Evolution of borate minerals from contact metamorphic to hydrothermal stages: Ludwigite-group minerals and szaibélyite from the Vysoká – Zlatno skarn,Slovakia

Mineralogy and Petrology - Borate minerals of the ludwigite group (LGM) and szaibélyite in association with hydroxylclinohumite, clinochlore, a serpentine mineral, magnesian magnetite, spinel,...     

Heat transfer coefficients of natural volcanic clasts

Heat transfer coefficients used in numerical simulations of volcanic eruptions are typically borrowed from industrial settings where the coefficients are well determined for non-permeable, machined (spherical) materials. Volcanic clasts, in contrast, are permeable and have irregular shapes. We performed a series of laboratory experiments to determine heat transfer coefficients for natural volcanic particles. We measured the surface and interior temperatures during cooling at wind speeds ranging from 0 to 10 m/s. We also measured the permeability and density of the particles. We find that the permeability of the particles has little effect on clast cooling. In the absence of any wind, heat loss occurs by free convection, and we find no relationship between the heat transfer coefficient and particle density. However, for non-zero Reynolds numbers (finite wind speed), the heat transfer coefficient decreases with increasing porosity. We obtain a correlation for the dimensionless heat loss, or Nusselt number, of the form Nu = 2 + aRe^1/2Pr^1/3 where a is a density dependent coefficient given by a = 0.00022ρ + 0.31, with ρ in kg/m³, and Re and Pr are the Reynolds number and Prandtl number, respectively. Compared with non-porous particles, heat transfer coefficients for natural pumice clasts are reduced by a factor of 2–3 for particles with similar Re. Numerical simulations show that this leads to an increase in depositional temperature by 50–90 °C.     

The Effect of Toluene-Substrate Concentration on Biological Clogging and Sloughing in Porous Media

One-dimensional flow experiments on biological clogging were carried out by biostimulating columns packed with glass beads, sterilized, and inoculated with toluene-utilizing bacteria. Biostimulation consisted of continuously injecting toluene at four concentrations (3.0 ± 0.9, 6.1 ± 0.8, 8.7 ± 1.6, and 11.3 ± 0.8 mg/L). The results of column flow experiments indicated that a threshold concentration of toluene exists below which the total biomass in the column can be kept at a steady-state level. The column cores were extruded and segmented to determine the biomass distribution throughout the column at clogging. Clogging resulted in a significant buildup of filamentous bacteria close to the inlet end. Based on the nucleotide sequence of 16S rRNA genes, the dominant filamentous bacteria were identified as Nocardia farcinica. A 235-d column experiment demonstrated that the clogging near injection points can be controlled by keeping the influent concentration of toluene below the threshold.     

The structural,geometric and volumetric changes of a polythermal Arctic glacier during a surge cycle: Comfortlessbreen,Svalbard

Various parameters of the most recent surge of the polythermal glacier Comfortlessbreen in northwest Svalbard, have been assessed through a combination of remote sensing and ground observations. Analysis of a digital elevation model time‐series shows a marked change in the geometry of the glacier from quiescence (1990 and earlier) into the late surge phase (2009). The transfer of 0.74 km³ of ice caused up to 80 m of surface drawdown in the reservoir area, above the equilibrium line, whilst ice built up in a spatially concentrated manner in the receiving zone, below the equilibrium line. A ramp of ice, c. 100 m above quiescent level, developed in the lower reaches of the glacier late in the surge. Also in the lower reaches of the glacier, structures attributable to the passage of a kinematic wave are identified and the migration of a surge front on the glacier is thus inferred. In a conceptual model, we consider that a bend in the valley, in which the glacier resides, and convergence with tributary glaciers, to be significant factors in the style of surge evolution. Their flow‐restrictive interference results in slow initial mass‐transfer and the growth of a surge front within 3–4 km of the terminus. Copyright © 2015 John Wiley & Sons, Ltd.     

Predicting reach‐specific properties of fluvial terraces to guide future fieldwork. A case study for the Late Quaternary River Allier (France) with the FLUVER2 model

