Molecular and isotopic characteristics of gas hydrate-bound hydrocarbons in southern and central Lake Baikal

We investigated the molecular composition (methane, ethane, and propane) and stable isotope composition (methane and ethane) of hydrate-bound gas in sediments of Lake Baikal. Hydrate-bearing sediment cores were retrieved from eight gas seep sites, located in the southern and central Baikal basins. Empirical classification of the methane stable isotopes (δ¹³C and δD) for all the seep sites indicated the dominant microbial origin of methane via methyl-type fermentation; however, a mixture of thermogenic and microbial gases resulted in relatively high methane δ¹³C signatures at two sites where ethane δ¹³C indicated a typical thermogenic origin. At one of the sites in the southern Baikal basin, we found gas hydrates of enclathrated microbial ethane in which ¹³C and deuterium were both highly depleted (mean δ¹³C and δD of –61.6‰ V-PDB and –285.4‰ V-SMOW, respectively). To the best of our knowledge, this is the first report of C₂ δ¹³C–δD classification for hydrate-bound gas in either freshwater or marine environments.     

Detecting red tides in the eastern Seto inland sea with satellite ocean color imagery

A multi-spectral classification scheme is proposed to identify water with red tide(s) using satellite ocean color imagery obtained by the Sea-viewing Wide Field-of-view Sensor (SeaWiFS). The study area was the eastern Seto Inland Sea in Japan, where serious red tides frequently occur. “Background Ocean Colors” (BOCs hereafter), or colors of water around a red tide or those of the water before/after a red tide, are calculated as the monthly climatological average of normalized water-leaving radiances (nLw) with 0.01 degree spatial resolution with SeaWiFS imagery. Criteria for detecting red-tide pixels are established from analyses of characteristics of the nLws (in the 443, 490, 510, and 555 nm bands) anomalies from BOCs and the nLw spectra together with the red-tide records in Osaka Bay. The proposed scheme can efficiently indicate the presence or absence of red tides for independent match-ups with 83% accuracy. Additional validations of specific events indicate that the algorithm performed well in the study area. These results suggest that the scheme is appropriate to detect red tides in the optically complex coastal water of the eastern Seto Inland Sea.     

Strontium isotopic and chemical variations of the granitic rocks in the Tsukuba district,Japan

Initial ⁸⁷Sr/⁸⁶Sr ratios, major and trace element compositions have been determined for the Paleogene granitic rocks in the Tsukuba district, Japan. Isotopic ages strongly suggest that the granitic rocks (seven units) were continuously emplaced and solidified during a short time interval. Initial ⁸⁷Sr/⁸⁶Sr ratios for seven granitic units vary from 0.7082 to 0.7132, while sedimentary and metasedimentary country rocks have ratios at the time of granitic magma emplacement ranging from 0.7149 to 0.7298. Continuous linear arrays for the granitic rocks in the diagrams of initial ⁸⁷Sr/⁸⁶Sr ratios versus some chemical parameters can be explained by either of following two processes. One is the assimilation — fractional crystallization (AFC) process between the parental magma (SiO₂ of 68% and initial ratio of 0.7078) and sedimentary country rocks, and the other is magma mixing process between above parental magma and sediment derived acidic magma (melt) (SiO₂ of 75%). The high initial ratios (0.7078–0.7098) for basic rocks such as gabbro or diorite in the Tsukuba district and the similar characteristics observed in the rocks of Ryoke belt (SW Japan) suggest that the parental magma had the same source region as the basic rocks, probably the lower crustal source.     

High time resolution monitoring of tropospheric temperature with a Radio Acoustic Sounding System (RASS)

We have observed the time-height variation of the temperature field in the upper troposphere using a Radio Acoustic Sounding System (RASS) which consists of the MU radar and a high-power acoustic transmitter. The fast beam steerability of the MU radar has made it possible to measure temperature profiles in a fairly wide height range in the upper troposphere (5–11 km), even under intense wind conditions. Observations were continued for about 32 hr on 24–26 December, 1986 with a time-height resolution of 30 min and 150 m. During the observation period, the tropospheric jet was so intense that the acoustic wavefronts were severely distorted. Using wind velocity profiles observed by the MU radar we have numerically estimated the propagation of acoustic wavefronts, and further determined favorable pointing directions for the MU radar to receive significant backscattering from refractive index fluctuations produced by the acoustic waves. Conventional radiosonde soundings were carried out every 6 hr, which showed a temperature decrease of 4 K/day in the upper troposphere during the observation period. Temperature profiles taken by RASS agree well with the radiosonde results.     

