A B-spline based higher order panel method for analysis of steady flow around marine propellers

A higher order panel method based on B-spline representation for both the geometry and the solution is developed for the analysis of steady flow around marine propellers. The self-influence functions due to the normal dipole and the source are desingularized through the quadratic transformation, and then shown to be evaluated using conventional numerical quadrature. By selecting a proper order for numerical quadrature, the accuracy of the present method can be increased to the machine limit. The far- and near-field influences are shown to be evaluated based on the same far-field approximation, but the near-field solution requires subdividing the panels into smaller subpanels continuously, which can be effectively implemented due to the B-spline representation of the geometry. A null pressure jump Kutta condition at the trailing edge is found to be effective in stabilizing the solution process and in predicting the correct solution. Numerical experiments indicate that the present method is robust and predicts the pressure distribution on the blade surface, including very close to the tip and trailing edge regions, with far fewer panels than existing low-order panel methods.     

气溶胶光学厚度的时空变化

在大气中气溶胶微粒是一种重要的大气微量成分。气溶胶光学厚度也是大气校正所需的重要大气参数，同时也是海洋水色卫星主要的数据产品。由于气溶胶光学厚度的时空变化较大，所以如何准确获取大气校正和卫星数据产品真实性检验所需的气溶胶光学厚度则是至关重要的。在简述气溶胶光学性质的基础上，并结合2002年6月HY—1南海实验数据来阐述现场气溶胶光学厚度的准确获取。     

3D gravity modelling for Anyongbok Seamount in the East Sea

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.     

Experimental studies on the slowly varying drift motion of a berthed container ship model

The effects of free-surface waves on the floating structures are of great importance in the offshore industry. Among the six degrees of motions of a surface ship the absence of restoring forces in surge, sway and yaw led to critical situations for moored ships in the recent times. The order of forces in horizontal plane and their exciting frequencies are matters of interest. The resonance with the presence of moored chains led to many accidents in the recent past. The lines in dry conditions may not give good damping and in wet condition they may trigger the system to chaotic motions and jumps. Two different loading conditions of a container ship model are tested with waves in laboratory conditions in two different drafts. The mooring lines are chosen as per scale law and the energy under the response spectrum is determined from the plots. The results give new insights into the movement of a berthed ships subjected to waves. Response of the moored ship to different loading conditions in different water depths are discussed in this paper. The paper gives the order of energy due to first-order and slowly varying movement of a berthed container model in a towing tank.     

How are large western hemisphere warm pools formed?

During the boreal summer the Western Hemisphere warm pool (WHWP) stretches from the eastern North Pacific to the tropical North Atlantic and is a key feature of the climate of the Americas and Africa. In the summers following nine El Niño events during 1950–2000, there have been five instances of extraordinarily large warm pools averaging about twice the climatological annual size. These large warm pools have induced a strengthened divergent circulation aloft and have been associated with rainfall anomalies throughout the western hemisphere tropics and subtropics and with more frequent hurricanes. However, following four other El Niño events large warm pools did not develop, such that the mere existence of El Niño during the boreal winter does not provide the basis for predicting an anomalously large warm pool the following summer.In this paper, we find consistency with the hypothesis that large warm pools result from an anomalous divergent circulation forced by sea surface temperature (SST) anomalies in the Pacific, the so-called atmospheric bridge. We also find significant explanations for why large warm pools do not always develop. If the El Niño event ends early in the eastern Pacific, the Pacific warm anomaly lacks the persistence needed to force the atmospheric bridge and the Atlantic portion of the warm pool remains normal. If SST anomalies in the eastern Pacific do not last much beyond February of the following year, then the eastern North Pacific portion of the warm pool remains normal. The overall strength of the Pacific El Niño does not appear to be a critical factor. We also find that when conditions favor a developing atmospheric bridge and the winter atmosphere over the North Atlantic conforms to a negative North Atlantic Oscillation (NAO) pattern (as in 1957–58 and 1968–69), the forcing is reinforced and the warm pool is stronger. On the other hand, if a positive NAO pattern develops the warm pool may remain normal even if other circumstances favor the atmospheric bridge, as in 1991–92. Finally, we could find little evidence that interactions internal to the tropical Atlantic are likely to mitigate for or against the formation of the largest warm pools, although they may affect smaller warm pool fluctuations or the warm pool persistence.     

