The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.     

Lower crustal granulite xenoliths from the Pannonian Basin,Hungary, Part 2: Sr–Nd–Pb–Hf and O isotope evidence for formation of continental lower crust by tectonic emplacement of oceanic crust

Mafic granulite xenoliths from the lower crust of the Pannonian Basin are dominated by LREE-depleted bulk-rock compositions. Many of these have MORB-like ¹⁴³Nd/¹⁴⁴Nd but ⁸⁷Sr/⁸⁶Sr is elevated relative to most MORBs. Their '¹⁸O values cover a wide range from +3.8 to +9.5‰. A group of LREE-enriched mafic granulites have higher ⁸⁷Sr/⁸⁶Sr (0.704-0.708) and lower ¹⁴³Nd/¹⁴⁴Nd (0.5128-0.5124), with higher '¹⁸O values on average (+7.8 to +10.6‰) than the LREE-depleted granulites. The LREE-enriched granulites are, however, isotopically similar to newly discovered metasedimentary granulite xenoliths. A sublinear correlation in )Hf-)Nd isotope space has a shallower slope than the crust-mantle array, with the metasedimentary rocks forming the low )Hf end member; the radiogenic end is restricted to the LREE-depleted granulites and these overlap the field of MORB. Pb isotopes for the LREE-depleted samples are less radiogenic on average than those of the LREE-enriched and metasedimentary xenoliths, and metasedimentary granulites have consistently higher ²⁰⁸Pb/²⁰⁴Pb. The wide range in '¹⁸O over a restricted range in Nd and Sr isotope values, in combination with the predominance of LREE-depleted trace-element compositions, is consistent with an origin as a package of hydrothermally altered oceanic crust. The existence of '¹⁸O values lower than average MORB and/or mantle peridotite requires that at least some of these rocks were hydrothermally altered at high temperature, presumably in the oceanic lower crust. The low ¹⁴³Nd/¹⁴⁴Nd of the LREE-enriched mafic granulites cannot be explained by simple mixing between a LREE-depleted melt and an enriched component, represented by the recovered metasediments. Instead, we interpret these rocks as the metamorphic equivalent of the shallowest levels of the ocean crust where pillow basalts are intimately intercalated with oceanic sediments. A possible model is accretion of oceanic crustal slices during subduction and convergence, followed by high-grade metamorphism during the Alpine orogeny.     

Preliminary Rock-Slope-Susceptibility Assessment Using GIS and the SMR Classification

This paper aims to examine the impact of large-scale structuraladjustments (like the Greater Dhaka Flood Protection Project, GDFPP) on local living environment.It focuses the importance of environmental factors in flood hazard mitigation, and examines theenvironmental attitudes of the floodplain residents arising from the large-scale structural adjustments.Based on `perceived natural hazard research perspectives', this paper examines: (i) the reasons for persistentfloodplain occupation, and (ii) the importance of environmental factors in the choice, motivations and decision-makingof floodplain residents.This research used data collected from 300 households situated inthe eastern part of Dhaka. The face-to-face household survey data provided individuals' responses to a structuredquestionnaire on hazards and environment. Survey concerned urban floodplains, and looked fordata on housing, household characteristics, and residents' attitudes. Results of interview surveys wereused to: (i) explore the reasons of floodplain occupation, and (ii) residents' attitudes to tolerable levelof flood risk and willingness to accept environmental change resulting from the proposed structural embankments inthe eastern perimeter of Dhaka City, Bangladesh.Findings revealed that floodplain occupation (by theindividuals' decision-making) was a result of overall reaction to the Government's structuraladjustment policies that resulted from institutional, locational and socio-economic factors. The attitude survey results provided residents' perception to hazards and environment to be dependenton the socio-economic factors – but in a complex manner, many factors are interrelated.In addition to support for structural embankments, the study sample displayed a common concernand widespread environmental awareness. In terms of any `trade-off' between thebenefits (resources) from the embankments and costs (hazards) due to the detrimental impact on environment, the residents of Dhaka, despite some concern forsacrificing embankments for environment, tended to show a generalconsensus for embankments.     

