Suspended sediment discharge in subsurface flow from the head hollow of a small forested watershed,northern Japan

Surface flow and suspended sediment discharge from the head hollow of the Jozankei Experimental Watershed in Hokkaido, northern Japan, were measured to clarify the implications of subsurface hydrology for soil movement. Subsurface discharges during the extremely large storms of 1993 to 1994 were measured in a V-notch weir installed at a natural spring near the bottom of the head hollow, and shallow groundwater levels were observed in the wells excavated in the hollow. Sediment samples whose particle size range from 0·001 to 0·1 mm were manually and automatically collected at 15 to 60 min intervals, by use of 1 or 21 polyethylene bottles. Maximum concentration and flux of suspended sediment during the storms preceded the peak discharge of subsurface flow by several hours. Neither the changes in concentration (mg l⁻¹) nor flux (mg s⁻¹) of suspended sediment coincided with those in subsurface discharge (l s⁻¹). Furthermore, sediment concentration was poorly correlated with the rate of change in subsurface discharge (l s⁻²) during the rising limb of the hydrograph. Suspended sediment flux during the acceleratory limb, however, was closely correlated with the rate of change in subsurface discharge. The relationship between suspended sediment flux and rate of change in subsurface discharge were in inverse proportion to initial subsurface discharge before the storm runoff and they represented rare seasonal variation. Subsurface hydraulic erosion and transport of suspended sediment resulting from changes in rate of change in subsurface discharge actively occur during the acceleratory rising limb of the hydrograph. Accordingly, subsurface hydraulic erosion during the acceleratory rising limb of the hydrograph can be physically understood by analysing suspended sediment flux associated with rate of change in subsurface discharge and initial subsurface discharge. © 1997 John Wiley & Sons, Ltd.     

Energy balance above a boreal coniferous forest: a difference in turbulent fluxes between snow‐covered and snow‐free canopies

To evaluate the interactive effects of snow and forest on turbulent fluxes between the forest surface and the atmosphere, the surface energy balance above a forest was measured by the eddy correlation method during the winter of 1995–1996. The forest was a young coniferous plantation comprised of spruce and fir. The study site, in Sapporo, northern Japan, had heavy and frequent snowfalls and the canopy was frequently covered with snow during the study period. A comparison of the observed energy balance above the forest for periods with and without a snow‐covered canopy and an analysis using a single‐source model gave the following results: during daytime when the canopy was covered with snow, the upward latent heat flux was large, about 80% of the net radiation, and the sensible heat flux was positive but small. On the other hand, during daytime when the canopy was dry and free from snow, the sensible heat flux was dominant and the latent heat flux was minor, about 10% of the net radiation. To explain this difference of energy partition between snow‐covered and snow‐free conditions, not only differences in temperature but also differences in the bulk transfer coefficients for latent heat flux were necessary in the model. Therefore, the high evaporation rate from the snow‐covered canopy can be attributed largely to the high moisture availability of the canopy surface. Evaporation from the forest during a 60‐day period in midwinter was estimated on a daily basis as net radiation minus sensible heat flux. The overall average evaporation during the 60‐day period was 0·6 mm day⁻¹, which is larger than that from open snow fields. Copyright © 1999 John Wiley & Sons, Ltd.     

Combining IR and X‐ray microtomography data sets: Application to Itokawa particles and to Paris meteorite

In the near future, a new generation of sample return missions (Hayabusa2, OSIRIS‐REx, MMX, etc.) will collect samples from small solar system bodies. To maximize the scientific outcome of laboratory studies and minimize the loss of precious extraterrestrial samples, an analytical sequence from less destructive to more destructive techniques needs to be established. In this work, we present a combined X‐ray and IR microtomography applied to five Itokawa particles and one fragment of the primitive carbonaceous chondrite Paris. We show that this analytical approach is able to provide a 3‐D physical and chemical characterization of individual extraterrestrial particles, using the measurement of their 3‐D structure and porosity, and the detection of mineral and organic phases, and their spatial co‐localization in 3‐D. We propose these techniques as an efficient first step in a multitechnique analytical sequence on microscopic samples collected by space missions.     