Formation and distribution of manganese nodule deposit in the northwestern margin of Clarion-Clipperton fracture zones,northeast equatorial Pacific

In the northwestern margin of the Clarion and Clipperton fracture zones, manganese nodules are latitudinally variable in character, resulting from the progressive (re)generation of nodules since the Oligocene as the Pacific Plate migrates northwestward beneath the equatorial production zone. Complemented by the surface water productivity, bottom current activities have concentrated nodules in the Oligocene to Miocene siliceous clay. Resedimentation processes on nodules form three types of nodules with concentric structures and 10 Å-manganaterich bottoms, by periodically causing the diagenetic growth of nodules within the topmost sediment layer.     

Chronic sublethal effects of the water soluble fractions of no. 2 fuel oils on the marine isopod, Sphaeroma quadridentatum

Two series of experiments were carried out to assess the long-term effects of the water soluble fractions (WSF) of fuel oils on the marine isopod, Sphaeroma quadridentatum. In one experiment, juvenile isopods (one month old) were exposed to sublethal concentrations (0·1% to 15% WSF) of a fuel oil (Baytown, Exxon) at room temperatures of 24 ± 1–6°C for nine months. These isopods survived to maturity and reproduced. However, growth rate was adversely affected at concentration ≥ 3% WSF and fecundity was depressed at concentrations ≥ 1% WSF. Survival of offspring in clean seawater was dependent to a large extent on the history of the previous generation. Offspring from groups exposed to ≥ 1% WSF experienced high mortality (> 70% within five weeks) even in clean seawater. This may imply that a population of Sphaeroma exposed to WSF as low as 0·2 ppm may eventually disappear, although animals can grow to maturity and reproduce at concentrations < 3 ppm.In another experiment, adult Sphaeroma (three months old) were subjected to the WSFs of four fuel oils (Baton Rouge, Baytown, Montana and New Jersey) for one month. Fecundity was depressed at a concentration > 15% WSF, regardless of the kind of fuel oil. On the other hand, the number of young produced bythe surviving females varied with the type of fuel oil for the same level of WSF. This may be attributed to different relative amounts of toxic components present in the WSF.     

Nocdap results: On the relationship of extreme waves and currents for design of offshore structures

Simultaneous wind, wave, and current data during 21 storms spanning four winters at Tromsøflaket (230 m depth) were analysed to determine joint probabilities of occurrence. Waves were measured with a Waverider Buoy, winds with a recording anemometer onboard a vessel and currents at up to five depths with Aandera RCM-4 current meters. Measured currents were filtered to separate tidal currents from residual currents. In most of the statistical analyses, the actual current profiles were replaced with a simplified “equivalent” profile (constant above 50 m depth) whose magnitude was chosen to give the same drag load on a single pile as the actual profile when both profiles were combined with wave orbital velocities. The data suggest that the equivalent current is weakly correlated with the wave height. Within the range of the data analysed, an in-line equivalent residual current of 30 cm sec⁻¹ is adequate for design drag force calculations.The data presented here are used to illustrate a procedure for data analysis and are not suitable for use as design criteria.     

五种植物提取液的抗鱼病菌和抗鱼病毒效应(英文)

本文旨在探索用廉价的野生植物防治鱼病。所用的植物有牛繁缕(Stellaria aqu-atica),双花凤仙(Impatiens biflora),夜来香(Oenothera biennis),艾草(Artem-isia vulgaris)和忍冬(Lonicera japonica)。用作试验的鱼病菌共13种(18个菌株),分属于气单孢菌属、假单孢菌属、爱德华氏菌属、耶尔森氏菌属、弧菌属。所用的鱼病毒为传染性胰脏坏死病毒IPNV,传染性造血组织坏死病毒IHNV。上述病原微生物均获自美国马里兰大学微生物系。实验结果表明,五种植物提取液均有不同程度的抗鱼病菌作用,其中以牛繁缕的抗菌谱最广,作用力最强。忍冬、艾草、牛繁缕有抗鱼病毒作用。其中以忍冬的效果最好,它能抑制IPNV和IHNV。而艾草和牛繁缕只能抑制IHNV。     

Design of Mooring System for Oil Storage Vessels

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab