Cross-Calibration and Long-Term Monitoring of the Microwave Radiometers of ERS, TOPEX, GFO, Jason, and Envisat

The radiometers on board the satellites ERS-1, TOPEX/Poseidon, ERS-2, GFO, Jason-1, and Envisat measure brightness temperatures at two or three different frequencies to determine the total columnal water vapor content and wet tropospheric path delay, a major correction to the altimeter range measurements. In order to asses the long-term stability of the path delay, the radiometers are calibrated against vicarious cold and hot references, against each other, and against several atmospheric models. Four of these radiometers exhibit significant drifts in at least one of the channels, resulting in yet unmodeled errors in path delay of up to 1 mm/year, thus limiting the accuracy at which global sea level rise can be inferred from the altimeter range measurements.     

The European coastal zone: characterization and first assessment of ecosystem metabolism

The geomorphic, oceanographic, terrestrial and anthropogenic attributes of the European coastal zone are described and published data on ecosystem function (primary production and respiration) are reviewed. Four regions are considered: the Baltic Sea, Mediterranean Sea, Black Sea and the European Atlantic coast including the North Sea. The metabolic database (194 papers) suffers from a non-homogeneous geographical coverage with no usable data for the Black Sea which was therefore excluded from this part of our study. Pelagic gross primary production in European open shelves is, by far, the most documented parameter with an estimated mean of 41 mmol C m⁻² d⁻¹, the lowest value is reported in the Mediterranean Sea (21 mmol C m⁻² d⁻¹) and the highest one in the Atlantic/North Sea area (51 mmol C m⁻² d⁻¹). Microphytobenthic primary production, mostly measured in shallow areas, is extrapolated to the entire 0–200 m depth range. Its contribution to total primary production is low in all regions (mean: 1.5 mmol C m⁻² d⁻¹). Although macrophyte beds are very productive, a regional production estimate is not provided in this study because their geographical distribution along the European coastline remains unknown. Measurements of pelagic community respiration are clearly too sparse, especially below the euphotic zone, to yield an accurate picture of the fate of organic matter produced in the water column. With a mean value of 17 mmol C m⁻² d⁻¹, benthic community respiration consumes approximately 40% of the pelagic organic matter production. Estuaries generally exhibit high metabolic rates and a large range of variation in all parameters, except microphytobenthic primary production. Finally, the problem of eutrophication in Europe is discussed and the metabolic data obtained in the framework of the Land–Ocean Interactions in the Coastal Zone (LOICZ) project are compared with available direct measurements of net ecosystem production.     

Usefulness of classification and index properties of clay-rich sediments in evaluating sea-bed environmental conditions

A comprehensive study of undisturbed, mostly silty clay samples, taken from large-diameter surface cores collected in the North Atlantic and its bordering seas, shows that measurement of the Atterberg limits, water content, specific gravity of grains and grain-size distribution can provide the basis for predicting many seabed geotechnical and geophysical properties which can lead to a quick assessment of environmental conditions. Thus, the sediment compression curve can be reconstructed, acoustic properties assessed, electrical and thermal resistivities deduced and an indication of the shearing forces, which have affected the sediment, inferred.     

Wavelet analysis of bathymetric sidescan sonar data for the classification of seafloor sediments in Hopvågen Bay - Norway

In this paper we examine the use of bathymetric sidescan sonar for automatic classification of seabed sediments. Bathymetric sidescan sonar, here implemented through a small receiver array, retains the advantage of sidescan in speed through illuminating large swaths, but also enables the data gathered to be located spatially. The spatial location allows the image intensity to be corrected for depth and insonification angle, thus improving the use of the sonar for identifying changes in seafloor sediment. In this paper we investigate automatic tools for seabed recognition, using wavelets to analyse the image of Hopvågen Bay in Norway. We use the back-propagation elimination algorithm to determine the most significant wavelet features for discrimination. We show that the features selected present good agreement with the grab sample results in the survey under study and can be used in a classifier to discriminate between different seabed sediments.     

Spatial and temporal variability of crustal magnetization of a slowly spreading ridge: Mid-Atlantic Ridge (20°–24° N)

The results of the two- and three-dimensional magnetic inversions performed on data located between 20°–24° N on the Mid-Atlantic Ridge indicate the crustal magnetization has decayed exponentially for the last 10 Ma, and that this decay has been fairly symmetric about the ridge axis. After removal of the mean temporal decay, the residual field is characterized by more positive magnetizations at the second-order discontinuities, regardless of initial magnetization direction. A model that involves the preferential emplacement of serpentinized lithologies near the discontinuities is proposed to explain this correlation. The temporal detrending method also indicates that several ridge-parallel depressions located on the flanks of the ridge axis are regions of more positive magnetizations. These bathymetric depressions may mark the locations of detachment faulting that occurred during amagmatic periods of extension. The general symmetry of the crustal magnetization about the ridge axis does not support the occurrence of continuous detachment faulting proposed to correspond to the inner and outer corners of ridge axis discontinuities.     

