Evolution of borate minerals from contact metamorphic to hydrothermal stages: Ludwigite-group minerals and szaibélyite from the Vysoká – Zlatno skarn,Slovakia

Mineralogy and Petrology - Borate minerals of the ludwigite group (LGM) and szaibélyite in association with hydroxylclinohumite, clinochlore, a serpentine mineral, magnesian magnetite, spinel,...     

Observations of wave pump efficiency

Currently available data on wave pump efficiency is reviewed. The obtainable efficiency is an important consideration in the design of practical devices for the extraction of wave energy and the analysis of natural systems (e.g., coral flats and rip currents). We find that the peak efficiency is 0.5 for very steep (∼ 40–45°) ramps where the waves break over the top of the ramp. For flatter (< 30°) ramps, the breaking process is more gradual and the peak efficiency is less than 0.1. We have identified natural atoll lagoon systems where the flushing is wave driven and successfully modeled it as driven by a wave pump. The same is the case for rip currents. For both of these natural systems, the pump efficiency is around 0.035. In addition a numerical swash model is used to estimate wave pump efficiency and is seen to match the experimental results for natural systems or breaking wave scenario.     

Petrology of the Skien basaltic rocks,southwestern Oslo Region,Norway

The pile of Permian continental basaltic rocks near Skien has a minimum thickness of 1 500 m, dipping 40^g towards NE, consisting of several thin lava flows. Most flows are porphyric, though both tuffs and aphyric flows occur to a lesser extent. Amygdules are abundant and a characteristic feature. The flows in the lower 2/3 of the basalt pile are mainly classified as melanite-ankaramite; some in the middle part as melanite-nephelinite; and the upper 1/3 of the flows as basanite. The basaltic rocks evolved from an assumed olivine-nephelinitic magma at great depths principally by clinopyroxene crystal fractionation accompanied by later olivine and maybe melilite reactions at moderate pressure in minor shallower magma chambers.     

Modelling magnetization processes in single-and multi-domain rock samples using the preisach diagram

Summary The paper presents the results of identifying a model of the Preisach type for haematite grains of the single-domain as well as multi-domain size. Due to the phenomenological conception of the model, the relations between the parameters of the model and actual parameters are very complex, however, impressive accuracy and stability of the modified model indicate the need to resume studies of this problem. The model parameters also confirm the adequate properties of the vibrating-sample magnetometr (VSM) used and developed in our laboratories.     

The effect of methanogenesis on the geochemistry of low temperature water–Fe0–basalt reactions

Hydrogen gas produced in the subsurface from the hydration of mafic rocks is known to be a major energy source for chemolithotrophic life in extreme environments such as hydrothermal vents. The possibility that in situ anaerobic microorganisms present in the deep subsurface are sustained by low temperature H₂-generating water–rock reactions taking place around them is being investigated. Whether the growth and activity of H₂-utilizing microbes directly influences aqueous geochemistry, rates of mineral dissolution, and the chemical composition of the alteration products is also being quantitatively evaluated.To explore how microorganisms are affected by water–rock reactions, and how their activity may in turn affect reaction progress, laboratory experiments have been conducted to monitor the growth of a methanogenic Archaea in the presence of H_2(g) produced from low temperature water–Fe⁰–basalt reactions. In these systems, the conversion of Fe(II) to Fe(III) and subsequent hydrolysis of water is responsible for the production of H_2(g). To characterize key components of the geochemical system, time series measurements of H₂ and CH₄ gas concentrations, Fe and Si aqueous concentrations, and spatially resolved synchrotron-based analyses of microscale Fe distribution and speciation were conducted. Culture experiments were compared with an abiotic control to document changes in the geochemistry both in the presence and absence of the methanogen.In the control abiotic batch experiment, H₂ was continuously produced, until the headspace became saturated, while in the biotic experiments, microbial consumption of H₂ for methanogenesis draws H₂ down and produces CH₄. Purging the headspace gas reinitiates H₂ and CH₄ production in abiotic and culture experiments, respectively. Mass balance analysis of the amount of CH₄ produced suggests that the total H₂ production in microbial experiments does not exceed the abiotic experiment. Soluble Si concentrations, while buffered to relatively constant values, were higher in culture experiments than the abiotic control.Iron_(aq) concentrations appear to respond to perturbations of H₂ and CH₄ gas concentrations in both culture experiments and the abiotic control. A pulse of Fe preceded the rise in either H₂ or CH₄ production, and as the gas concentrations increased the Fe_(aq) decreased. Iron-bearing mineral assemblages change with increasing reaction time and mineral assemblages vary between culture experiments and the abiotic control. These geochemical trends suggest that there are different reaction paths between the culture experiments and the abiotic control.The hydration of mafic rocks is a common geologic reaction and one that has taken place on Earth for the majority of its history and is postulated to occur on Mars. These reactions are important because of their effect on the rheology and geochemistry of the ocean crust. While most often studied at temperatures of ～250 °C, this work suggests that at lower temperatures microorganisms may have a profound effect on what has long been thought to be solely an abiotic reaction, and may produce diagnostic mineral assemblages that will be preserved in the geological record.     

