The development of Fe-nodules surrounding biological material mediated by microorganisms

Takashikozo is a phenomenon of Quaternary sediments in Japan. They are cylindrical Fe-oxyhydroxide nodules that form as plaques round plant roots, where Fe is preferentially concentrated to develop a solid wall. Structural features suggest that after the roots have decayed, the central space where the roots were situated acts as a flow path for oxidized water. Analysis of microbial 16S rDNA extracted from the nodules identified iron-oxidizing bacteria encrusted round the roots where they are the likely initiators of nodule formation. Direct microscopic observation revealed an accumulation of Fe-oxyhydroxides that fill the pore spaces and is also likely to be linked with the encrusting microbial colonies. Geological history and nanofossil evidence suggest that these Fe-nodules may have been buried at a depth of up to several tens of meters for at least 10⁵ years in reducing Quaternary sediments. Thus Fe-oxyhydroxide nodules that have formed in a geological environment at the interfaces between water and rock by microbial mediation can persist under reducing conditions. If this is the case, the phenomenon is significant as an analogue of post-closure conditions in radioactive waste repositories, since it could influence nuclide migration.     

Origin of wehrlite cumulates in the Moho transition zone of the Neoproterozoic Ras Salatit ophiolite,Central Eastern Desert,Egypt: crustal wehrlites with typical mantle characteristics

Ultramafic cumulates, mainly crustal true wehrlites, were discovered and described in the mantle–crust transition zone (MTZ) and the extremely lower layered gabbro sequence of the Ras Salatit ophiolite, Central Eastern Desert, Egypt. They form either boudinaged lensoidal tabular bodies or interdigitated layers often concordant with the planolinear fabrics of the Ras Salatit ophiolite rocks. The contact between wehrlites and the host MTZ dunite or layered gabbro is razor sharp, lobate and/or sinuous, without chilled margins or any visible deformations. The Ras Salatit wehrlites are orthopyroxene-free and composed mainly of olivine and clinopyroxene. They are texturally equilibrated and show a characteristic poikilitic texture. Crystallization order of the Ras Salatit wehrlites is olivine/spinel followed by clinopyroxene with the absence of plagioclase. Olivine and clinopyroxene of the Ras Salatit wehrlites are compositionally uniform and conspicuously high in Mg#, mostly around 0.93 and 0.92, respectively. Moreover, the clinopyroxene shows low Ti and Al contents coupled with marked depletion in LILE. The calculated melt in equilibrium with clinopyroxene from the Ras Salatit wehrlites is largely similar to lavas from the Izu-Bonin forearc. Given the above characteristics, the Ras Salatit wehrlites were produced by crystal accumulation from a hydrous depleted basaltic/tholeiitic melt corresponding to temperatures between 1,000 and 1,100°C at the oceanic crustal pressure (~2 kbar). The involved hydrous tholeiitic melt has been probably formed by fluid-assisted partial melting of a refractory mantle source (similar to the underlying harzburgites) in a somewhat shallow sub-arc environment.     

Field Survey of Tsunami Effects in Sri Lanka due to the Sumatra-Andaman Earthquake of December 26, 2004

The December 26, 2004 Sumatra-Andaman earthquake that registered a moment magnitude (M_w) of 9.1 was one of the largest earthquakes in the world since 1900. The devastating tsunami that resulted from this earthquake caused more casualties than any previously reported tsunami. The number of fatalities and missing persons in the most seriously affected countries were Indonesia - 167,736, Sri Lanka - 35,322, India - 18,045 and Thailand - 8,212. This paper describes two field visits to assess tsunami effects in Sri Lanka by a combined team of Japanese and Sri Lankan researchers. The first field visit from December 30, 2004 – January 04, 2005 covered the western and southern coasts of Sri Lanka including the cities of Moratuwa, Beruwala, Bentota, Pereliya, Hikkaduwa, Galle, Talpe, Matara, Tangalla and Hambantota. The objectives of the first field visit were to investigate the damage caused by the tsunami and to obtain eyewitness information about wave arrival times. The second field visit from March 10–18, 2005 covered the eastern and southern coasts of Sri Lanka and included Trincomalee, Batticaloa, Arugam Bay, Yala National Park and Kirinda. The objectives of the second visit were mainly to obtain eyewitness information about wave arrival times and inundation data, and to take relevant measurements using GPS instruments.     