The environmental management of shipping

The environmental management of shipping requires systematic consideration of the geography of shipping routes, ship types and cargoes, and environments which can form the basis of a classificatory approach to Environmental Impact Assessment (EIA). Beyond this, effective environmental management depends in the first instance upon sound information management including monitoring of the environment, surveillance of shipping and information technology, followed by information assessment including, in particular, risk and environmental impact. The general management dimension includes co-ordination of technical management and organisational aspects related to shipping. It is suggested that effective environmental management of shipping may depend upon a regionalisation of the marine environment for EIA purposes akin to that found in the loadline rules, together with rationalisation of the increasing number of special areas in existence or proposed for this purpose. EIA will have to become an integral part of the overall management system in the shipping industry.     

Cross-shelf exchange in a model of the Ross Sea circulation and biogeochemistry

Transport of warm, nutrient-rich Circumpolar Deep Water (CDW) onto Antarctic continental shelves and coastal seas has important effects on physical and biological processes. The present study investigates the locations of this transport and its dynamics in the Ross Sea with a high-resolution three-dimensional numerical model. The model circulation is forced by daily wind stress along with heat and salt fluxes calculated from atmospheric climatologies by bulk formulae. All surface fluxes are modified by an imposed climatological ice cover. Waters under the Ross Ice Shelf are not included explicitly, but their effect on temperature and salinity is imposed in a buffer zone at the southern end of the model domain. A simple nutrient uptake is calculated based on the climatological chlorophyll distribution and Monod uptake kinetics.Model circulation is strongly affected by bottom topography, due to weak stratification, and agrees with schematics of the general flow and long-term current measurements except near the southern boundary. The sea-surface temperature is similar to satellite estimates except that the warmest simulated temperatures are slightly higher than observations. There is a significant correlation between the curvature of the shelf break and the transport across the shelf break. A momentum term balance shows that momentum advection helps to force flow across the shelf break in specific locations due to the curvature of the bathymetry (that is, the isobaths curve in front of the flow). For the model to create a strong intrusion of CDW onto the shelf, it appears two mechanisms are necessary. First, CDW is driven onto the shelf at least partially due to momentum advection and the curvature of the shelf break; then, the general circulation on the shelf takes the CDW into the interior.     

Autochthonous inheritance of zircon through Cretaceous partial melting of Carboniferous plutons: the Arthur River Complex,Fiordland, New Zealand

TIMS and SHRIMP U–Pb analyses of zircons from Milford Orthogneiss metadiorite (P = 1–1.4 GPa; T ≥ 750°C) of the Arthur River Complex of northern Fiordland reveal a bimodal age pattern. Zircons are predominantly either Paleozoic (357.0 ± 4.2 Ma) and prismatic with oscillatory zoning, or Cretaceous (133.9 ± 1.8 Ma) and ovoid with sector or patchy zoning. The younger age component is not observed overgrowing older grains. Most grains of both ages are overgrown by younger Cretaceous (~120 Ma) metamorphic zircon with very low U and Th/U (0.01). We interpret the bimodal ages as indicating initial igneous emplacement and crystallisation of a dioritic protolith pluton at ~357 Ma, followed by Early Cretaceous granulite-facies metamorphism at ~134 Ma, during which a significant fraction (~60%) of the zircon grains dissolved, and subsequently reprecipitated, effectively in situ, in partial melt pockets. The remaining ~40% of original Paleozoic grains were apparently not in contact with the partial melt, remained intact, and show only slight degrees of Pb loss. Sector zoning of the Cretaceous grains discounts their origin by solid state recrystallisation of Paleozoic grains. The alternative explanation—that the Paleozoic component represents a 40% inherited component in an Early Cretaceous transgressive dioritic magma—is considered less likely given the relatively high solubility of zircon in magma of this composition, the absence of 134 Ma overgrowths, the single discrete age of the older component, equivalent time-integrated ¹⁷⁷Hf/¹⁷⁶Hf compositions of both age groups, and the absence of the Cambrian-Proterozoic detrital zircon that dominates regional Cambro-Ordovician metasedimentary populations. Similar bimodal Carboniferous-Early Cretaceous age distributions are characteristic of the wider Arthur River Complex; 8 of 12 previously dated dioritic samples have a Paleozoic component averaging 51%. Furthermore, the age and chemical suite affinity of these and several more felsic rocks can be matched with those of the relatively unmetamorphosed Carboniferous plutonic terrane along the strike of the Mesozoic margin in southern Fiordland, also supporting the in situ derivation of the Carboniferous “inherited” component.