The first absolute gravity measurements in Indonesia

For the purposes of the calibration of the superconducting gravimeter (SG) in Bandung and the establishment of the absolute gravity (AG) points, we carried out AG measurements for the first time in Indonesia in November 2002. The measurements in Bandung were conducted between November 15th and 20th by means of a FG5 (#210), and 14,520 effective drops were obtained. The gravity value newly determined at the AG point in Bandung is 977976701.2 μgal (1 μgal = 10⁻⁸ ms⁻²) and the scale factor for the SG is −52.22 μgal/V. We also established another AG point in Yogyakarta near Merapi volcano and carried out AG measurements in Yogyakarta between November 22nd and 26th. The gravity value determined for this station is 978203093.5 μgal.     

武汉和京都台站超导重力仪高精度潮汐重力观测结果

利用高精度潮汐重力场观测研究地球物理学和地球动力学问题已成为当今地学工作者的共识.由于某些信号十分微弱且具有区域和全球分布特征,相当一部分信号被混合在常规仪器的观测噪声水平上,因此获得全球分布的第一手高精度观测资料显得尤为重要.超导重力仪具有精度高,连续性和稳定性好等特征,期望能在测定区域和全球重力场的精细结构方面发挥重要作用.有18个台站参加的全球地球动力学合作项目于1997年7月份开始实施,其主要目的是解决诸如固体潮、地核近周日晃动、核模、地球自转和极移,地球和大气海洋的耦合机理以及由构造运动引起的重力场变化等热点问题.我们曾研究过中比法三国的超导重力仪潮汐观测资料,获得了欧洲和亚洲不同地区潮汐常数及分布特征.本文将利用武汉和日本京都三台超导重力仪观测资料研究亚洲地区大陆和海岛上的潮汐波振幅因子和相位滞后的时间变化特征以及各参数的误差估计等,同时将检测由大气和海潮变化产生的重力信号.文章分数据处理方法、潮汐参数测定、大气重力信号、海潮重力信号、潮汐参数的时间变化、非潮汐重力场变化特征等几方面叙述.     

Crystal bending,subgrain boundary development,and recrystallization in orthopyroxene during granulite-facies deformation

A prominent feature of a granulite-facies shear zone from the Hidaka Main Zone (Japan) is the folding of orthopyroxene (opx) porphyroclasts. Dislocation density estimated by transmission electron microscope (TEM) and chemical etching in homogeneously folded domains is too low to account for the amplitude of crystallographic bending, leading us to propose a model similar to “flexural slip” folding, where folded layers are micrometer-wide opx layers between thin planar clinopyroxene (cpx) exsolutions. Extension (compression) in the extrados (intrados) of the folded layer is accommodated by dislocations at the cpx–opx interfaces. Alternatively to distributed deformation, crystal bending also localizes in grain boundaries (GBs), mostly oriented close to the (001) plane and with various misorientation angles but misorientation axes consistently close to the b-axis. For misorientation up to a few degrees, GBs were imaged as tilt walls composed of regularly spaced (100)[001] dislocations. For misorientation angles of 7°, individual dislocations are no longer visible, but high-resolution TEM (HRTEM) observation showed the partial continuity of opx tetrahedral chains through the boundary. For 21° misorientation, the two adjacent crystals are completely separated by an incoherent boundary. In spite of these atomic-scale variations, all GBs share orientation and rotation axis, suggesting a continuous process of misorientation by symmetric incorporation of (100)[001] dislocations. In addition to the dominant GBs perpendicular to the (100) plane, boundaries at low angle with (100) planes are also present, incorporating dislocations with a component of Burgers vector along the a-axis. The two kinds of boundaries combine to delimit subgrains, which progressively rotate with respect to host grains around the b-axis, eventually leading to recrystallization of large porphyroclasts.     

Tidal effect on dynamics of pore water nitrate in intertidal sediment of a eutrophic Estuary

To evaluate the effect of the tidal cycle on the pore water nitrate dynamics in intertidal sediment, concentrations of inorganic nitrogen in water and sediment were monitored during tidal cycles in the mud flat of Tama Estuary, Japan. During submergence, nitrate concentration was highest in the overlying water and decreased monotonically with increasing depth in the sediment, suggesting that the primary source of nitrate in the sediment was nitrate transported from the overlying water. Pore water nitrate decreased remarkably during the initial 3–4 hours after the onset of exposure. Thereafter, it was constant or slightly increased until tidal flooding.In situ accumulation of nitrate at the end of exposure, however, did not exceed the nitrate concentrations in the overlying water. The inhibition of nitrate reduction and the stimulation of nitrification would explain the change of nitrate concentration, both consistent with the input of oxygen into the sediment following a 10 mm drop of the water table. In Tama Estuary sediments, the effect of the tidal cycle on the removal of combined nitrogen is rather negative, because high nitrate concentrations in the overlying water canceled the positive effect of nitrate accumulation by nitrification during exposure, while tidal oxygen intrusion have an inhibitory effection sedimentary denitrification.     