Attenuation of compressional waves in peridotite measured as a function of temperature at 200 MPa

A technique has been developed to determine attenuation in rocks at high temperature using a gas-media, high-pressure apparatus. A pulse transmission technique and a spectral ratio method are used to study compressional seismic properties of rocks. Seismic waves are transmitted to and from the sample through buffer rods of mullite. The effect of seismic wave reflections within the sample assembly are cancelled out by taking ratios of the spectra measured at different temperatures. In order to obtain good signal-to-noise ratio for resolving the attenuation at high pressure and temperature, special care is taken in the sample assembly and the ultrasonic coupling between the sample, buffer rods and transducers. A very tight connection of the sample-buffer rod-transducer is essential for obtaining high frequency signals (>300 kHz) at high temperature. A small mass is attached to each outside end of the transducer to drive low frequency signals (<250 kHz) into the sample. Before attenuation measurements, the sample and the buffer rods are tightly compacted in a platinum tube at high pressure and room temperature to ensure pressure seal of the sample assembly. The frequency range of measurement covers 50 to 450 kHz for the sample. Attenuation is very small in the buffer rod compared to the sample for the entire temperature range of the study. Because of the small attenuation, a wide frequency band of 50 kHz to 3.2 MHz can be covered for investigating the attenuation in the buffer rod. The technique has been used to measure attenuation at high confining pressure, and temperatures including sub- and hyper-solidus of upper mantle rocks. Therefore, effects of partial melting on attenuation can be studied.The method is applied to the attenuation measurement in a peridotite as a function of temperature to 1225°C at 200 MPa confining pressure. At high temperature, signal amplitude decays more rapidly at high frequency than at low frequency, from which attenuation (andQ) can be determined using a spectral ratio method. No frequency dependence ofQ is resolved for both the sample and the buffer rod over the entire temperature and frequency ranges of the measurement. The results show thatQ decreases rapidly with increasing temperature even in the temperature range below the solidus of peridotites. Such temperature sensitivity ofQ is probably more useful to probe thermal structure in the upper mantle than that of conductivity at temperatures below the solidus. The results in this study are compared with available seismic velocity, electrical conductivity and solidus data for peridotites, suggesting that there is no discontinuous change in both mechanical and electrical properties of peridotites at the solidus temperature. Even at hypersolidus temperatures, it appears that velocity drops and conductivity increases continuously (not abruptly) with increasing melt fraction. This implies that mechanical and electrical properties of the upper mantle will gradually change at the boundary where the geotherm crosses the solidus.     

H-chondrites: Trace element clues to their origin

We have analyzed 10 H-chondrites for 20 trace elements, using RNAA. The meteorites included 4 of petrologic type 4 and 2 each of types 3, 5 and 6.The data show that H-chondrites are not isochemical. H3's are depleted by some 10% not only in Fe (Dodd, 1976), but also in the siderophiles Os, Re, Ir, Ni, Pd, Au, and Ge. Moreover, the abundance pattern of siderophiles varies systematically with petrologic type. As similar fractionations of REE have been observed by Nakamura (1974), it appears that both the proportions and compositions of the main nebular condensates varied slightly during accretion of the H-chondrites. Thus the higher petrologic types are independent nebular products, not metamorphosed descendants of lower petrologic types.Abundances of highly volatile elements (Cs, Br, Bi, Tl, In, Cd, Ar³⁶) correlate with petrologic type, declining by ≤ 10^?3 from Type 3 to Type 6. The trends differ from those for artificially heated Type 3's (Ikramuddinet al., 1977b; Herzoget al., 1979), but agree passably with theoretical curves for nebular condensation. Apparently the low volatile contents of higher petrologic types are a primary feature, not the result of metamorphic loss.The mineralogy of chondrites suggests that they accreted between 405 K (absence of Fe₃O₄) and 560 K (presence of FeS), and the abundances of Tl, Bi, and In further restrict this interval to 420–500 K. Accretion at 1070 ± 100 K, as proposed by Hutchisonet al. (1979, 1980), leads to some extraordinary problems. Volatiles must be injected into the parent body after cooling, which requires permeation of the body by 10¹¹ times its volume of nebular gas. This process must also achieve a uniform distribution of the less volatile elements (Rb, Cu, Ag, Zn, Ga, Ge, Sn, Sb, Se, F), without freezeout in the colder outer layers.Factor analysis of our data shows 3 groupings: siderophiles (Os, Re, Ir, Ni, Pd, Au, and Ge), volatiles (Ag, Br, In, Cd, Bi, and Tl) and alkalis (Rb and Cs). The remaining 5 elements (U, Zn, Te, Se, and Sb) remain unassociated.     

Source models for the 1993 Hokkaido Nansei-Oki earthquake tsunami

A source model for the 1993 Hokkaido Nansei-Oki tsunami must satisfy certain conditions. Such conditions are presented in this paper, and two methods are used to determine the best source model for this event. A trial-and-error method selects DCRC-17a as the best among 24 different models. This model has three fault planes dipping westward. To reproduce well the tide gauge records at two locations, an inversion analysis is used to modify the dislocation of DCRC-17a.     

Double seismic zone beneath the middle of Hokkaido, Japan, in the southwestern side of the Kurile Arc

The vertical section of microearthquakes, determined accurately by using the Hokkaido University network, shows two dipping zones (the double seismic zone) 25–30 km apart in the depth range of 80–150 km beneath the middle of Hokkaido in the southwestern side of the Kurile arc. Hypocentral distribution of large earthquakes (m_b > 4) based on the ISC (International Seismological Centre) bulletin also shows the double seismic zone beneath the same region. The hypocentral distribution indicates that the frequency of events occurring in the lower zone is four times greater than that in the upper zone. The difference in seismic activity between the two zones beneath Hokkaido is in contrast with the region beneath northeastern Honshu in the northeastern Japan arc.Composite focal mechanisms of microearthquakes and individual mechanisms of large events mainly characterize the down-dip extension for the lower zone as is observed beneath northeastern Honshu. For the upper zone, however, the stress field is rather complex and not necessarily similar to that beneath northeastern Honshu. This may be considered to indicate the influence of slab contortion or transformation in the Hokkaido corner between the Kurile and the northeastern Japan arcs.     

Logic-tree Approach for Probabilistic Tsunami Hazard Analysis and its Applications to the Japanese Coasts

For Probabilistic Tsunami Hazard Analysis (PTHA), we propose a logic-tree approach to construct tsunami hazard curves (relationship between tsunami height and probability of exceedance) and present some examples for Japan for the purpose of quantitative assessments of tsunami risk for important coastal facilities. A hazard curve is obtained by integration over the aleatory uncertainties, and numerous hazard curves are obtained for different branches of logic-tree representing epistemic uncertainty. A PTHA consists of a tsunami source model and coastal tsunami height estimation. We developed the logic-tree models for local tsunami sources around Japan and for distant tsunami sources along the South American subduction zones. Logic-trees were made for tsunami source zones, size and frequency of tsunamigenic earthquakes, fault models, and standard error of estimated tsunami heights. Numerical simulation rather than empirical relation was used for estimating the median tsunami heights. Weights of discrete branches that represent alternative hypotheses and interpretations were determined by the questionnaire survey for tsunami and earthquake experts, whereas those representing the error of estimated value were determined on the basis of historical data. Examples of tsunami hazard curves were illustrated for the coastal sites, and uncertainty in the tsunami hazard was displayed by 5-, 16-, 50-, 84- and 95-percentile and mean hazard curves.