The Transiometer: An Alternative Method of Soil Moisture Measurement in Slowly Permeable Soils

The union of a piezoresistive pressure transducer and a porous ceramic cup was termed "transiometer." The transiometer was constructed from economical and readily available materials. It could be used to measure soil water potentials in both saturated and unsaturated conditions, and was well suited to continuous monitoring with data acquisition equipment.
Transiometer testing was conducted at two sites, one of moderate permeability and the other of slow permeability. The slowly permeable site was instrumented with four replications of the following: (1) transiometers installed at four depths, (2) a transi-ometerwithout the ceramic cup, (3) apiezometer, and (4) access tubes for monitoring soil moisture with a neutron probe. The moderately permeable site was instrumented with a transiometer, two piezometers, and an access tube for monitoring with a neutron probe.
In saturated conditions the transiometer had a faster response time after installation than the piezometer. Faster response makes the transiometer more desirable for use in slowly permeable soils, especially when monitoring dynamic soil water.
Calculated random error of the transiometer measuring system, including a digital voltmeter and a scanner, was typically 0.09 feet (2.8cm), with a maximum calculated to be 0.38 feet (11.5cm). The two most significant components were imprecision of the scanner card and calibration shift. The transiometer was sensitive to atmospheric pressure fluctuations, with sensitivity to atmospheric pressure change increasing with installation depth.     

The partitioning of Zr and Nb between diopside and melts in the system diopside-albite-anorthite

The crystal liquid partitioning of Zr and Nb has been measured experimentally between diopsidic clinopyroxene and melts in the system Di-Ab-An. Nb was found to be excluded from diopside (D(Nb) is always less than 0.02). D(Zr) is quite variable, ranging from 0.05 to 0.45. D(Zr) is positively correlated with the Al content of both the melt and the pyroxene and is negatively correlated with temperature. Both D(Zr) and D(Nb) were found to be independent of oxygen fugacity. This implies that neither Zr or Nb suffer valence changes over a range of oxygen fugacities spanning both lunar and terrestrial conditions.     

Modeling of two-phase flow in membranes and porous media in microgravity as applied to plant irrigation in space

In traditional applications in soil physics it is convention to scale porous media properties, such as hydraulic conductivity, soil water diffusivity, and capillary head, with the gravitational acceleration. In addition, the Richards equation for water flux in partially saturated porous media also contains a gravity term. With the plans to develop plant habitats in space, such as in the International Space Station, it becomes necessary to evaluate these properties and this equation under conditions of microgravitational acceleration. This article develops models for microgravity steady state two-phase flow, as found in irrigation systems, that addresses critical design issues. Conventional dimensionless groups in two-phase mathematical models are scaled with gravity, which must be assigned a value of zero for microgravity modeling. The use of these conventional solutions in microgravity, therefore, is not possible. This article therefore introduces new dimensionless groups for two-phase models. The microgravity models introduced here determined that in addition to porous media properties, important design factors for microgravity systems include applied water potential and the ratio of inner to outer radii for cylindrical and spherical porous media systems.     

Seasonal Forecasting for Climate Hazards: Prospects and Responses

One of the most promising developments for early warning of climate hazards is seasonal climate forecasting. Already forecasts are operational in many parts of the tropics and sub-tropics, particularly for droughts and floods associated with ENSO events. Prospects for further development of seasonal forecasting for a range of climatichazards are reviewed, illustrated with case studies in Africa, Australia, the U.S.A. and Europe. A critical evaluation of the utility of seasonal forecasts centres on vulnerability, communicationchannels, and effective responses. In contrast to short-term prediction, seasonal forecasts raise new issues of preparedness and the use of information.     

The volcanic and magmatic evolution of Volcán Ollagüe, a high-K, late quaternary stratovolcano in the Andean Central Volcanic Zone

