The near infrared camera on the W.M. Keck telescope

The near infrared camera (NIRC) was used for a science demonstration run on the Keck telescope during 16–24 March 1993. The camera used a 256×256 InSb array manufactured by Santa Barbara Research Corporation. Observations were obtained using narrowband and broad band filters from 1 to 2.4 microns, and grisms with a spectral resolution of 0.6 percent in the J, H and K atmospheric windows. The instrument was fully background limited over the entire wavelength range. The sky background was quite low, reaching 14.3 mag/square arc sec in the broadband K _s filter. The image quality of the camera + telescope was excellent, being seeing limited in the range 0.5–0.9.The science demonstration observations of the NIRC on the Keck Telescope included observations of the most distant galaxy known, 4C41.17 at a redshift z=3.8 and the most luminous object known, the IRAS source FSC10214+4724 at a redshift z=2.29. Observations of the radio galaxy address the problem of the alignment effect in high redshift radio galaxies as well as the environments of such systems. FSC10214+4724 appears to be a merging galaxy that is at least 5×10⁸ years old.Based on observations obtained at the W.M.Keck Observatory, which is operated jointly by the California Institute of Technology and the University of CaliforniaThe W.M. Keck Observatory is operated as a scientific partnership between the California Institute of Technology and the University of California. It was made possible by the generous gift of the W.M. Keck foundation and the support of its president, Howard Keck.     

Mid-infrared imaging of ultracompact H II regions

We discuss preliminary results of an 11.7 m imaging survey of ultracompact H II regions from the Wood and Churchwell radio survey. We find that that the morphologies of ionized gas and warm dust are often significantly different, indicating that an H II region classification scheme should be based on more than radio data.     

Deposition and diagenesis of the lacustrine-fluvial Cangfanggou Group (uppermost Permian to Lower Triassic), southern Junggar Basin,NW China: a contribution from sequence stratigraphy

The Junggar Basin in NW China contains lacustrine hydrocarbon source rocks which are among the highest quality of hydrocarbon potential in the world. Oil reservoirs in the basin are very substantial: target reservoirs span Carboniferous to Tertiary strata and include Permo-Triassic lacustrine and fluvial sandstones. The Junggar Basin was a foreland basin during the late Permian to Cenozoic, possibly with strike-slip tectonics at the southern margin during Mesozoic time. The Cangfanggou Group, as one of the major reservoirs, is well-exposed in the eastern part of the southern Junggar Basin. A measured outcrop section and a number of borehole logs coupled with resistivity logs were used to attempt sequence stratigraphic analysis. Detailed sedimentological studies on the outcrops and borehole cores have demonstrated that the Cangfanggou Group is characterized by alternating lacustrine and fluvial deposits. Four depositional sequences have been recognized. For each sequence, the basal boundary is marked by erosional truncation of fluvial channel conglomeratic sandstones in sharp contact with underlying lacustrine or floodplain mudstones. The top of each lowstand systems tract is normally overlain by the transition to lacustrine or maximum flooding surface. The transgressive systems tract is normally not identifiable at the basin margin, but was developed in the basinward area and characterized by interbedded fining-upward distal fluvial and shallow lacustrine deposits. The highstand systems tract at the basin margin is characterized by very thick floodplain mudstones or shallow lacustrine deposits, and by typical coarsening-upward parasequences of shallow lacustrine deposits in more basinward areas. Sediment input to the basin was controlled by tectonics and climate. Depositional sequences were probably controlled by fluctuating change of lake level: this was in turn controlled by climate (runoff), modified by tectonics in specific areas.The sandstones studied are exclusively volcanic litharenites. Diagenetic studies suggest that the calcite cementation, pore-filling clay minerals and zeolites occluded substantial porosity in the sandstones examined because they are compositionally immature. However, notable secondary porosity in varying proportions is present in the sandstones of the Cangfanggou Group, resulting from the dissolution of unstable detrital grains. The lowstand fluvial/distal fluvial sandstones recorded the highest average porosity and highest permeability, in which some primary porosity may remain because early formed clay coatings inhibited further compaction. The combination of residual primary porosity and significant amount of secondary porosity in the sandstones of the Cangfanggou Group may constitute moderate to good reservoirs. In contrast, the lacustrine fine-grained sandstones is characterized by clay authigenesis and zeolitization, in which the porosity was obliterated by the zeolites and extensive illitization; the lowstand fluvial channel sandstones in the basin margin areas are characterized by extensive calcite cementation which greatly reduced the porosity and permeability.This is the fifth paper in a series of papers published in this issue on Climatic and Tectonic Rhythms in Lake Deposits.     

