工作实践

本文针对地质环境领域业务系统的特点,提出了一种信息系统上线安全检测的方法,深入探讨了上线安全检测实践中的基本流程、测评方法与测评成果,为提升地质环境信息系统安全运行和服务能力提供了技术支撑.     

太行山南端浅层速度结构成像和隐伏断裂探测

利用太行山南端的深地震反射剖面数据,运用初至波层析成像方法反演得到该区域的浅层P波速度结构和基底面展布形态,发现剖面浅部的P波速度变化与沉积盖层厚度和断裂分布有着较好的对应关系。利用跨断裂完成的浅层地震反射剖面,对区域内2条第四纪隐伏活动断裂进行高分辨率成像。结果表明,汤西断裂为东倾的正断层,控制汤阴地堑的西边界,活动年代为中更新世;汤东断裂为西倾的正断层,是汤阴地堑的主控边界断裂,活动年代为晚更新世。     

1979～2020年北极和青藏高原臭氧低值区的动力输送特征比较

基于ERA5月平均再分析资料,利用Lorenz环流分解方法从定常和瞬变以及基流和涡旋的角度对比了北极与青藏高原臭氧低值区的动力输送特征。结果表明：动力总输送在两地上平流层作用最强,均使其臭氧浓度降低,且定常输送均强于瞬变输送,纬向与经向输送的作用均大致相反。然而,动力输送在北极地区的作用强度远大于青藏高原地区。北极地区纬向输送使得平流层中上层臭氧浓度降低,平流层下层臭氧浓度升高,经向输送的作用与之相反且强度明显偏弱,二者均主要作用于上平流层。青藏高原地区纬向和经向输送除在上平流层均使得臭氧浓度降低外,二者作用大致相反且强度相当,输送大值区在垂直方向上存在双中心结构,分别位于上平流层与上对流层—下平流层（Upper Troposphere–Lower Stratosphere,简称UTLS）区。两地区纬向和经向输送的差异均主要由定常涡旋输送所造成。青藏高原地区定常与瞬变输送的强度差异没有北极地区大。此外,两地定常和瞬变输送中涡旋对臭氧纬向平均的输送均起到主要作用,体现出涡旋输送在两地臭氧浓度变化的动力输送过程中发挥着至关重要的作用。     

An improved earthquake catalogue (<Emphasis Type="Italic">M</Emphasis> ≥ 4.0) for Turkey and its near vicinity (1900–2012)

Many catalogues, agency reports and research articles have been published on seismicity of Turkey and its surrounding since 1950s. Given existing magnitude heterogeneity, erroneous information on epicentral location, event date and time, this past published data however is far from fulfilling the required standards. Paucity of a standardized format in the available catalogues have reinforced the need for a refined and updated catalogue for earthquake related hazard and risk studies. During this study, ~37,000 earthquakes and related parametric data were evaluated by utilizing more than 41 published studies and, an integrated database was prepared in order to analyse all parameters acquired from the catalogues and references for each event. Within the scope of this study, the epicentral locations of M ≥ 5.0 events were firstly reappraised based on the updated Active Fault Map of Turkey. An improved catalogue of 12.674 events for the period 1900–2012 was as a result recompiled for the region between 32–45N° and 23–48E° by analyzing in detail accuracy of all seismological parameters available for each event. The events consist of M ≥ 4.0 are reported in several magnitude scales (e.g. moment magnitude, M_w; surface wave magnitude, M_S; body-wave magnitude m_b; local magnitude M_L and duration magnitude M_d) whereas the maximum focal depth reaches up to 225-km. In order to provide homogenous data, the improved catalogue is unified in terms of M_w. Fore-and aftershocks were also removed from the catalogue and completeness analyses were performed both separately for various tectonic sources and as a whole for the study region of interest. Thus, the prepared homogenous and declustered catalogue consisting of 6573 events provides the basis for a reliable input to the seismic hazard assessment studies for Turkey and its surrounding areas.     

基于WheatSM模型参数优化的鹤壁地区冬小麦生长发育模拟研究

采用EFAST方法和SCE-UA算法优化WheatSM模型参数,采用区域模拟和单站插值的方法对2013—2017年鹤壁市冬小麦各发育期日数和产量进行模拟修订,为WheatSM作物模型在豫北地区的业务应用提供参考。研究发现:区域模拟方法对鹤壁地区冬小麦生育期开始日期的模拟效果除出苗期、越冬期的外,其他均好于单点插值方法的。单点插值方法对越冬期的模拟效果明显好于区域模拟方法的。冬小麦产量的模拟效果区域模拟方法也比单点插值方法好,但两种结果的相对误差均较大。通过对WheatSM模型得到的冬小麦气象产量模拟结果进行修订,可以明显提高模型产量模拟结果。2013—2017年鹤壁地区模拟产量的误差为-17. 92%～-2. 98%,RMSE为1114. 9 kg/hm~2,NMSE为12. 59,模拟效果较好。利用区域模拟方法可以对区域内单个站点的冬小麦生长发育和产量进行模拟,但对越冬期开始时间的模拟需要参考单点插值方法的相应结果。     

气象装备保障效能评估技术

随着气象部门装备保障业务重要性的不断提高,开展装备保障评估方法的研究,对保障质量进行科学评价成为一个新的课题。就监控、维护和维修3个装备保障子业务分别建立了各自的评估体系,还利用监控、维护和维修业务的独立性,提出了根据业务单位职责的组成,使用监控率、故障率和维修率三者的加权平均值评估装备保障综合效能的方法,对建立装备保障业务的考核体系有一定的参考借鉴意义。