Sources of mud volcano fluids in the Gulf of Cadiz—indications for hydrothermal imprint

Mud volcanism in the Gulf of Cadiz occurs over a large area extending from the shelf to more than 3500 m water depth and is triggered by compressional stress along the European-African plate boundary, affecting a deeply faulted sedimentary sequence of locally more than 5 km thickness. The investigation of six active sites shows that mud volcano (MV) fluids, on average, are highly enriched in CH₄, Li, B, and Sr and depleted in Mg, K, and Br. The purity of the fluids is largely controlled by the intensity of upward directed flow. Flow rates could be constrained by numerical modelling and vary between <0.05 and 15 cm yr⁻¹. Application of δD-δ¹⁸O systematics identifies clay mineral dehydration, most likely within Mesozoic and Tertiary shales and marls, as the major source of fluids. Hence, Cl and Na in the pore fluids are mostly depleted below seawater values, following a general trend of dilution. However, deviations from this trend occur and are likely caused by the dissolution of halite in evaporitic deposits. Other secondary processes overprinting the original fluid composition may occur along the flow path, such as dissolution of anhydrite or gypsum and/or the formation of calcite and dolomite. Different sources of fluids are also indicated by variations in ⁸⁷Sr/⁸⁶Sr, which range from 0.7086 to 0.7099 at the different sites. Dehydration may be induced primarily by overburden and tectonic compression; however, very high concentrations of Li and B, specifically at Captain Arutyunov MV (CAMV) indicate additional leaching at temperatures above 150 °C, which could be explained by the injection of hot fluids along deep penetrating, major E-W strike-slip fault systems. This hypothesis is supported by the occurrence of generally thermogenic, but significantly CH₄-enriched, light volatile hydrocarbon gases at CAMV which cannot be explained by shallow microbial methanogenesis. Li and Li/B ratios from different types of hot and cold vents are used to infer that high temperature signals seem to be preserved at various cold vent locations and indicate a closer coupling of both systems in continental margin environments than outlined in previous studies.     

Pervasive horizontal fabric and rapid vertical extrusion: Lateral overturning and margin sub-parallel flow of deep crustal migmatites, northeastern Bohemian Massif

In the West Sudetes, northeastern Bohemia Massif, geochronometry provides evidence for repeated episodes of rapid cooling that contrasts sharply with an absence of structural evidence for significant tectonic exhumation by crustal extension. Instead, high-grade assemblages of the Orlica–Snieznik Complex have a regional sub-horizontal foliation and sub-horizontal lineations that trend parallel to narrow sub-vertical shear zones containing exhumed high-pressure assemblages. Mesoscopic petrofabrics combined with anisotropy of magnetic susceptibility (AMS) data from amphibolite facies to migmatitic meta-sedimentary and meta-igneous rocks reveal remarkably consistent average lineations that plunge shallowly to the SSW on both steep and sub-horizontal NNE-trending planar fabrics. The dominant SSW–NNE fabric orientation is parallel to the Bohemia–Brunia suture, which marks a major boundary along the eastern margin of the massif. The shape of the AMS ellipsoid is predominantly oblate, revealing flattened fabrics, with only local prolate ellipsoids. We envisage that the continental Brunian indentor operated as a rigid backstop and allowed the migmatized lower crustal orogenic root to be exhumed along the Bohemian margin shortly following terminal arc collision. Sub-vertical extrusion of the orogenic root was arrested in the mid-crust, where the lower ductile crust was laterally overturned at the base of rigid upper crustal blocks. Upon reaching the crustal high-strength lid the exhumed ductile mass of continental material laterally spread sub-parallel to the margin, underwent subsequent supra-Barrovian metamorphism, and quickly cooled. The application of AMS techniques to high-grade metamorphic rocks in concert with macroscopic structural observations is a powerful approach for resolving the deformation history of a terrane where visible rock fabrics can be tenuous.     

Rotational bulge and one plume convection pattern: Influence on Martian true polar wander

Motion of the entire solid planet with respect to its spin axis have been proposed on Mars. This movement is known as True Polar Wander (TPW). According to the conservation of angular momentum with no external torque, on geological time scales the axis of maximum inertia of a planet is aligned with the rotation axis. Then rearrangement of masses within the mantle disturbs the planet's inertia and induces TPW. The convection pattern on Mars is possibly controlled by a sequence of single plumes originating from the core-mantle boundary. Using a homogeneous model of the martian mantle and modelling the plume as a sphere, we calculate the inertial tensor perturbations caused by the plume mass anomaly. We investigate the stabilizing influence of the remnant rotational bulge due to the lithosphere elasticity on these perturbations. It appears that, during early martian history, the elastic lithosphere was thin enough to allow its fractures under the inertia perturbations induced by a hot plume. Consequently, the lithosphere's behaviour became effectively viscoelastic and the plume could induce large TPW. We conclude that one plume convection pattern should have greatly influenced the rotation pole behaviour during early Mars history: around 4 Gyr ago, Mars already could have experienced two TPW events lasting possibly only a few million years each. We then compare our scenario with others already published in the literature.     