Visualising Crime Clusters in a Space‐time Cube: An Exploratory Data‐analysis Approach Using Space‐time Kernel Density Estimation and Scan Statistics

For an effective interpretation of spatio‐temporal patterns of crime clusters/hotspots, we explore the possibility of three‐dimensional mapping of crime events in a space‐time cube with the aid of space‐time variants of kernel density estimation and scan statistics. Using the crime occurrence dataset of snatch‐and‐run offences in Kyoto City from 2003 to 2004, we confirm that the proposed methodology enables simultaneous visualisation of the geographical extent and duration of crime clusters, by which stable and transient space‐time crime clusters can be intuitively differentiated. Also, the combined use of the two statistical techniques revealed temporal inter‐cluster associations showing that transient clusters alternatively appeared in a pair of hotspot regions, suggesting a new type of “displacement” phenomenon of crime. Highlighting the complementary aspects of the two space‐time statistical approaches, we conclude that combining these approaches in a space‐time cube display is particularly valuable for a spatio‐temporal exploratory data analysis of clusters to extract new knowledge of crime epidemiology from a data set of space‐time crime events.     

Mineralogical alteration of a type A CAI from Allende CV3 chondrite: Formation of secondary dmisteinbergite and its phase transition to anorthite

Dmisteinbergite, a hexagonal form of CaAl₂Si₂O₈, was found in a compact type A Ca-Al-rich inclusion (CAI) in the Allende CV3 chondrite. Scanning and transmission electron microscopic observations show that dmisteinbergite was always in contact with grossular and grossular was in contact with melilite. In addition, there is a crystallographic relationship between dmisteinbergite and anorthite. Based on the textural and crystallographic evidence, the following mineralogical alteration processes are proposed to have occurred in the CAI. (1) Melilite was replaced by grossular. High densities of vesicles in the grossular indicate that hydrogrossular might have been the primary alteration phase and dehydrated by later metamorphism. (2) Dmisteinbergite formed from (hydro)grossular through a reaction with Si-rich fluid. (3) Nano-sized minerals are formed within dmisteinbergite. (4) Dmisteinbergite was transformed to anorthite. (5) Both anorthite and dmisteinbergite were altered to nepheline. (6) Hydrogrossular was dehydrated to grossular. (Hydro)grossular, dmisteinbergite, anorthite, and nepheline in the CAI seem to have formed in the course of metasomatism that occurred in the Allende parent body. Except for the hydrogrossular dehydration, these reactions could have occurred at moderate temperature (200–250°C) in high pH fluids (pH 13–14) according to past experimental studies. Episodic changes in fluid composition seem to have occurred before reactions (2), (4), and (5), because these reactions were not completed before the next reaction started. Higher temperature is required for reactions (5) and (6) to occur. Our observation of the CAI suggests that it experienced multiple episodes of metasomatism as temperatures were rising in the Allende parent asteroid.     

Contribution of oceanic wave propagation from the tropical Pacific to asymmetry of the Ningaloo Niño/Niña

Climate Dynamics - Ningaloo Niño/Niña is the dominant mode of interannual variability of sea surface temperature (SST) in the southeastern Indian Ocean. According to previous studies,...     

