Hydrogen and Helium under high pressure: A case for a classical theory of dense matter

When subject to high pressure, H₂ and ³He are expected to undergo phase transitions, and to become metallic at a sufficiently high pressure. Using a semiclassical theory of dense matter proposed by Savi and Kaanin, calculations of phase transition and metallisation pressure have been performed for these two materials. In hydrogen, metallisation occurs at p _M= (3.0 ± 0.2) Mbar, while for helium the corresponding value is p _M= (106 ± 1) Mbar. A phase transition occurs in helium at p _tr= (10.0 ± 0.4) Mbar. These values are close to the results obtainable by more rigorous methods. Possibilities of experimental verification of the calculations are briefly discussed.     

A comparison of Hα and soft X-ray characteristics of spotless and spot group flares

A comparative analysis of spotless and spot group flares recorded at Hvar and Kanzelhöhe Observatories during the 21st cycle of solar activity is presented. The rate of occurrence of two-ribbon flares was found to be significantly higher for the spotless flares. In comparison with spot group flares of corresponding H importance, the soft X-ray peak values have been systematically lower for the spotless flares. The highest peak values and the energy released in soft X-rays was found for flares with a H ribbon protruding over a major spot umbra. It was found that the effective plasma temperatures in spotless flares have been considerably lower than the temperatures in spot group flares.     

Fluctuations of CaFz(Eu) scintillator background

Background signal of the scintillation detector routinely used for atmospheric Kr-85 counting follows fluctuations, and their connection with cosmic ray variations is searched for. A strong correlation between the 27-day moving average of sunspot numbers and the background is obtained from the 1988 data.     

The ionization balance of the Fe in the solar corona for a non-Maxwellian electron distribution function

The ionization equilibrium of the Fe in the solar corona for a non-Maxwellian electron distribution with an enhanced number of particles in the high-energy tail is presented. A parametric form of the distribution function is used to demonstrate the changes in the ionization equilibrium with changes in the shape of the distribution. The results over the range of temperature 10⁵ K T 10⁸ K for different deviations of the distribution from a Maxwellian are given in tabular form. The results can be used for specific applications in the solar corona, especially in the active corona, where deviations from the Maxwellian distribution can be significant.     

The Hα development of an intense limb flare and associated flaring arches

The H analysis of the development of the strong impulsive and faint gradual phase of the June 26, 1983 flare indicates the following: (1) The flare originated from two microprominences on the southeast border of NOAA 4227. Several similar events are summarized in Table II. (2) The main flare structure was a flare cone, which consisted of a bright surge-like stream, elevated above two flare ribbons (located in the cone's base). The flare cone had a height of about 40 × 10³ km and lasted 4 min in H. The upper part of the cone was terminated by a very fine loop, which was bent to the west, where later a chromospheric brightening occurred at the footpoint of a flaring arch. A 300 keV burst and radio spikes were observed during the maximum flare phase. (3) The flaring arch system, with its apex at a height of about 48 × 10³ km, formed the skeleton for the coronal helmet structure (Figure 7(c)). The velocity of the plasma moving along the flaring arch was between 3500 km s^–1} and 6900 km s^–1} during the first brightening (14:07 UT).     

影响单位进尺成本的因素及其影响规律研究

介绍了一种用于分析不同因素对单位进尺成本影响的新方法--偏因素分析方法,该方法可用于在影响因素众多的情况下确定各因素对施工经济性的影响作用;同时介绍了成本影响系数这一新概念,成本影响系数表示了某一因素在一定的条件下对单位进尺成本影响程度的大小.在钻进技术经济研究中采用成本影响系数,可使对影响单位进尺成本因素的对比评价更加方便易行.以一个5 000 m取心钻进项目为例,计算了不同影响因素变化时的单位进尺成本和成本影响系数,最终根据成本影响系数绝对值的大小,对影响单位进尺成本的不同因素进行了评价.     

Effect of Multipoint Heterogeneity on Nonlinear Transformations for Geological Modeling： Porosity-Permeability Relations Revisited

An analysis of statistical expected values for transformations is performed in this study to quantify the effect of heterogeneity on spatial geological modeling and evaluations. Algebraic transformations are frequently applied to data from logging to allow for the modeling of geological properties. Transformations may be powers, products, and exponential operations which are commonly used in well-known relations (e.g., porosity-permeability transforms). The results of this study show that correct computations must account for residual transformation terms which arise due to lack of independence among heterogeneous geological properties. In the case of an exponential porosity-permeability transform, the values may be positive. This proves that a simple exponential model back-transformed from linear regression underestimates permeability. In the case of transformations involving two or more properties, residual terms may represent the contribution of heterogeneous components which occur when properties vary together, regardless of a pair-wise linear independence. A consequence of power- and product-transform models is that regression equationswithin those transformations need corrections via residual cumulants. A generalization of this result isthat transformations of multivariate spatial attributes require multiple-point random variable relations. This analysis provides practical solutions leading to a methodology for nonlinear modeling using correct back transformations in geology.     

Spin rate estimation of sounding rockets using GPS wind-up

Carrier phase wind-up is a well-known effect that arises from the relative rotation between a transmitting and receiving antenna. In GPS measurements at L1 frequency, this effect translates into an error of 19.029 cm per full relative rotation of antennas. Since this effect is independent of the satellite elevation for pure rotation about the antenna boresight axis, it is usually absorbed by the clock estimation in navigation algorithms. Therefore, the impact of wind-up is usually neglected for applications that do not require accuracies to the cm level like RTK. However, in receiving platforms with high rotation rate, the accumulated wind-up value can be important and actually be larger than receiver noise or even ionospheric variations. Therefore, in such scenarios, the wind-up contribution can be isolated and used as a source of information to compute the spin rate of such platforms using an appropriate combination of GPS observables. This work shows some results of a coarse, yet simple, approach to monitor the rotation angle and spin-rate of spin stabilized sounding rockets flown by DLR.     

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.     

Water balance in the playa-lakes of an arid environment,Monegros, NE Spain

The playa-lakes of the Monegros desert in north-east Spain are saline wetlands in an arid environment, a rare phenomenon in Europe. These extremely valuable habitats are threatened by changes associated with agricultural expansion and incorporation of new irrigated areas. An understanding of the present hydrologic regime will enable changes to be identified, particularly those brought about by flooding and pollution caused by irrigation surplus. This study sets out to show the results of applying a daily water balance in three selected playa-lakes. The balance was in two parts and consisted of: (1) the average balance for all the endorheic basin using the BALAN_11 program, and (2) the water balance in some playa-lakes, applying discharge flows obtained from the previous balance. The resulting volumes of water were converted to water depths and contrasted with reference volumes taken from field and Landsat images. The model was calibrated by applying various hypotheses of function which enabled the results to be adjusted. The proposed balance is an acceptable reproduction of field water measurements during this period, and underlines the consistency of the conceptual model. The methodology used is appropriate for understanding the playa-lakes function and for monitoring them for conservation purposes.