Sonication of bacteria, phytoplankton and zooplankton: Application to treatment of ballast water

We investigated the effect of high power ultrasound, at a frequency of 19 kHz, on the survival of bacteria, phytoplankton and zooplankton, in order to obtain estimates of effective exposure times and energy densities that could be applied to design of ultrasonic treatment systems for ballast water. Efficacy of ultrasonic treatment varied with the size of the test organism. Zooplankton required only 3-9s of exposure time and 6-19 J/mL of ultrasonic energy to realize a 90% reduction in survival. In contrast, decimal reduction times for bacteria and phytoplankton ranged from 1 to 22 min, and decimal reduction energy densities from 31 to 1240 J/mL. Our results suggest that stand-alone ultrasonic treatment systems for ballast water, operating at 19-20 kHz, may be effective for planktonic organisms >100 microm in size, but smaller planktonic organisms such as phytoplankton and bacteria will require treatment by an additional or alternative system.     

Effects of fish farm waste on Posidonia oceanica meadows: synthesis and provision of monitoring and management tools

This paper provides a synthesis of the EU project MedVeg addressing the fate of nutrients released from fish farming in the Mediterranean with particular focus on the endemic seagrass Posidonia oceanica habitat. The objectives were to identify the main drivers of seagrass decline linked to fish farming and to provide sensitive indicators of environmental change, which can be used for monitoring purposes. The sedimentation of waste particles in the farm vicinities emerges as the main driver of benthic deterioration, such as accumulation of organic matter, sediment anoxia as well as seagrass decline. The effects of fish farming on P. oceanica meadows are diverse and complex and detected through various metrics and indicators. A safety distance of 400 m is suggested for management of P. oceanica near fish farms followed by establishment of permanent seagrass plots revisited annually for monitoring the health of the meadows.     

Comparing pristine and depleted ecosystems: The Sørfjord, Norway versus the Gulf of St. Lawrence, Canada. Effects of intense fisheries on marine ecosystems

The Sørfjord, Norway, and the Gulf of St. Lawrence, Canada, are two sub-arctic ecosystems with similar trophic structure. However, in the Gulf of St. Lawrence, severe exploitation of groundfish stocks has lead to important shifts in the trophic structure. In the Sørfjord, the situation is different: fishing pressure is much lighter. Our hypothesis is that overexploitation leads to changes in the trophic structure and severely alters the resilience of ecosystems. Based on the same modelling approach (Ecopath with Ecosim) the food web structure was compared, using different ecosystem indicators. Patterns of food web structure and trophodynamics were contrasted. Cod was the keystone species in both ecosystems, and forage fish were also important. Even after similar environmental changes in both ecosystems, and after a reduction of fishing pressure in the Gulf of St. Lawrence, there is no recovery of cod stocks in this ecosystem. In the Sørfjord, after different perturbations (but not from the fishery), the ecosystem seems to return to its equilibrium.     

Near-source particulate emissions and plume dynamics from agricultural field operations

Particulate matter emissions generated by agricultural field preparation and harvesting operations were measured remotely via aerosol lidar and sampled simultaneously with a variety of aerosol point samplers in order to quantify dust plume space and time dynamics and particulate mass and number concentrations. Data for two cotton operations (disking, harvesting) in a flood-irrigated field in New Mexico are presented. Dust plume dynamics varied with boundary layer meteorological conditions, especially atmospheric stability, with plume maximum height significantly lower under stable conditions. Plume tracking indicated little change in plume area with height under unstable conditions and plume movement depended on wind speed and direction. Particle mass distributions indicate approximately 50% of the measured PM₁₀ mass was PM_2.5, significantly higher than previously reported values, possibly due to the near-source nature of the samples collected here. Variability in plume movement matched the variability in short-term wind fluctuations and this variability helps explain why models that utilize long-term averages perform poorly when trying to capture plume dynamics for nonsteady sources such as tractor operations.     

Chemical characterization and multivariate analysis of atmospheric PM<Subscript>2.5</Subscript> particles

The new European Council Directive (PE-CONS 3696/07) frames the inhalable (PM₁₀) and fine particles (PM_2.5) on priority to chemically characterize these fractions in order to understand their possible relation with health effects. Considering this, PM_2.5 was collected during four different seasons to evaluate the relative abundance of bulk elements (Cl, S, Si, Al, Br, Cu, Fe, Ti, Ca, K, Pb, Zn, Ni, Mn, Cr and V) and water soluble ions (F⁻, Cl⁻, NO₂ ⁻, NO₃ ⁻, SO₄ ²⁻, Na⁺, NH₄ ⁺, Ca²⁺ and Mg²⁺) over Menen, a Belgian city near the French border. The air quality over Menen is influenced by industrialized regions on both sides of the border. The most abundant ionic species were NO₃ ⁻, SO₄ ²⁻ and NH₄ ⁺, and they showed distinct seasonal variation. The elevated levels of NO₃ ⁻ during spring and summer were found to be related to the larger availability of the NO_x precursor. The various elemental species analyzed were distinguished into crustal and anthropogenic source categories. The dominating elements were S and Cl in the PM_2.5 particles. The anthropogenic fraction (e.g. Zn, Pb, and Cu) shows a more scattered abundance. Furthermore, the ions and elemental data were also processed using principal component analysis and cluster analysis to identify their sources and chemistry. These approach identifies anthropogenic (traffic and industrial) emissions as a major source for fine particles. The variations in the natural/anthropogenic fractions of PM_2.5 were also found to be a function of meteorological conditions as well as of long-range transport of air masses from the industrialized regions of the continent. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.