Effect of NAPL Source Morphology on Mass Transfer in the Vadose Zone

The generation of vapor‐phase contaminant plumes within the vadose zone is of interest for contaminated site management. Therefore, it is important to understand vapor sources such as non‐aqueous‐phase liquids (NAPLs) and processes that govern their volatilization. The distribution of NAPL, gas, and water phases within a source zone is expected to influence the rate of volatilization. However, the effect of this distribution morphology on volatilization has not been thoroughly quantified. Because field quantification of NAPL volatilization is often infeasible, a controlled laboratory experiment was conducted in a two‐dimensional tank (28 cm × 15.5 cm × 2.5 cm) with water‐wet sandy media and an emplaced trichloroethylene (TCE) source. The source was emplaced in two configurations to represent morphologies encountered in field settings: (1) NAPL pools directly exposed to the air phase and (2) NAPLs trapped in water‐saturated zones that were occluded from the air phase. Airflow was passed through the tank and effluent concentrations of TCE were quantified. Models were used to analyze results, which indicated that mass transfer from directly exposed NAPL was fast and controlled by advective‐dispersive‐diffusive transport in the gas phase. However, sources occluded by pore water showed strong rate limitations and slower effective mass transfer. This difference is explained by diffusional resistance within the aqueous phase. Results demonstrate that vapor generation rates from a NAPL source will be influenced by the soil water content distribution within the source. The implications of the NAPL morphology on volatilization in the context of a dynamic water table or climate are discussed.     

Tectonics and sedimentation around Kashinosaki Knoll: A subducting basement high in the eastern Nankai Trough

Abstract   When seamounts and other topographic highs on an oceanic plate are subducted, they cause significant deformation of the overriding plate and may act as asperities deeper in the seismogenic zone. Kashinosaki Knoll (KK) is an isolated basement high of volcanic origin on the subducting Philippine Sea Plate that will soon be subducted at the eastern Nankai Trough. Seismic reflection imaging reveals a thick accumulation of sediments (∼1200 m) over and around the knoll. The lower portion of the sedimentary section has a package of high-amplitude, continuous reflections, interpreted as turbidites, that lap onto steep basement slopes but are parallel to the gentler basement slopes. Total sediment thickness on the western and northern slopes is approximately 40–50% more than on the summit and southeastern slopes of KK. These characteristics imply that the basal sedimentary section northwest of KK was deposited by infrequent high-energy turbidity currents, whereas the area southeast of KK was dominated by hemipelagic sedimentation over asymmetric basement relief. From the sediment structure and magnetic anomalies, we estimate that the knoll likely formed near the spreading center of the Shikoku Basin in the early Miocene. Its origin differs from that of nearby Zenisu Ridge, which is a piece of the Shikoku Basin crust uplifted along a thrust fault related to the collision of the Izu–Bonin arc and Honshu. KK has been carried into the margin of the Nankai Trough, and its high topography is deflecting Quaternary trench turbidites to the south. When KK collides with the accretionary prism in about 1 My, the associated variations in sediment type and thickness around the knoll will likely result in complex local variations in prism deformation.     

A Simple Monte Carlo Method for Locating the Three-dimensional Critical Slip Surface of a Slope

Based on the assumption of the plain-strain problem, various optimization or random search methods have been developed for locating the critical slip surfaces in slope-stability analysis, but none of such methods is applicable to the 3D case. In this paper, a simple Monte Carlo random simulation method is proposed to identify the 3D critical slip surface. Assuming the initial slip to be the lower part of a slip ellipsoid, the 3D critical slip surface is located by means of a minimized 3D safety factor. A column-based 3D slope stability analysis model is used to calculate this factor. In this study, some practical cases of known minimum safety factors and critical slip surfaces in 2D analysis are extended to 3D slope problems to locate the critical slip surfaces. Compared with the 2D result, the resulting 3D critical slip surface has no apparent difference in terms of only cross section, but the associated 3D safety factor is definitely higher.     

Anhydrous and water-saturated melting experiments of an olivine andesite from Mt Yakushi-Yama, northeastern Shikoku, Japan

Abstract Melting experiments have been carried out on an olivine andesite of Mt Yakushi-Yama from the Miocene Setouchi volcanic belt in northeastern Shikoku, Japan. This andesite has been characterized by a low ratio of FeO*/Mg° (= 0.78). Phase relations have been determined within the pressure range of 2.8 to 19.3 kbar at 1000-1300°C under anhydrous and water-saturated conditions. At pressures less than 8.8 kbar, olivine is a liquidus phase. Orthopyroxene appears on the liquidus at 9.3 kbar under the anhydrous conditions. The multiple saturation point rises up to 17.5 kbar for water-saturated experiments. The andesite melt coexists with olivine and orthopyroxene just below the liquidus at 8.8–9.3 kbar and 1230°C for dry conditions, and at 17.5 kbar and 1060°C under water-saturated conditions. These experimental results indicate that the Yakushi-Yama olivine andesite magma could coexist with a harzburgitic mantle at depths between about 30 and 60 km, and at temperatures between 1060 and 1230°C. Experimental data also suggest a possibility that a high magnesian andesite magma would be generated by a direct partial melting of the uppermost harzburgitic mantle under anhydrous conditions.     

Sensitivity of Salt-leached Clay Sediments in the Ariake Bay Area,Japan

This study aims to determine whether the principle that “divalent cation predominance in the pore water precludes quick clay development” applies to the Ariake Bay sediments. The chemical and geotechnical properties of an Ariake clay sediment are presented, and sensitivity is discussed with a focus on pore-water salinity and cation composition. In recent years, reduction of pore-water salinity has occurred due to permeation of river water through the sediments because of overpumping of groundwater. Sodium remains the dominant pore-water cation in an upper zone, whereas divalent cations are dominant in the deeper zone. Divalent cation domination in the deeper zone is ascribed to Ca release from nearby cement-stabilized sediments and to Mg increase in response to a change in river water quality. The upper zone's sensitivity ranged from 15 to 77, and the remolded strength was mostly <0.5 kPa, such that quick clay was present over much of its depth. In contrast, the deeper zone's sensitivity was <40, and its remolded strength exceeded 0.5 kPa; quick clay was not present despite the <2 g/L salinity. The absence of quick clay is ascribed to the high remolded strength caused by the pore-water divalent to monovalent cation ratio being greater than 0.25.