Numerical models have not yet systematically been used to predict properties of fluvial terrace records in order to guide fieldwork and sampling. This paper explores the potential of the longitudinal profile model FLUVER2 to predict testable field properties of the relatively well‐studied, Late Quaternary Allier system in France. For the Allier terraces an overlapping ¹⁴C and U‐series chronology as well as a record of ¹⁰Be erosion rates exist. The FLUVER2 modelling exercise is focused on the last 50 ka of the upper Allier reach because for this location and period the constraints of the available dating techniques are tightest. A systematic calibration based on terrace occurrence and thicknesses was done using three internal parameters related to (1) the sediment erodibility; (2) the sediment transport distance; and (3) the sediment supply derived from the surrounding landscape. As external model inputs, the best available, reconstructed, tectonic, climatic and base‐level data were used. Calibrated model outputs demonstrate a plausible match with the existing fluvial record. Validation of model output was done by comparing the modelled and measured timing of aggradation and incision phases for the three locations. The modelled range of landscape erosion rates showed a reasonably good match with existing erosion rate estimates derived from ¹⁰Be measurements of fluvial sands. The quasi‐validated model simulation was subsequently used to make new testable predictions about the timing and location of aggradation and erosion phases for three locations along the Allier river. The validated simulations predict that along the Allier, reach‐specific dynamics of incision and aggradation, related to the variations in sediment supply by major tributaries, cause relevant differences in the local fluvial terrace stratigraphy. Copyright © 2016 John Wiley & Sons, Ltd.     

Recurrent mesoproterozoic continental magmatism in South-Central Norway

We report U–Pb dates and Lu–Hf isotope data, obtained by LAM-ICPMS, for zircons from metamorphic rocks of the Setesdalen valley, situated in the Telemark block south of the classic Telemark region of southern Norway. The samples include infracrustal rocks from the metamorphic basement, metaigneous rocks and metasediments from the Byglandsfjorden supracrustal cover sequence, and metaigneous rocks which intruded the whole succession. The main crustal evolution took place from 1,550–1,020 Ma, beginning with the emplacement of juvenile tonalitic melts; the contribution of older crustal material increased with time. Around 1,320 Ma, further addition of juvenile material occurred, involving both mafic and felsic melts, metamorphism and deformation. Acid magmas with high FeO*/MgO were intruded at 1,215 Ma, coinciding with underplating elsewhere in South Norway. The period starting at 1,215 Ma is represented by supracrustal rocks, principally metarhyolites with minor mafic material and immature sediments of the Byglandsfjorden Group. The crust generation processes ended with the intrusion of diorites and granodiorites at 1,030 Ma, late in the Sveconorwegian orogeny. Regional processes of metamorphism and deformation (around 1,290 and 1,000 Ma) can be related to the assembly of Rodinia. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Magnetic particles in atmospheric particulate matter collected at sites with different level of air pollution

Magnetic measurements of deposited atmospehric dust can serve as an additional parameter in assessing environmental pollution. This method is based on the assumption that atmospherically deposited particles contain significant portion of ferrimagnetic iron oxides of anthropogenic origin, which can be easily detected. Aim of this paper is to identify clearly magnetic fraction of daily samples of particulate matter less than 10 μm (PM10), routinely used for air quality assessment and monitoring. We used combination of thermomagnetic analyses and other physical and chemical methods, including scanning electron microscopy (SEM) and Mössbauer spectroscopy. Our results show that daily samples of PM10, collected at sites with different degree of atmospheric pollution, contain magnetite of spherical shape, which is presumably of industrial origin. Thus, magnetic methods can be applied directly to the same substances, which are used routinely in air quality assessment and monitoring.     

A late Pleistocene human presence at Huaca Prieta,Peru, and early Pacific Coastal adaptations

Archaeological excavations in deep pre-mound levels at Huaca Prieta in northern Peru have yielded new evidence of late Pleistocene cultural deposits that shed insights into the early human occupation of the Pacific coast of South America. Radiocarbon dates place this occupation between ~ 14,200 and 13,300 cal yr BP. The cultural evidence shares certain basic technological and subsistence traits, including maritime resources and simple flake tools, with previously discovered late Pleistocene sites along the Pacific coast of Peru and Chile. The results help to expand our knowledge of early maritime societies and human adaption to changing coastal environments.     

Experimental Study of Undrained Shear Strength of Silty Sand: Effect of Fines and Gradation

Two strong earthquakes occurred in the region of Chlef (north western part of Algeria) during the last century. From the geological context, there were several great masses of sandy soil ejections on to the ground surface level and severe damages to civil and hydraulic structures. These damages were due to the soil liquefaction phenomenon. The objective of this laboratory investigation is to study the effect of low plastic fines and gradation characteristics on the undrained shear strength (liquefaction resistance) response of sand-silt mixture samples. For this purpose, a series of undrained monotonic triaxial tests were carried out on reconstituted saturated silty sand samples with different fines content ranging from 0 to 50?% at two initial relative densities (D_r?=?20 and 91?%). The initial confining pressure was kept at 100?kPa. The evaluation of the data indicates that the undrained shear strength at the peak (q_peak) can be correlated to the undrained residual strength (S_us), the excess pore pressure (Δu), the fines content (F_c) and the intergranular void ratio (e_s). The test results indicate also that the undrained shear strength at the peak decreases with the increment of the coefficient of uniformity and fines content as well as with the decrement of the mean grain size in the range of 0–50?% fines content for both relative densities (D_r?=?20 and 91?%).