Volcán Ollagüe is a high-K, calc-alkaline composite volcano constructed upon extremely thick crust in the Andean Central Volcanic Zone. Volcanic activity commenced with the construction of an andesitic to dacitic composite cone composed of numerous lava flows and pyroclastic deposits of the Vinta Loma series and an overlying coalescing dome and coulée sequence of the Chasca Orkho series. Following cone construction, the upper western flank of Ollagüe collapsed toward the west leaving a collapse-amphitheater about 3.5 km in diameter and a debris avalanche deposit on the lower western flank of the volcano. The deposit is similar to the debris avalanche deposit produced during the May 18, 1980 eruption of Mount St. Helens, U.S.A., and was probably formed in a similar manner. It presently covers an area of 100 km² and extends 16 km from the summit. Subsequent to the collapse event, the upper western flank was reformed via eruption of several small andesitic lava flows from vents located near the western summit and growth of an andesitic dome within the collapse-amphitheater. Additional post-collapse activity included construction of a dacitic dome and coulée of the La Celosa series on the northwest flank. Field relations indicate that vents for the Vinta Loma and post-collapse series were located at or near the summit of the cone. The Vinta Loma series is characterized by an anhydrous, two-pyroxene assemblage. Vents for the La Celosa and Chasca Orkho series are located on the flanks and strike N55 W, radial to the volcano. The pattern of flank eruptions coincides with the distribution in the abundance of amphibole and biotite as the main mafic phenocryst phases in the rocks. A possible explanation for this coincidence is that an unexposed fracture or fault beneath the volcano served as a conduit for both magma ascent and groundwater circulation. In addition to the lava flows at Ollagüe, magmas are also present as blobs of vesiculated basaltic andesite and mafic andesite that occur as inclusions in nearly all of the lavas. All eruptive activity at Ollagüe predates the last glacial episode ( 11.000 a B.P.), because post-collapse lava flows are overlain by moraine and are incised by glacial valleys. Present activity is restricted to emission of a persistent, 100-m-high fumarolic steam plume from a vent located within the summit andesite dome.Sr and Nd isotope ratios for the basaltic andesite and mafic andesite inclusions and lavas suggest that they have assimilated large amounts of crust during crystal fractionation. In contrast, narrow ranges in ¹⁴³Nd/¹⁴⁴Nd and ⁸⁷Sr/⁸⁶Sr in the andesitic and dacitic lavas are enigmatic with respect to crustal contamination.     

Response time of the high-latitude dayside ionosphere to sudden changes in the north-south component of the IMF

The time scale of the response of the high-latitude dayside ionospheric flow to changes in the North-South component of the interplanetary magnetic field (IMF) has been investigated by examining the time delays between corresponding sudden changes. Approximately 40 h of simultaneous IMF and ionospheric flow data have been examined, obtained by the AMPTE-UKS and -IRM spacecraft and the EISCAT “Polar” experiment, respectively, in which 20 corresponding sudden changes have been identified. Ten of these changes were associated with southward turnings of the IMF, and 10 with northward turnings. It has been found that the corresponding flow changes occurred simultaneously over the whole of the “Polar” field-of-view, extending more than 2° in invariant latitude, and that the ionospheric response delay following northward turnings is the same as that following southward turnings, though the form of the response is different in the two cases. The shortest response time, 5.5 ± 3.2 min, is found in the early- to mid-afternoon sector, increasing to 9.5 ± 3.0 min in the mid-morning sector, and to 9.5 ± 3.1 min near to dusk. These times represent the delays in the appearance of perturbed flows in the “Polar” field-of-view following the arrival of IMF changes at the subsolar magnetopause. Overall, the results agree very well with those derived by Etemadi et al. (1988, Planet. Space Sci. 36, 471) from a general cross-correlation analysis of the IMF B_z and “Polar” beam-swinging vector flow data.     

A computational method for approximating a Darcy–Stokes system governing a vuggy porous medium

We develop and analyze a mixed finite element method for the solution of an elliptic system modeling a porous medium with large cavities, called vugs. It consists of a second-order elliptic (i.e., Darcy) equation on part of the domain coupled to a Stokes equation on the rest of the domain, and a slip boundary condition (due to Beavers–Joseph–Saffman) on the interface between them. The tangential velocity is not continuous on the interface. We consider a 2-D vuggy porous medium with many small cavities throughout its extent, so the interface is not isolated. We use a certain conforming Stokes element on rectangles, slightly modified near the interface to account for the tangential discontinuity. This gives a mixed finite element method for the entire Darcy–Stokes system with a regular sparsity pattern that is easy to implement, independent of the vug geometry, as long as it aligns with the grid. We prove optimal global first-order L ² convergence of the velocity and pressure, as well as the velocity gradient in the Stokes domain. Numerical results verify these rates of convergence and even suggest somewhat better convergence in certain situations. Finally, we present a lower dimensional space that uses Raviart–Thomas elements in the Darcy domain and uses our new modified elements near the interface in transition to the Stokes elements.     