Paleostress orientation from 3-D orientation distribution of microcracks in quartz from the Cretaceous granodiorite core samples drilled through the Nojima Fault, south-west Japan

Abstract The orientations of both healed extension microcracks and microcracks in quartz grains sealed mostly by carbonate minerals were measured from Cretaceous granodiorite core samples drilled along the Nojima Fault, southwest Japan. The preferred orientations of both healed and sealed microcracks consist of approximately three orthogonal sets, (components) A, B and C, in which A strikes NS–NW-SE and dips vertically, B strikes EW–NE-SW and dips vertically, and C is subhorizontal. Both the healed and sealed microcracks were possibly formed by hydraulic fracturing, and the successive release of tensile stress due to pore fluid overpressure in the principal stress directions could have caused this microcracking in mutually orthogonal directions. The quartz grains are also very moderately plastically deformed, which is indicated by the occurrence of kink bands and undulose extinction. The association of healed microcracks and kink bands in the quartz suggests that these microstructures formed under subgreenschist facies conditions (≈300°C) during hydrothermal activity that could have occurred immediately after the emplacement of granodiorite during the Late Cretaceous period. Based on both the preferred orientation of microcracks, and c-axis fabrics of kinked and unkinked grains (so called kink method), it is inferred that the σ₁-and σ₃-axis were oriented horizontally in NS–NW-SE and EW–NE-SW directions, respectively. The inferred paleostress field does not conform to the east–west-trending compression during the Quaternary period, but to the activation of EW–NE-SW-trending, left–lateral strike–slip faults during the Late Cretaceous period in southwest Japan.     

The b value spectrum and η value by the moment method

ＴｈｅｂｖａｌｕｅｓｐｅｃｔｒｕｍａｎｄηｖａｌｕｅｂｙｔｈｅｍｏｍｅｎｔｍｅｔｈｏｄＴｏｒｕＯｕｃｈｉ（大内）ＤｅｐａｒｔｍｅｎｔｏｆＥａｒｔｈＳｃｉｅｎｃｅｓ，ＦａｃｕｌｔｙｏｆＳｃｉｅｎｃｅ，ＫｏｂｅＵｎｉｖｅｒｓｉｔｙ，Ｋｏｂｅ，６５７，...     

Geological and Hydrodynamical Examination of the Bathyal Tsunamigenic Origin of Miocene Conglomerates in Chita Peninsula, Central Japan

A conglomerate appears on a rocky coast called ??Tsubutega-ura Coast??, located on the southwestern coast near the southern tip of the Chita Peninsula, Aichi Prefecture, central Japan. The conglomerate belongs to Miocene sedimentary rocks termed the Morozaki Group. The conglomerate includes meter-scale boulders, indicating that it was formed by an extraordinary event. In the geological investigation, we observed that the conglomerate shows alternate changes of paleocurrent directions between seaward and landward. This feature is supposed to be formed by tsunami currents. In the hydrodynamical investigation, we obtained following results: (1) the lowest limit of a current velocity to move a boulder of about 3?m in diameter would be about 2?C3?m/s, (2) the speed of tsunami currents reproduced by tsunami simulation exceeds 3?m/s at 300?m in depth when the tsunami is generated by a gigantic earthquake with magnitude 9.0 or more, (3) the transport distance of the boulder would be several hundred?meters to several kilometers by one tsunami event caused by a gigantic earthquake. We conclude that tsunamis best explain the formation of the conglomerate deposited in upper bathyal environments about 200?C400?m depth, both from geological and hydrodynamical viewpoints.     

Relationship between atmospheric conditions at Dhaka, Bangladesh, and rainfall at Cherrapunjee, India

To improve flood forecasting, the understanding of the atmospheric conditions associated with severe rainfall is crucial. We analysed the atmospheric conditions at Dhaka, Bangladesh, using upper-air soundings. We then compared these conditions with daily rainfall variations at Cherrapunjee, India, which is a main source of floodwater to Bangladesh, and a representative sample of exceptionally heavy rainfall events. The analysis focussed on June and July 2004. June and July are the heaviest rainfall months of the year at Cherrapunjee. July 2004 had the fourth-heaviest monthly rainfall of the past 31 years, and severe floods occurred in Bangladesh. Active rainfall periods at Cherrapunjee corresponded to “breaks” in the Indian monsoon. The monsoon trough was located over the Himalayan foothills, and strong westerly winds dominated up to 7 km at Dhaka. Near-surface wind below 1 km had southerly components, and the wind profile had an Ekman spiral structure. The results suggest that rainfall at Cherrapunjee strongly depends on the near-surface wind speed and wind direction at Dhaka. Lifting of the near-surface southerly airflow by the Meghalaya Plateau is considered to be the main contributor to severe rainfall at Cherrapunjee. High convective available potential energy (CAPE) also contributes to intense rainfall.     

Influence of interaction between small asperities on various types of slow earthquakes in a 3-D simulation for a subduction plate boundary

Recently, the occurrence of slow earthquakes such as low-frequency earthquakes and very low-frequency earthquakes have been recognized at depths of about 30 km in southwest Japan and Cascadia. These slow earthquakes occur sometimes in isolation and sometimes break into chain-reaction, producing tremor that migrates at a speed of about 5–15 km/day and suggesting a strong interaction among nearby small asperities. In this study, we formulate a 3-D subduction plate boundary model with two types of small asperities chained along the trench at the depth of 30 km. Our simulation succeeds in representing various types of slow earthquakes including low-frequency earthquakes and rapid slip velocity in the same asperity, and indicates that interaction between asperities may cause the very low-frequency earthquakes. Our simulation also shows chain reaction along trench with propagation speed that can be made consistent with observations by adjusting model parameters, which suggests that the interactions also explain the observed migration of slow earthquakes.