The use of reference models from a priori data to guide 2D inversion of electrical resistivity tomography data

Clay-rich till plains cover much of the UK. Such sites are attractive locations for landfills, since clay aquitards lower the risk of landfill leachate entering groundwater. However, such tills often contain sand and gravel bodies that can act as leachate flow routes. Such bodies may not be detected by conventional site investigation techniques such as drilling boreholes and trial pitting. A method of guided inversion, where a priori data are used to construct structural reference models for use in inverting electrical resistivity tomography data, was proposed as a tool to improve the detection of sand and gravel bodies within clay-rich till sequences.
Following a successful 2D guided inversion synthetic modelling study, a field study was undertaken. Wenner 2D electrical resistivity tomography lines, resistivity cone penetrometry bores and electromagnetic induction ground resistivity data were collected over a site on the East Yorkshire coast, England, where sand and gravel lenses were known to exist from cliff exposures. A number of equally valid geoelectrical models were constructed using the electromagnetic and resistivity cone data. These were used as structural reference models in the inversion of the resistivity tomography data. Blind inversion using an homogenous reference model was also carried out for comparison.
It was shown for the first time that the best solution model produced by 2D inversion of one data set with a range of structural reference models could be determined by using the l ₂ model misfit between the solution models and associated reference models (reference misfit) as a proxy for the l ₂ misfit between the solution models and the synthetic model or 'best-guess' geoelectrical model (true misfit). The 2D methodology developed here is applicable in clay-rich till plains containing sand and gravel bodies throughout the UK.     

∼3,850 Ma tonalites in the Nuuk region,Greenland: geochemistry and their reworking within an Eoarchaean gneiss complex

The Eoarchaean (>3,600 Ma) Itsaq Gneiss Complex of southern West Greenland is dominated by polyphase orthogneisses with a complex Archaean tectonothermal history. Some of the orthogneisses have c. 3,850 Ma zircons, and they vary from rare single phase metatonalites to more common complexly banded migmatites. This is due to heterogeneous strain, in situ anatexis and granitic veining superimposed during younger tectonothermal events. In the single-phase tonalites with c. 3,850 Ma zircon, oscillatory-zoned prismatic zircon is all 3,850 Ma old, but shows patchy ancient loss of radiogenic Pb. SHRIMP spot analyses and laser ablation ICP-MS depth profiling show that thin (usually < 10 μm) younger (3,660–3,590 Ma and Neoarchaean) shells of lower Th/U metamorphic zircon are present on these 3,850 Ma zircons. Several samples with this simple zircon population occur on islands near Akilia. In contrast, migmatites usually contain more complex zircon populations, with often more than one generation of igneous zircon present. Additional zircon dating of banded gneisses across the Complex shows that samples with c. 3,850 Ma igneous zircon are not just a phenomenon restricted to Akilia and adjacent islands. For example, migmatites from Itilleq (c. 65 km from Akilia) contain variable amounts of oscillatory-zoned 3,850 Ma and 3,650 Ma zircon, interpreted, respectively, as the rock age and the time of crustal melting under Eoarchaean metamorphism. With only 110–140 ppm Zr in the tonalites and likely magmatic temperatures of >850°C, zircon solubility–melt composition relationships show that they were only one-third saturated in zircon. Any zircon entrained in the precursor magmas would thus have been highly soluble. Combined with the cathodoluminesence imaging, this demonstrates that the c. 3,850 Ma oscillatory zoned zircon crystallised out of the melt and hence gives a magmatic age. Thus the rare well-preserved tonalites and palaeosome in migmatites testify that c. 3,850 Ma quartzo–feldspathic rocks are a widespread (but probably minor) component in the Itsaq Gneiss Complex. C. 3,850 Ma zircon with negative Eu anomalies (showing growth in felsic systems) also occurs as detrital grains in rare c. 3,800 Ma metaquartzites and as inherited grains in some 3,660 Ma granites (sensu stricto). These demonstrate that still more c. 3,850 Ma rocks were present, but were recycled into Eoarchaean sediments and crustally derived granites. The major and trace element characteristics (e.g. LREE enrichment, HREE depletion, low MgO) of the best-preserved c. 3,850 Ma rocks are typical of Archaean TTG suites, and thus argue for crust formation processes involving important contributions from melting of hydrated mafic crust to the earliest Archaean. Five c. 3,850 Ma tonalites were selected as the best preserved on the basis of field criteria and zircon petrology. Four of these samples have overlapping initial ɛ_Nd (3,850 Ma) values from +2.9 to +3.6± 0.5, with the fourth having a slightly lower value of +0.6. These data provide additional evidence for a markedly LREE-depleted early terrestrial mantle reservoir. The role of c. 3,850 Ma crust should be considered in interpreting isotope signatures of the younger (3,800–3,600 Ma) rocks of the Itsaq Gneiss Complex. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Diffusion-limited REE uptake by eclogite garnets and its consequences for Lu–Hf and Sm–Nd geochronology

Garnets from the Zermatt-Saas Fee eclogites contain narrow central peaks for Lu + Yb + Tm ± Er and at least one additional small peak towards the rim. The REE Sm + Eu + Gd + Tb ± Dy are depleted in the cores but show one prominent peak close to the rim. These patterns cannot be modeled using Rayleigh fractionation accompanied by mineral breakdown reactions. Instead, the patterns are well explained using a transient matrix diffusion model where REE uptake is limited by diffusion in the matrix surrounding the porphyroblast. Observed profiles are well matched if a roughly linear radius growth rate is used. The secondary peaks in the garnet profiles are interpreted to reflect thermally activated diffusion due to temperature increase during prograde metamorphism. The model predicts anomalously low ¹⁷⁶Lu/¹⁷⁷Hf and ¹⁴⁷Sm/¹⁴⁴Nd ratios in garnets where growth rates are fast compared to diffusion of the REE, and these results have important implications for Lu–Hf and Sm–Nd geochronology using garnet.     