Lake Winnipeg: geological setting and sediment seismostratigraphy

Lake Winnipeg, the seventh largest lake in North America, is located at the boundary between the Interior Plains and the Canadian Shield in Manitoba, Canada. Seismic profiles were obtained in Lake Winnipeg on two geoscientific cruises in 1994 and 1996. These data indicate the morphology of the bedrock surface. In most cases, a clear distinction between low relief Paleozoic carbonate rock and high relief Precambrian rock can be made. In northern Lake Winnipeg, the eastern limit of Paleozoic rock is clearly demarcated 30 km west of the previous estimate of its position. In southern Lake Winnipeg, all or most of the Paleozoic sequence terminates at a prominent buried escarpment in the centre of the lake. This indicates that Paleozoic rock on the eastern shore, known from drilling and outcrops, is an outlier. Major moraines are apparent as abrupt, large ridges having a chaotic internal reflection pattern. These include the Pearson Reef Moraine, the George Island Moraine and the offshore extension of The Pas Moraine. Little evidence for extensive or thick till was observed. Instead, fine-grained sediments deposited in glacial Lake Agassiz rest directly on bedrock over most of the lake basin. Hence an episode of erosion to bedrock was associated with glaciation and/or deglaciation. The Agassiz Sequence sediments are well-stratified, drape underlying relief and in some areas are over 100 m thick. In places, stratification in these sediments is disrupted, perhaps by dewatering. Evidence of erosion of Agassiz Sequence sediments by recent currents was observed. The contact between the Agassiz Sequence and the overlying Winnipeg Sequence sediments is a marked angular unconformity. The Agassiz Unconformity indicates up to 10 m of erosion in places. The low-relief character of this unconformity precludes subaerial erosion and the lack of till, moraines, or extensive deformation precludes glacial erosion. Waves appear to be the most likely erosional agent, either in waning Lake Agassiz or early Lake Winnipeg time. Winnipeg Sequence sediments, in places very thin, mantle most of the lakefloor. These sediments were deposited in the present Lake Winnipeg and are faintly stratified to massive and reach about 10 m in thickness in deep water. On the surface of the Winnipeg Sequence, vigorous, episodic currents are thought to contribute to the construction of flow-transverse sand waves as much as 6 m high in a deep, narrow constriction in the lake.     

Glacier fluctuations in the southern Peruvian Andes during the late‐glacial period,constrained with cosmogenic 3He

The occurrence of pronounced climate reversals during the last glacial termination has long been recognised in palaeoclimate records from both hemispheres and from high to low latitudes. Accurate constraint of both the timing and magnitude of events, such as the Younger Dryas and Antarctic Cold Reversal, is vital in order to test different hypotheses for the causes and propagation of abrupt climate change. However, in contrast to higher‐latitude regions, well‐dated records from the Tropics are rare and the structure of late‐glacial tropical climate remains uncertain. As a step toward addressing this problem, we present an in situ cosmogenic ³He surface exposure chronology from Nevado Coropuna, southern Peru, documenting a significant fluctuation of the ice margin during the late‐glacial period. Ten tightly clustered ages from a pair of moraines located halfway between the modern glacier and the Last Glacial Maximum terminus range from 11.9 to 13.9 ka and give an arithmetic mean age of 12.8 ± 0.7 ka (1σ). These data constitute direct evidence for a readvance, or prolonged stillstand, of glaciers in the arid Andes of southwestern Peru. Copyright © 2011 John Wiley & Sons, Ltd.     

Sulfur chemistry in the Venus mesosphere from SO2 and SO microwave spectra

First measurements of SO₂ and SO in the Venus mesosphere (70-100 km) are reported. This altitude range is distinctly above the ∼60-70 km range to which nadir-sounding IR and UV investigations are sensitive. Since July 2004, use of ground-based sub-mm spectroscopy has yielded multiple discoveries. Abundance of each molecule varies strongly on many timescales over the entire sub-Earth Venus hemisphere. Diurnal behavior is evident, with more SO₂, and less SO, at night than during the day. Non-diurnal variability is also present, with measured SO₂ and SO abundances each changing by up to 2× or more between observations conducted on different dates, but at fixed phase, hence identical sub-Earth Venus local times. Change as large and rapid as a 5σ doubling of SO on a one-week timescale is seen. The sum of SO₂ and SO abundances varies by an order of magnitude or more, indicating at least one additional sulfur reservoir must be present, and that it must function as both a sink and source for these molecules. The ratio SO₂/SO varies by nearly two orders of magnitude, with both diurnal and non-diurnal components. In contrast to the strong time dependence of molecular abundances, their altitude distributions are temporally invariant, with far more SO₂ and SO at 85-100 km than at 70-85 km. The observed increase of SO₂ mixing ratio with altitude requires that the primary SO₂ source be upper mesospheric photochemistry, contrary to atmospheric models which assert upward transport as the only source of above-cloud SO₂. Abundance of upper mesospheric aerosol, with assumption that it is composed primarily of sulfuric acid, is at least sufficient to provide the maximum gas phase (SO + SO₂) sulfur reported in this study. Sulfate aerosol is thus a plausible source of upper mesospheric SO₂.