Numerical study of salinity variation in a coastal aquifer: a case study of the Motooka region in western Japan

The Motooka region in the Fukuoka prefecture in western Japan is a coastal area, where groundwater is utilized as the main water resource for greenhouse agriculture and domestic use. Over-exploitation of groundwater has resulted in seawater intrusion and thus in the contamination of the freshwater aquifer. Fluctuations in electric conductivities caused by such intrusion are a crucial problem, since even slight changes in electric conductivities of the water used for agricultural purposes significantly affect the crops’ growth and yield. However, no study has thus far been conducted on the electric conductivity fluctuations caused by groundwater pumping and seasonal recharge of groundwater in the Motooka region. To this end, an attempt is made in the present study to develop a numerical variable-density solute transport model and then apply it to simulate the electric conductivity fluctuations with groundwater pumping and rainwater recharge. This model is developed under a finite difference scheme, and the method of characteristics is used as the numerical technique for solving the advection term of the advection–dispersion solute transport equation. The results from this numerical model are compared with the field measurements.     

Differences in the damage caused by hypoxia to the macrobenthic communities in source regions of hypoxic water and in regions with advected hypoxic water

The objective of this study was to determine the effects of transported hypoxic water on macrobenthic species composition in Isahaya Bay, Kyushu, Japan. To this end, we conducted a field survey of water quality, sediment quality, and the macrobenthic community across seasons. Hypoxic intensity, defined as the percentage of the time that a region exhibits hypoxic conditions [dissolved oxygen (DO) <?3.0 mg L^?1], was calculated for the summer period from July 1 to September 30, 2014 based on continuous monitoring data derived from six monitoring towers in the bay. Here, we discuss how the hypoxia-induced damage, defined as the change in the species compositions of the macrobenthic communities in the bay due to hypoxia, differs between the inner and middle regions of the bay (with muddy sediment) and the outer regions of the bay (with sandy sediment). A decrease in the density of macrobenthic species that was correlated to the period of lowest DO concentration (<?1.0 mg L^?1) was observed in the inner region of the bay. A large number of species disappeared from the macrobenthic community in the outer region after the DO concentration had dropped to its lowest level, even though this region presented the lowest hypoxic intensity (6.6%). The species that disappeared, including crustaceans and some polychaetes, were presumed to be sensitive to, and to have escaped from, hypoxia. Fewer species disappeared from the inner and intermediate regions of the bay, which had high hypoxic intensities of 14.0 and 26.7%, respectively, than from the outer region. The reason for this appeared to be a predominance of hypoxia-tolerant species in the inner and intermediate regions but not in the outer region. Our study suggests that estimating the effect of hypoxia in a spatially heterogeneous environment must be done with caution.     

Active right-lateral strike-slip fault zone along the southern margin of the Japan Sea

We describe an active right-lateral strike-slip fault zone along the southern margin of the Japan Sea, named the Southern Japan Sea Fault Zone (SJSFZ). Onshore segments of the fault zone are delineated on the basis of aerial photograph interpretations and field observations of tectonic geomorphic features, whereas the offshore parts are interpreted from single-/multichannel seismic data combined with borehole information. In an effort to evaluate late Quaternary activity along the fault zone, four active segments separated by uplifting structures are identified in this study. The east–northeast-trending SJSFZ constitutes paired arc-parallel strike-slip faults together with the Median Tectonic Line (MTL), both of which have been activated by oblique subduction of the Philippine Sea plate during the Quaternary. They act as the boundaries of three neotectonic stress domains around the eastern margin of the Eurasian plate: the near-trench Outer zone and NW–SE compressive Inner zone of southwest Japan arc, and the southern Japan Sea deformed under E–W compression from south to north.     

