海带雌性原生质体的分离与培养

于1993年1月 - 1993年4月，为了制备遗传性纯一的基因工程受体，用酶法从海带雌配子体单性生殖系分离雌性单倍体原生质体。从皱纹盘鲍消化腺及消化器官提取出鲍酶，在25°C下、1％（W／V）的鲍酶与2％（W／V）的纤维素酶（Onozuka R－10）合用能有效解离单细胞和原生质体。海带雌性原生质体经2d培养再生了细胞壁。     

Static Analysis of Collision Strength of Offshore Platform

In this paper a numerical analysis method combining FEM incemental technique with limit analysis concept is proposed for the study of the static strength of offshore platform in collision. Large deformation and plasticity are accounted for and the limit yield surface expressed by generalized stress for a tubular section is derived. The modified stiffness matrix of space beam element is formulated by Plastic Node Method. The buckling behavior of beam columns can also be taken into account. It can trace the generation of plastic hinges during loading and finally the ultimate strength of offshore platform against collision is obtained.     

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

Artificial upwelling induced by ocean currents —Theory and experiment

A submerged apparatus, which consists of a buoy, several horizontal contraction and expansion tubes (Venturi-type tubes) and a long pipe, is expected to be used to pump the subsurface sea-water (200–300 meter depth) containing abundant nutrients to surface layer (50–100 m) by the dynamic of ocean currents. i.e. an artificial upwelling without energy cost. A preliminary experiment and analysis are undertaken and shows that the capacity of pumping the nutrient-rich sea-water is worth to build a pilot prototype model.     

Underice Operation of SJT-5 ROV

- The authors have used a low-cost ROV of observation type for underice surveying of the Nen-Jiang Cross-river oil pipe line in the Da Qing oil field. The operation method, process and the safety measures for severe cold areas are presented. The fruitful tries and experience may be useful to ROV operators in severe cold areas.     

黄骅电厂取水河段取水特性的数模与物模研究

本文采用数值模拟与物模试验相结合的研究方法，详细地研究了黄骅电厂一、二、三期工程的取水特性。结果表明，现有河道只能满足电厂一期工程的取水需求；若将现有河道进行适当开挖，可以满足电厂三期取水需要。     

南黄海自生黄铁矿成因及其环境指示意义

样品为１９８９年采自南黄海，利用显微镜，电子显微镜，电子探针和化学分析方法，对自生黄铁矿的形态，成份和同位素特征进行研究，在此基础上就其成因与形成环境的关系进行初步探讨。研究结果表明，自生黄铁矿集合体形态可以分为聚莓，单莓和细粒３种，霉体特征的形态是早期成岩作用阶段沉积物随机堆积的结果，可以作了沉积成因黄铁矿的形态标型黄铁矿微量成份特征显示其沉积成因，同时亦表现对泥质沉积物地球化学背景值的继承性，     

Hydroelastic Analysis of Very Large Floating Structures Using Plate Green Functions

1 .IntroductionRecentlygreatinteresthasbeenshowninthedevelopmentofverylargefloatingstructuressuchasMegaFloatofJapan (Isobe ,1 999)andMOBofUSA (Remmers ,1 999) .Owingtotheirextremelargesizeandgreatflexibility ,thecouplingbetweenthestructuraldeformationandfluidmotionissignifi cant.Thisisatypicalproblemofhydroelasticity .Efficientandaccurateestimationofthehydroelasticresponseofverylargefloatingstructuresinwavesisveryimportantfordesign .Manymethodshavebeenproposedinliteratureforthepredictiono…     

钝顶螺旋藻部分原生质体及单细胞的制备与培养

于1992年1月-1994年4月，进行超声波处理方法制备钝顶螺旋藻部分原生质体以作为基因工程受体，以及制备单细胞用于固体平板克隆化培养的研究。研究结果表明：超声波以20kHz频率、15W功率作用30s，可使藻丝体断裂成15．0±1．6个细胞长度；延长作用时间，至2－6个细胞长度时，细胞壁结构遭到破坏，形成部分原生质体；继续作用，可形成少量原生质体和大量单细胞。断裂藻丝体、部分原生质体、单细胞以及原生质体均可涂布于固体培养基上再生或生长。以一定密度涂布单细胞与原生质体，能够形成彼此分开的单个克隆，可用于筛选及遗传分析。本文提供了一种节省溶菌酶的制备螺旋藻透性体的方法，超声波作用利于外源基因的导入，而涂布培养利于进一步的筛选和形成克隆。