A verification of some methods to determine the fluxes of momentum,sensible heat,and water vapour using standard deviation and structure parameter of scalar meteorological quantities

A set of micro-meteorological data collected over a horizontal, uniform terrain (the plain of La Crau, France) in June 1987 is analysed. Conditions were predominantly sunny and arid, while due to the Mistral the wind speed could exceed 10 m/s. Verification of several methods to evaluate surface fluxes of heat, momentum and water vapour from the standard deviation of temperature, wind and specific humidity is presented. Also, a similar approach using the structure parameter of temperature is considered. These methods are all based on Monin-Obukhov (M-O) similarity theory. It is found that the standard deviation of temperature, vertical and horizontal wind speed as well as the structure parameter for temperature behave according to M-O similarity. It is shown that the sensible heat flux and friction velocity can be determined from a fast response thermometer and a cup anemometer. Also, it appears that the analytic solution of the set of governing equations as derived by the first author yields good results. M-O theory does not appear to work for the standard deviation of specific humidity. This may be due to the relative importance of large eddies.     

Correlation methods in fingerprint detection studies

This investigation addresses two general issues regarding the role of pattern similarity statistics in greenhouse warming detection studies: normalization, and the relative merits of centered versus uncentered statistics. A pattern correlation statistic is used to search for the greenhouse warming signals predicted by five different models in the observed records of land and ocean surface temperature changes. Two forms of this statistic were computed: R (t), which makes use of nonnormalized data, and (t), which employs point-wise normalized data in order to focus the search on regions where the signal-to-noise ratio is large. While there are no trends in the R (t) time series, the time series of (t) show large positive trends. However, it is not possible to infer from the (t) results that the observed pattern of temperature change is, in fact, becoming increasingly similar to the model-predicted signal. This is because point-wise normalization of the observed and simulated mean change fields by a single common field introduces a common factor effect, which means that the quantities being compared should show some similarity a priori. This does not necessarily make normalization inapplicable, because the detection test involves seeking a trend in the similarity statistic. We show, however, that trends in (t) must arise almost completely from the observed data, and cannot be an indicator of increasing observed data/signal similarity. We also compare the information provided by centered statistics such as R(t) and the uncentered C(t) statistic introduced by Barnett. We show that C(t) may be expressed as the weighted sum of two terms, one proportional to R(t) and the other proportional to the observed spatial mean. For near-surface temperatures, the spatial average term dominates over the R(t) term. In this case the use of C(t) is equivalent to the use of spatial-mean temperature. We conclude that at present, the most informative pattern correlation statistic for detection purposes is R(t), the standard product-moment correlation coefficient between the observed and model fields. Our failure to find meaningful trends in R(t) may be due to the fact that the signal is being obscured by the background noise of natural variability, and/or because of incorrect model signals or sensitivities.     

Kinetics of peptide hydrolysis and amino acid decomposition at high temperature

Dipeptide hydrolysis and amino acid decomposition appear to follow a first-order rate law. The hydrolysis rate increases exponentially with increasing temperature in aqueous solution at both 265 atm and water steam pressures over the temperature range of 100 to 220 degrees C. Dipeptide hydrolysis has a lower apparent activation energy at 265 atm (44.1 KJ/mol) than at water steam pressure (98.9 KJ/mol). At lower temperatures (<200-220 degrees C), the rate of peptide bond hydrolysis is faster at 265 atm than at water steam pressure. At higher temperatures (>200-220 degrees C), however, peptide bond hydrolysis is slower at 265 atm than at water steam pressure. In aqueous solution, amino acid decomposition rates also increase exponentially with increasing temperature. Amino acid decomposition rates are much higher at 265 atm than at water steam pressure over the entire temperature range investigated.     

Re-evaluation of lead isotopic data,southern Massif Central,France

Three independent Pb isotope homogenizing processes operating on large volumes of rock material during limited intervals in the Phanerozoic have been used to define a unique evolutionary curve for rock and ore lead isotopic compositions of the southern Massif Central, France. The model is

Multiple Enrichment Processes and their Relationships in the Subcrustal Lithosphere Beneath the Eifel (Germany)

Three types of enrichment processes may be distinguished inspinel peridotite mantle xenoliths from the West Eifel (Germany):

1. Enrichmentof light rare earth elements (LREE) occurs in wholerocks andclinopyroxenes in conjunction with the formation ofTi-pooramphiboles (<0•5%) in a low-tempetature suite(900C).
2. Enrichment in high field strength elements (HFSE; Ti and Hf)is associated with strong zoning of TiO₂ in amphibole adjacentto mica hornblendite veins. A reheating from 900 to 1050C associatedwith this vein formation is reflected by the zoning profilesin orthopyroxenes with Ca, Al, and Cr increasing from core torim.
3. Moderate enrichment of LREE without amphibole formationin ahigh-temperature suite (1125C) is observed at the contactofperidotites to pyroxenite veins yielding the same temperature.
4. Based on geochemical and isotopic evidence, enrichment process(1) is inferred to be due to interaction of peridotites fromthe subcrustal lithosphere with low-density fluids. Process(2) represents a subsequent interaction of amphibole-bearingperidotites formed during the first process with basic meltsmoving through a system of cross-cutting dykes and veins. Processes(2) and (3) are linked to the Quaternary West Eifel volcanism.Geothermobarometry of the xenoliths shows that these processesare related to different depth regimes of the lower lithosphere.

     

Stratiform and vein U,Mo and Cu mineralization in the Novoveská Huta area,CSFR

U-Mo and Cu mineralization occurs in horizons as well as in veins in the Permian formations near Novoveská Huta. Ore mineralization is represented by uraninite, U-Ti oxides, coffinite, molybdenite, chalcopyrite, tennantite and pyrite. The isotopic composition of S and C displays a larger variability in the stratiform ores (³⁴S from –32.7 to +2.7 and ¹³C from –27.1 to — 0.5) These data suggest mixing of meteoric solutions with fluids of volcanic origin and a complex history. There is a narrower range of ³⁴S from –18.8 to –4.6 and ¹³C from –6.3 to –2.5% in quartz-carbonate veins with Cu mineralization suggesting a deep source of ore-bearing solutions. The Permian volcanics were a significant source of ore elements.Their contents of U, Mo, Cu and Y are from two to eight times higher than in sedimentary rocks. Accumulations of ore elements in the horizons were formed by the reduction and adsorption processes 240 ± 30 Ma ago according to U-Pb isotopic dating. Due to Alpine tectonism, these low-grade ores (U<0.1 wt%) were remobilized and higher-grade U-Mo ores (U>0.1 wt%) were formed 130 ± 20 Ma ago at temperatures ranging from 110 to 120° C, according to fluid inclusions. Younger veins with Cu mineralization were formed 115 ± 10 Ma according to the model age of Pb at temperatures ranging from 95 to 190°C.     

Cu 2p absorption spectroscopy as a probe for the site occupancy of (ZnxCu1−x)WO4 solid solution

The solid solution sanmartinite (ZnWO₄)—cuproscheelite (CuWO₄) has been studied using Cu 2p X-ray absorption spectroscopy. While a single L₃ absorption peak is observed for CuWO₄, two distinct L₃ absorption peaks with a separation of ～0.8 eV are observed for the intermediate samples in the solid solution. The two peaks represent distinct Cu sites: one with all CuO₆ next nearest neighbours in the (Cu,Zn)O₆ chains, another having at least one ZnO₆ next nearest neighbour. Both sites show a linear increase in covalency as a function of increasing Cu-content. The relative intensities of the two absorption peaks is dependent upon the Cu-content and has been used to model the site occupancies. The results reveal that the local structural effects can be associated with a composition-dependent structural phase transition from P2/c (ZnWO₄) to P $\bar 1$ (CuWO₄). Deviations from a single-site model are explained in terms of the local environments, and evidence for site preferences and local clustering are explored.