Hydrogen isotopic composition of MnO(OH) minerals from manganese oxide and massive sulfide (Kuroko) deposits in Japan

The hydrogen isotopic composition of structural water in MnO(OH) minerals from manganese oxide and massive sulfide deposits (Kuroko) in Tertiary formations fall within a narrow range from -261 to -275 permil relative to standard mean ocean water (SMOW). The δD of two manganites from manganese deposits in Paleozoic formations were -236 and -298 permil, indicating a wider range than in those of Tertiary manganese deposits. The MnO(OH) minerals are more deuterium-depleted. than any other hydrothermal minerals reported to date. Hydrogen isotopic fractionation factors between manganite and water were experimentally determined to be 0.7894, 0.7958, and 0.8078 at 150°, 200°, and 250° C, respectively, under hydrothermal conditions at 500 bars. The present experimental results indicate that if manganites were formed at temperatures below 250° C under isotopic equilibrium conditions, then most manganite mineralization in the ore deposits must have precipitated from meteoric hydrothermal solutions.     

Simultaneous observations of meteors with the radar and TV systems

We have carried out a simultaneous observation of radar and optical meteors with the MU radar (Middle and Upper Atmosphere Radar), Shigaraki and TV camera systems. We usually obtained about 20 meteors per an hour with 85 mm lens, but very small part of them are simultaneously observed by the MU radar (< 5%), suggesting the significance of rectangular scatterring. We have analyzed about 20 simultaneous meteors with magnitudes from 0 to +5.5, most of which are overdense meteors. For Geminid meteors, a linear relation between the logarithm of the echo duration and the absolute magnitude of the TV meteor, was deduced.     

A major change in magma sources in late Mesozoic active margin of the circum-Sea of Japan domain: Geochemical constraints from late Paleozoic to Paleogene mafic dykes in the Sergeevka belt,southern Primorye,Russia

More than 30 mafic dykes crop out in the Sergeevka belt in the coastal South Primorye, Far East Russia, of which geologic settings have been unclear for years. This study conducted major- and trace elements characterization, Sr–Nd isotope analyses, and Ar–Ar amphibole and U–Pb zircon datings for these rocks in order to identify their origin. The results demonstrated that all dykes are characterized by high Ba/Yb and low Nb/Y, Zr/Y, and Th/Yb ratios, which suggest their origin from arc melts derived from thin wedge mantle and shallow-dipping slab. These dykes are clearly separated into two distinct age/geochemistry suites; that is, the Paleogene and Early Cretaceous one with dolerites/basalts and adakitic rocks, and the Permian–Triassic one with high-Mg and high-Al gabbro-dolerite varieties. Their geochemistry suggests that the older suite was sourced from a primitive depleted MORB mantle (DMM)-type mantle, whereas the younger suite from an enriched mantle II (EM2)-type mantle domain. The transition in source type from DMM to EM2 occurred during the Jurassic-earliest Cretaceous time, probably by a strong influence of a mantle plume onto the long-continuing subduction-related magmatism. The plume influence reached the maximum when the unique meimechite-picrite complex formed in the region.     

On the response of the neutral temperature at 78°N and 90 km altitude to solar proton events

We are able to determine neutral air temperatures by examining the fading times of meteor trail echoes in the upper mesosphere/lower thermosphere. It has been suggested that solar proton events may stimulate both dynamic and aeronomic changes in the middle atmosphere and we have endeavoured to investigate this. Despite a variety of approaches to determine the background temperature above which we might expect to see enhancements under conditions of strong proton precipitation, we are unable to detect any significant changes. We have repeated the search during selected seasons and also with various proton flux thresholds, similarly to no avail. We conclude, therefore, that at 90 km altitude, 78°N and 16°E, at least, we are unable to detect enhanced neutral temperatures due to solar proton events. At best, any enhancements, predicted to be of the order of a few K only, are likely to be completely masked by the day-to-day variability of the temperature field.     

Field survey report on tsunami disasters caused by the 1993 Southwest Hokkaido earthquake

Detailed field work at Okushiri Island and along the southwest coast of Hokkaido has revealed quantitatively (1) the advancing direction of tsunami on land, (2) the true tsunami height (i.e., height of tsunami, excluding its splashes, as measured from the ground) and (3) the flow velocity of tsunami on land, in heavily damaged areas. When a Japanese wooden house is swept away by tsunami, bolts that tie the house to its concrete foundation resist until the last moment and become bent towards the direction of the house being carried away. The orientations of more than 850 of those bent bolts and iron pipes (all that can be measured, mostly at Okushiri Island) and fell-down direction of about 400 trees clearly display how tsunami behaved on land and caused serious damage at various places. The true tsunami height was estimated by using several indicators, such as broken tree twigs and a window pane. The flow velocity of tsunami on land was determined by estimating the hydrodynamic force exerted on a bent handrail and a bent-down guardrail by the tsunami throughin situ strength tests.Contrary to the wide-spread recognition after the tsunami hazard, our results clearly indicate that only a few residential areas (i.e., Monai, eastern Hamatsumae, and a small portion at northern Aonae, all on Okushiri Island) were hit by a huge tsunami, with true heights reaching 10 m. Southern Aonae was completely swept away by tsunami that came directly from the focal region immediately to the west. The true tsunami height over the western sea wall of southern Aonae was estimated as 3 to 4 m. Northern Aonae also suffered severe damage due to tsunami that invaded from the corner zone of the sand dune (8 m high) and tide embankment at the northern end of the Aonae Harbor. This corner apparently acted as a tsunami amplifier, and tide embankment or breakwater can be quite dangerous when tsunami advances towards the corner it makes with the coast. The nearly complete devastation of Inaho at the northern end of Okushiri Island underscored the danger of tsunami whose propagation direction is parallel to the coast, since such tsunami waves tend to be amplified and tide embankment or breakwater is constructed low towards the coast at many harbors or fishing ports. Tsunami waves mostly of 2 to 4 m in true height swept away Hamatsumae on the southeast site of Okushiri Island where there were no coastal structures. Coastal structures were effective in reducing tsunami hazard at many sites. The maximum flow velocity at northern Aonae was estimated as 10 to 18 m/s (Tsutsumi et al., 1994), and such a high on-land velocity of tsunami near shore is probably due to the rapid shallowing of the deep sea near the epicentral region towards Okushiri Island. If the advancing direction, true height, and flow velocity of tsunami can be predicted by future analyses of tsunami generation and progagation, the analyses will be a powerful tool for future assessment of tsunami disasters, including the identification of blind spots in the tsunami hazard reduction.     

DO-increasing effects of a microscopic bubble generating system in a fish farm

We have developed a "microscopic bubble generating system for the fish farm" and evaluated its ability to improve the quality of seawater and costs of it in marine cages of red sea bream (Pagrus major) in Kusuura Bay, Japan. Our results revealed that DO concentration of bubbling net pens increased and became significantly higher than the level outside the net pen (between 0.52 and 0.87 mg/L), and the whole water column was nearly saturated. Temperatures of the bubbling net pens decreased slightly between 0.08 and 0.12 degrees C in all the layers. Furthermore, micro-bubbles seemed to reach the deeper water due to the downward flow and diffusion. This study demonstrated that the microscopic bubble generating system developed in our research project could increase efficiently the dissolved oxygen concentration throughout all water layers of the fish farm. A capital and operation costs of the system is recoverable within a year.     

Application of an impact plate – Bedload transport measuring system for high-speed flows

To achieve the sustainable use of dams, the development of methods for sediment management in reservoirs is required. One such method includes the use of Sediment Bypass Tunnels (SBTs) to divert sediment around a dam, thereby preventing sedimentation in the reservoir. However, SBTs are prone to severe invert abrasion caused by the high sediment flux. Therefore, it is necessary to establish a measurement system of the sediment transport rate in these tunnels. One system to measure sediment transport in rivers is the Swiss plate geophone, which can register plate vibrations caused by particle impact. In Japan, the Japanese pipe microphone is used, and sediment transport is measured based on the sound emitted by the particle impact. In this study an attempt was made to optimize the advantages of both systems by fixing a microphone and an acceleration sensor to a steel plate. The results of calibration experiments with this new system are presented and compared with the existing methods. It was found that the acceleration sensor can detect sediment particles larger than 2 mm in diameter. Moreover, a new parameter, referred to as the detection rate, was introduced to describe the correlation between the actual amount of sediment and the registered output. Finally, two parameters - the saturation rate and hit rate - are introduced and exhibit strong correlation with the detection rate.