Hayabusa‐returned sample curation in the Planetary Material Sample Curation Facility of JAXA

Abstract– The Planetary Material Sample Curation Facility of JAXA (PMSCF/JAXA) was established in Sagamihara, Kanagawa, Japan, to curate planetary material samples returned from space in conditions of minimum terrestrial contaminants. The performances for the curation of Hayabusa‐returned samples had been checked with a series of comprehensive tests and rehearsals. After the Hayabusa spacecraft had accomplished a round‐trip flight to asteroid 25143 Itokawa and returned its reentry capsule to the Earth in June 2010, the reentry capsule was brought back to the PMSCF/JAXA and was put to a series of processes to extract recovered samples from Itokawa. The particles recovered from the sample catcher were analyzed by electron microscope, given their ID, grouped into four categories, and preserved in dimples on quartz slide glasses. Some fraction of them has been distributed for initial analyses at NASA, and will be distributed for international announcement of opportunity (AO), but a certain fraction of them will be preserved in vacuum for future analyses.     

Investigation of cutting methods for small samples of Hayabusa and future sample return missions

We report the investigation of cutting methods for Hayabusa samples. The purpose of our study is to explore the possibility of applying multiple analyses to a single particle effectively. We investigated the cutting performance of a blade dicing saw, laser, focused ion beam (FIB), and physical breaking by microindenter. Cutting performance was examined by estimating the aspect ratio of the cut slit, i.e., depth over width of the slit. We also investigated the possible contamination and sample damage by cutting. The result of the investigation shows that we can cut the samples from <50 μm to 500 μm using those methods with aspect ratios from 10 to 20, although they would introduce some contamination or damage to the samples. Our investigations also provide an important basis for the analysis of samples obtained by future sample return missions.     

Mineralogy and petrography of C asteroid regolith: The Sutter's Mill CM meteorite

Based upon our characterization of three separate stones by electron and X‐ray beam analyses, computed X‐ray microtomography, Raman microspectrometry, and visible‐IR spectrometry, Sutter's Mill is a unique regolith breccia consisting mainly of various CM lithologies. Most samples resemble existing available CM2 chondrites, consisting of chondrules and calcium‐aluminum‐rich inclusion (CAI) set within phyllosilicate‐dominated matrix (mainly serpentine), pyrrhotite, pentlandite, tochilinite, and variable amounts of Ca‐Mg‐Fe carbonates. Some lithologies have witnessed sufficient thermal metamorphism to transform phyllosilicates into fine‐grained olivine, tochilinite into troilite, and destroy carbonates. One finely comminuted lithology contains xenolithic materials (enstatite, Fe‐Cr phosphides) suggesting impact of a reduced asteroid (E or M class) onto the main Sutter's Mill parent asteroid, which was probably a C class asteroid. One can use Sutter's Mill to help predict what will be found on the surfaces of C class asteroids such as Ceres and the target asteroids of the OSIRIS‐REx and Hayabusa 2 sample return missions (which will visit predominantly primitive asteroids). C class asteroid regolith may well contain a mixture of hydrated and thermally dehydrated indigenous materials as well as a significant admixture of exogenous material would be essential to the successful interpretation of mineralogical and bulk compositional data.     

Three‐dimensional microstructure of samples recovered from asteroid 25143 Itokawa: Comparison with LL5 and LL6 chondrite particles

In this study, the three‐dimensional (3‐D) microstructure of 48 Itokawa regolith particles was examined by synchrotron microtomography at SPring‐8 during the preliminary examination of Hayabusa samples. Moreover, the 3‐D microstructure of particles collected from two LL6 chondrites (Ensisheim and Kilabo meteorites) and an LL5 chondrite (Tuxtuac meteorite) was investigated by the same method for comparison. The modal abundances of minerals, especially olivine, bulk density, porosity, and grain size are similar in all samples, including voids and cracks. These results show that the Itokawa particles, which are surface materials from the S‐type asteroid Itokawa, are consistent with the LL chondrite materials in terms of not only elemental and isotopic composition of the minerals but also 3‐D microstructure. However, we could not determine whether the Itokawa particles are purely LL5, LL6, or a mixture of the two. No difference between the particles collected from Rooms A and B of the sample chamber, corresponding to the sampling sequence of the spacecraft's second and first touchdowns, respectively, was detected because of the statistically small amount of particles from Room B.