Tidal Marsh Restoration Design Affects Feedbacks Between Inundation and Elevation Change

Tidal marsh (re)creation on formerly embanked land is increasingly executed along estuaries and coasts in Europe and the USA, either by restoring complete or by reduced tidal exchange. Ecosystem functioning and services are largely affected by the hydro-geomorphologic development of these areas. For natural marshes, the latter is known to be steered by feedbacks between tidal inundation and sediment accretion, allowing marshes to reach and maintain an equilibrium elevation relative to the mean sea level. However, for marsh restoration sites, these feedbacks may be disturbed depending on the restoration design. This was investigated by comparing the inundation-elevation change feedbacks in a natural versus restoration site with reduced tidal exchange in the Scheldt estuary (Belgium). This study analyzes long-term (9 years) datasets on elevation change and tidal inundation properties to disentangle the different mechanisms behind this elevation-inundation feedback. Moreover, subsequent changes in sediment properties that may affect this feedback were explored. In the restoration area with reduced tidal exchange, we found a different elevation-inundation feedback than on natural marshes, which is a positive feedback on initially high sites (i.e., sediment accretion leads to increasing inundation, hence causing accelerating sediment accretion rates) and a gradual silting up of the whole area. Furthermore, there is evidence for the presence of a relict consolidated sediment layer. Consequently, shallow subsidence is less likely to occur. Although short-term ecological development of the tidal marsh was not impeded, long-term habitat development may be affected by the differences in hydro-geomorphological interactions. An increase of inundation frequency on the initially high sites may cause inhibition of habitat succession or even reversed succession. Over time, the climax state of the restoration area may be different compared to natural marshes. Moreover, sediment-related ecosystem services, such as nutrient and carbon burial, may be positively influenced because of continuing sedimentation, although flood water storage potential will decrease with increasing elevation. Depending on the restoration goals, ecosystem trajectories and delivery of ecosystem services can be controlled by adaptive management of the tidal volume entering the restoration area.     

Timing and mechanisms controlling evaporite diapirism on Ellef Ringnes Island,Canadian Arctic Archipelago

The Permo‐Carboniferous to Eocene Sverdrup Basin in Canada's Arctic Archipelago is strongly influenced by evaporite diapirism. However, salt structures within the basin have not been extensively investigated recently due to their remote location. This study includes the interpretation of legacy seismic reflection and borehole data to characterize the geometry of selected evaporite domes, and 1D backstripping of wells to investigate tectonic and sedimentary influences on diapirism. Extensional rift‐structures appear to have played a significant role in the formation of evaporite domes by triggering and directing salt movement. Diapirism was initiated by at least the Middle Triassic and continued to develop during the Mesozoic. Differential loading of salt on opposing east–west dome margins led to their present day asymmetric geometries. Diapir growth rates in the Mesozoic were closely linked to the rate of sedimentation and influenced by regional tectonism.     

Automatic Location of Swarm Earthquakes from Local Network Data

An advanced method of automated seismic phase picking and exact location and magnitude determination of swarm micro-earthquakes from local network data is presented. The phase picker is applied in two steps: first, S-wave groups are identified using a polarisation detector, and then corresponding P-wave groups are searched for. The times of maximum P- and S-amplitudes are then used as starting points for the determination of accurate P- and S-arrival times. The maximum S-wave amplitudes are utilised for determining local magnitudes. The whole procedure is checked by simultaneous preliminary hypocentre location providing estimates of local magnitudes and a compatibility check of the candidate P- and S-phases. The closest station to the earthquake cluster is used as a master, and the phase search at the remaining stations is governed by the P- and S-phases identified at the master station. Thanks to the use of apriori information on the approximate position of hypocentres, the procedure is also capable of picking the individual P- and S-phases of sequences of overlapping swarm events. The performance of the procedure was tested by comparison of the automatically and interactively created catalogues of the January 1997 NW-Bohemia micro-earthquake swarm. With stations located at epicentral distances between 0 and 20 km, the difference between hypocentre coordinates obtained by automatic and interactive processing did not exceed 80 m for 86% events. All events above magnitude 0.5 were identified, and the automatically determined polarity of first P-wave motion proved to be correct in 89% of them.     

Comparing threshold definition techniques for rainfall‐induced landslides: A national assessment using radar rainfall

Translational landslides and debris flows are often initiated during intense or prolonged rainfall. Empirical thresholds aim to classify the rain conditions that are commonly associated with landslide occurrence and therefore improve understating of these hazards and predictive ability. Objective techniques that are used to determine these thresholds are likely to be affected by the length of the rain record used, yet this is not routinely considered. Moreover, remotely sensed spatially continuous rainfall observations are under‐exploited. This study compares and evaluates the effect of rain record length on two objective threshold selection techniques in a national assessment of Scotland using weather radar data. Thresholds selected by ‘threat score’ are sensitive to rain record length whereas, in a first application to landslides, ‘optimal point’ (OP) thresholds prove relatively consistent. OP thresholds increase landslide detection and may therefore be applicable in early‐warning systems. Thresholds combining 1‐ and 12‐day antecedence variables best distinguish landslide initiation conditions and indicate that Scottish landslides may be initiated by lower rain accumulation and intensities than previously thought. © 2017 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.