Seismic noise at the international gravity point in Prague-Ruzyně (Czechoslovakia)

Summary The vertical component of ground displacement was measured at the Prague - Ruzyn International Gravity Point in the frequency range of 1–300 Hz. The permanent noise, the vibrations caused by the observers during gravimetric observations and by the wind, as well as those due to normal operations at the airport, display maximum peak-to-peak amplitudes of 0.06 µm in the frequency range of 1–50 Hz; with a CG-2 gravimeter this is not detrimental to the accuracy of the observations. The taxiing of turbo-jet and jet aircraft and engine tests of aircraft generate vibrations in frequency ranges of 75–90 and 190–270 Hz. Their amplitudes, according to the results of laboratory tests published for various types of gravity meters (CG-2, GAK-PT, GVP-3, KVG), are of magnitudes which generate errors in tenths of mgl.     

Soil quality and human migration in Kenya and Uganda

Soil degradation is widely considered to be a key factor undermining agricultural livelihoods in the developing world and contributing to rural out-migration. To date, however, few quantitative studies have examined the effects of soil characteristics on human migration or other social outcomes for potentially vulnerable households. This study takes advantage of a unique longitudinal survey dataset from Kenya and Uganda containing information on household-level soil properties to investigate the effects of soil quality on population mobility. Random effects multinomial logit models are used to test for effects of soil quality on both temporary and permanent migration while accounting for a variety of potential confounders. The analysis reveals that soil quality significantly reduces migration in Kenya, particularly for temporary labor migration, but marginally increases migration in Uganda. These findings are consistent with several previous studies in showing that adverse environmental conditions tend to increase migration but not universally, contrary to common assumptions about environmentally-induced migration.     

Isotope Constraints on the Aquatic Carbon Budget: Langat Watershed,Malaysia

Langat River drains a tropical watershed in the southwest of the Malaysian Peninsula. The watershed is heavily urbanized in its downstream portion. Water samples were collected from May 2010 to December 2011, at three localities along the main stem river, 1 location at its Semenyih tributary and from an upstream groundwater source. Concentration and δ¹³C data of riverine DIC and DOC indicate the dominance of C3 plant-derived material as the primary source of carbon, with δ¹³C_DIC values enriched in ¹³C relative to that of the C3 source. This enrichment is likely due to CO₂ outgassing, as calculated concentrations of riverine CO₂ are significantly higher than ambient atmospheric values, with methanogenic activity a theoretically possible contributing factor, particularly at the upstream location. The Langat River therefore acts as a net source of CO₂, with a total sub-basin flux of 19.7 × 10³ t C year^?1. This is comparable to the sum of riverine DOC, DIC and POC loss rates from the sub-basin, calculated as 24.5 × 10³ t C year^?1, and highlights the significance of CO₂ evasion from water bodies to the atmosphere for balancing the budget of the terrestrial carbon cycle. The DIC and DOC concentration and δ¹³C data also suggests that in the more urbanized downriver areas, much of the organic carbon input may be anthropogenicaly derived due to ubiquity of sewage treatment plants and landfill sites. Such human-induced perturbations to riverine carbon cycling should be taken into account in future studies of urbanized watersheds.     

The spatial context of manpower policy: Implications of current Canadian policy on regional development and planning

Macro government policies are often considered outside the context of their spatial impact. Following recent discussions of the problem, this paper is concerned with a critical review of Canadian Manpower policy in the context of national efficiency, regional equity and their interaction. Thus Manpower policy is analysed with respect to its implications concerning regional development as well as implicit regional policy. It is contended that many of the problems of Manpower policy in the spatial context can be traced back to the implicit theoretical background of Manpower policy; Human Capital theory. A radical critique of Human Capital theory is presented and a brief discussion of the ‘functional’ relationship between regional inequality and national macro-planning is also noted. In general the paper concludes that Manpower and regional policies in Canada tend to be contradictory although more research is needed to analyse the spatial impact of macro-policy which may overwhelm spatial policy and significantly influence the future of the spatial economy.     

Time scale of hydrothermal water-rock reactions in Yellowstone National Park based on radium isotopes and radon

We have measured ²²⁴Ra (3.4 d), ²²⁸Ra (5.7 yr), and ²²⁶Ra (1620 yr) and chloride in hot spring waters from the Norris-Mammoth Corridor, Yellowstone National Park. Two characteristic cold-water components mix with the primary hydrothermal water: one for the travertine-depositing waters related to the Mammoth Hot Springs and the other for the sinter-depositing Norris Geyser Basin springs. The Mammoth Hot Springs water is a mixture of the primary hydrothermal fluid with meteoric waters flowing through the Madison Limestone, as shown by the systematic decrease of the (²²⁸Ra/²²⁶Ra) activity ratio proceeding northward. The Norris Geyser Basin springs are mixtures of primary hydrothermal water with different amounts of cold meteoric water with no modification of the primary hydrothermal (²²⁸Ra/²²⁶Ra) activity ratio. Using a solution and recoil model for radium isotope supply to the primary hydrothermal water, a mean water-rock reaction time prior to expansion at 350°C and supply to the surface is 540 years assuming that 250 g of water are involved in the release of the radium from one gram of rock. The maximum reaction time allowed by our model is 1150 years.