Surface-water quality for the Salí River watershed in NW Argentina

Spatial and temporal variations of Na, Mg, Si, K, Ca, SO₄^2-, Cl^-, HCO₃^-, Ag, Al, As, Au, B, Ba, Be, Bi, Br, Ce, Cd, Co, Cr, Cs, Cu, Dy, Er, Eu, F, Fe, Ga, Ge, Gd, Hf, Hg, Ho, I, La, Li, Mn, Mo, Nb, Nd, Ni, P, Pb, Pr, Rb, Sb, Sm, Sn, Sr, Ta, Tb, Te, Th, Ti, Tl, U, V, W, Y, Yb, Zn, and Zr were monitored through 37 sampling stations to determine the main aspects influencing the surface-water quality in the Salí River watershed (Tucumán Province, NW Argentina). The influence of the regional geological setting on water chemistry allows to distinguish three sub-basins. The interaction with sedimentary rocks was found to be dominant in the northern and central-eastern sub-basin as well as in the southern sub-basin, whereas the metamorphic-granitic basement of the Pampean Ranges was noted in the central sub-basin. In addition, anthropogenic activities affect the spatial variation of K, P, Mn, Rb, and Pb as well as dissolved oxygen concentrations and Eh. Temporal water-quality variation is related to the spatial distribution of precipitation and to the seasonal character of the main local industries (sugar cane, alcohol, citrus), increasing P and K concentrations and decreasing dissolved oxygen concentration and Eh in winter. Cl^-, Na, SO₄^2-, Al, As, B, Fe, Mn, Se and U concentrations exceed the regulated drinking-water thresholds at several sampling stations.     

Separate lead isotope analyses of leachate and residue rock fractions: implications for metal source tracing in ore deposit studies

Separate lead isotope analyses of leachate and residue fractions are applied to a broad spectrum of rocks commonly investigated in metallogenic studies. Resulting data highlight a systematic behavior of leachate and residue fractions with respect to lead isotope compositions, which essentially depends on the mineralogical composition of the rock. Granitoid and high-grade metamorphic rocks have residue compositions virtually identical to common lead. In contrast, low-grade metasedimentary rocks may have residue compositions swamped by radiogenic lead of leach-resistant zircons. Mafic magmatic rocks have residues that are often more radiogenic than leachates, depending on the ratio of leach-refractory zircons to common lead in the residual fraction of these rocks. Separate leachate and residue analyses of source rocks provide two lead isotope end members whose mixture may represent lead with the appropriate ore fluid composition. Our leaching experiments indicate that hot acid solutions (and by inference hydrothermal fluids) preferentially leach radiogenic lead from medium- to high-grade metamorphic and granitoid rocks, whereas they preferentially leach common lead from low-grade metasedimentary and mafic magmatic rocks. The method presented in this study provides a reliable alternative to other methods (i.e., age-correction of bulk-rock compositions) for the determination of the common lead signature of felsic to intermediate magmatic rocks. This may be preferable to age-corrected bulk-rock analyses, where ages to apply for corrections of bulk-rock data are not known or where moderately to highly altered rocks must be used. Case studies of orogenic gold and MVT districts of Peru (Pataz and San Vicente, respectively) show that separate leachate and residue lead isotope analyses carried out systematically on whole rocks allow a more thorough evaluation of metal source reservoirs than does the standard method of age-corrected or uncorrected bulk-rock analyses.     

Predictive GIS-Based Model of Rockfall Activity in Mountain Cliffs

Rockfall susceptibility has been analysed in mountain cliffs of the Cantabrian Range, North Spain. The main aim of this analysis has been to build a predictive model of rockfall activity from a low number of environmental and geological variables. The rockfall activity has been quantified in a GIS. The cartographic information used shows the spatial distribution of all the recent talus screes as well as their associated source areas in the rock-slopes. The area relation At/Ar (recent talus scree polygon/source basins) in the rock slopes has been used as the rockfall activity indicator. This relation has been validated in 50 pilot rock-slopes and compared with the relation number of recent rock fragments/source basin, obtained from field work. The environmental factors causing rockfall depend on the rock slope situation, and these are: altitude and sun radiation on the rock cliff. The geological factors considered are: lithology, relative position of the main discontinuities with respect to the topographic surface and two morphologic parameters: the roughness and slope gradient. A logistic regression analysis has been applied to a population of 442 limestone and quartzite rock cliffs. The dependent variable is the rockfall activity indicator, which allows the definition of two classes of rock cliff units: low and high activity. The independent variables are altitude, sun radiation (equinox radiation, summer solstice radiation, winter solstice radiation), slope roughness, slope gradient,anisotropy and lithology. Results suggest that it is possible tobuild a valid cartographic predictive model for rockfall activity in mountain rock cliffs from a limited number of easily obtainable variables. The method is especially applicable in massive rock slopes or in regions with uniform rock mass characteristics.     

Surface effects of triggered fault slip on Reykjanes Peninsula, SW Iceland

Three large earthquakes (M_w>4.5) were triggered within 5 min, 85 km west of a M_w 6.5 earthquake in the South Iceland Seismic Zone (SISZ). We report on surface effects of these triggered earthquakes, which include fresh rupture, widespread rockfall, disrupted rockslides and block slides. Field data confirm that the earthquakes occurred along N-striking right-lateral strike-slip faults. Field data also support the conclusion from modeling of InSAR data that deformation from the second triggered event was more significant than for the other two. A major hydrological effect was the draining of water through an open fissure on a lake bed, lowering the lake level by greater than 4 m. Field relationships suggest that a component of aseismic slip could have been facilitated by water draining into the fault zone.     

Layer parallel shortening in salt-detached folds: constraint on cross-section restoration

Cleavage-fissility perpendicular to bedding is a common feature in the external part of fold-and-thrust belts. Three techniques were used to determine the internal distortion in the frontal Southern Pyrenees: the analysis of strain markers such as burrows and rain drops, the measurement of fissility, and the measurement of anisotropy of magnetic susceptibility (AMS). The comparison of the three techniques showed a good fit although they differ in sensitivity to penetrative strain variations in the range of deformation values explored in the study case. On the regional scale, the values of layer parallel shortening (LPS) derived from the markers analysis are very constant and account for 16–23% of shortening. These values are two to three times larger than the shortening values calculated from the restoration of the macroscopic scale structures and indicate a good decoupling above the Cardona salt Formation. This study permitted an accurate restoration of the low-amplitude el Guix detached anticline.     

Validation of Landslide Susceptibility Maps; Examples and Applications from a Case Study in Northern Spain

A procedure for validating landslide susceptibility maps wasapplied in a study area in northern Spain and the results obtained compared. Validationwas used to carry out sensitivity analysis for individual variables and combinationsof variables. The validity of different map-making methods was tested, as well as theutility of different types of Favourability Functions. The results obtained show thatvalidation is essential to determine the predictive value of susceptibility maps. Italso helps to better select the most suitable function and significant variables, thus improving the efficiency of the mapping process. Validation based on a temporal strategy makes it possible to derive hazard maps from susceptibility maps.     

Tracing the flow of organic matter from primary producers to filter feeders in Ria Formosa lagoon, Southern Portugal

The flow of organic matter along the main navigation channel of Ria Formosa, Portugal, was assessed using determinations of suspended particulate matter (SPM), particulate organic matter (POM), and chlorophyll a (chla) concentrations in conjunction with stable isotope values of primary producers, particulate matter, and two filter feeders. SPM in the lagoon is dominated by inorganic particles comprising 80% of total weight with organic matter averaging about 20%. The algal component of the POM averaged about 5% with the remainder comprised of detritus. The δ¹³C values of primary producers ranged from ?9.1‰ in the intertidal seagrassZostera noltii to ?30.7‰ in the red seaweedBostrychia scorpioides revealing underlying differences in the mechanisms of carbon uptake. The δ¹³C value ofB. scorpioides, which develops entangled on the salt marsh speciesSpartina maritima, suggests that its main source of inorganic carbon is atmospheric CO₂. The δ¹³C values of the high marsh macrophyteSarcocornia perennis significantly increased with distance from the ocean while δ¹³C values ofZ. noltii decreased, probably because higher decomposition of organic matter at inner stations lowers the δ¹³CO₂ value in the water. The δ¹⁵N values of Ulvales, seagrasses, and marsh plants significantly increased from outer stations to inner stations. This increase may be due either to recycling of nitrogen (N) within the marsh (with loss of light N₂ or NH₄) or to inputs of isotopically heavy N from sewage. The δ¹⁵N values of particulate matter showed an opposite trend, which indicates higher microbial degradation of organic matter at the inner lagoon. The data demonstrate that the seston in the lagoon is a mixture of detritus from lagoon primary producers with a minor contribution of microalgae. The filter feeders are most likely assimilating a mixture of phytoplankton and microphytobenthos. Digestion of lagoon seston is selective. The δ¹⁵N values of both muscle and digestive gland of filter feeders showed the opposite gradient of particulate matter indicating that the depleted δ¹⁵N of SPM at inner stations was not assimilated or even ingested. Stable isotopes values did not differ between the filter-feeders—the musselMytilus galloprovincialis collected on buoys and the clamTapes decussatus collected in the sediment—suggesting a considerable mixture of benthic-pelagic organic matter throughout the water column. Assessment of the changes in isotopic decomposition of detritus as it decays is required to refine our understanding of organic matter transfers in detrital food webs.