Lymanα forests and the evolution of the universe

The Lyα forest absorption lines in the spectra of quasars are interpreted as caused by the crossings of the light beam with the walls of a bubble structure (expanding with the Hubble flow only). Then, the typical separation between the absorption lines is proportional to the mean size of the bubbles. The variable factor is the expansion rate H[z]. The Friedmann regression analysis of the observed line separations determines the density parameter ω₀ and the normalized cosmological term λ₀ = λc²/3H²₀ of the appropriate cosmological model: ω₀ = 0.014 ± 0.002, λ₀ = 1.080 ± 0.006. Depending on the Hubble parameter this method reveals the values of the present mean matter density pm,0 = 2.6 h² · 10⁻²⁸ kg m⁻³ and of the cosmological constant Λ = 3.77 h² · 10⁻⁵² m⁻² (with h = H₀/(100 km/s·Mpc)). According to our analysis all models with Λ = 0 must be excluded. The curvature of space is positive. The curvature radius R₀ is 3.3 times the Hubble radius (c/H₀). The age t₀ is 2.8 times the Hubble age (H₀⁻¹).     

High-resolution ion-microprobe measurement of lead isotopes: Variations within single zircons from Lac Seul,northwestern Ontario

Selected-area measurements of lead-isotope ratios in zircons have been made at high mass resolution using a modified A.E.I. IM20 ion-microprobe. At a working resolution of 3200 it is shown that the important interfering molecular peaks generated from the zircon matrix may be separated from atomic lead peaks. Corrections for overlapping peaks, which are necessary in measurements of lead isotopes at low mass resolution, are then only required for ²⁰⁸Pb.Measurements on N.B.S. standards show no isotope discrimination within counting statistics. Determination of ²⁰⁷Pb/²⁰⁶Pb on 29 single zircon grains from a tonalite gneiss and a granite from Lac Seul, northwestern Ontario, give very variable ratios with mean values close to those of bulk separates. Peaks in the distribution of 207/206 ratios obtained from the tonalite gneiss may be interpreted as evidence for two stages of lead loss. High 207/206 ratios are shown to be significant for at least two zircons and probably record a minimum age of formation of 3.3 ± 0.1 b.y. for the gneiss.     

Surface temperature differences between minerals in crystalline rocks: Implications for granular disaggregation of granites through thermal fatigue

Thermal expansion differences between minerals within rocks under insolation have previously been assumed to drive breakdown by means of granular disaggregation. However, there have been no definitive demonstrations of the efficacy of this weathering mechanism. Different surface temperatures between minerals should magnify thermal expansion differences, and thus subject adjacent minerals to repeated stresses that might cause breakdown through fatigue failure. This work confirms the existence of surface temperature differences between minerals in granitic rocks under simulated short-term temperature fluctuations so as to discriminate their potential for initiating granular disaggregation. The influence of colour, as a surrogate for albedo, and crystal size, as a function of thermal mass are specifically identified because of their ease of quantification. Four rock types with a range of these properties were examined, and subjected to repeated short-term temperature cycles by radiative heating and cooling under laboratory conditions. Results show that while albedo is the main control for overall and individual maximum temperatures, crystal size is the main factor controlling higher temperature differences between minerals. Thus, stones with large differences of mineral sizes can undergo magnified stresses due to thermal expansion differences.     

Growth, ionic and osmotic relations of an Allenrolfea occidentalis population in an inland salt playa of the Great Basin Desert

Variation in growth, physiology and ionic relations patterns of Allenrolfea occidentalis, a perennial halophyte of dry habitats, was studied under field conditions from May 1996 to November 1997. An A. occidentalis community has a characteristic soil pH of 7·3–8·3. During the two years, the population was exposed to great variations in soil salinity, from 29 to 146 dS m⁻¹, and soil moisture, ranging from drought (9·2%) to wet (19%). The salt concentrations were significantly higher in the surface soil layers than in the subsurface layers. Seasonal changes in dry weight are directly related to soil salinity stress. Allenrolfea occidentalis had greater growth and biomass production under saline conditions. Na⁺and Cl⁻ions were accumulated in plant tissues in much greater amounts than K⁺, Ca²⁺, and Mg²⁺. Soil salinities were significantly reduced at the end of the growing season. Water potentials of the shoots decreased significantly with increasing salinity. The plant (F_v/F_mratio) was more affected by salinity and irradiation levels during the summer period.     

RHESSI Microflares: II. Implications for Loop Structure and Evolution

We present simple analytic models which predict the peak X-ray emission measure and temperature attained in flares in which the chromospheric evaporation process takes place either in a single ‘monolithic’ loop or in a loop consisting of several filaments that are created successively as the energy release process proceeds in time. As possible mechanisms driving chromospheric evaporation we consider both classical heat conduction from the loop top and non-thermal electron beams. The model predictions are tested for a set of 18 well studied RHESSI microflares. The results suggest beam driven evaporation in filamented loops as being capable of accounting for the observed emission measures and temperatures though there are issues with the very high beam densities needed. On the other hand, estimates of the emission measures achieved by conductive evaporation which are derived by using the Rosner – Tucker – Vaiana (RTV) scaling law are much larger than the observed ones. Possible reasons for this discrepancy are discussed.     

A Bayesian approach to inverse modelling of stratigraphy, part 2: Validation tests

A novel inverse modelling method is applied to the problem of constraining the environmental parameters (e.g. relative sea level, sediment supply) that control stratigraphic architecture. This technique links forward modelling of shallow-marine wave/storm-dominated stratigraphy to a combination of inverse methods formulated in a Bayesian framework. We present a number of examples in which relative sea-level and sediment-supply curves were inferred from synthetic vertical successions of grain size (e.g. wells) and synthetic thickness curves (e.g. seismically derived isopachs) extracted from a forward model simulation. These examples represent different scenarios that are designed to test the impact of data distribution, quantity and quality on the uncertainty of the inferred parameters. The inverse modelling approach successfully reproduces the gross stratigraphic architectures and relative sea level and sediment-supply histories of the synthetic forward model simulation, within the constraints of the modelled data quality. The relative importance of the forcing parameters can be evaluated by their sensitivity and impact on the inverted data. Of equal importance, the inverse results allow complete characterisation of the uncertainties inherent to the stratigraphic modelling tool and to the data quality, quantity and distribution. The numerical scheme also successfully deals with the problem of non-uniqueness of the solution of the inverse problem. These preliminary results suggest that the inverse method is a powerful tool in constraining stratigraphic architecture for hydrocarbon reservoir characterisation and modelling, and it may ultimately provide a process-based geological complement to standard geostatistical tools.     

Impact of Gas Adsorption Induced Coal Matrix Damage on the Evolution of Coal Permeability

It has been widely reported that coal permeability can change from reduction to enhancement due to gas adsorption even under the constant effective stress condition, which is apparently inconsistent with the classic theoretical solutions. This study addresses this inconsistency through explicit simulations of the dynamic interactions between coal matrix swelling/shrinking induced damage and fracture aperture alteration, and translations of these interactions to permeability evolution under the constant effective stress condition. We develop a coupled coal–gas interaction model that incorporates the material heterogeneity and damage evolution of coal, which allows us to couple the progressive development of damage zone with gas adsorption processes within the coal matrix. For the case of constant effective stress, coal permeability changes from reduction to enhancement while the damage zone within the coal matrix develops from the fracture wall to further inside the matrix. As the peak Langmuir strain is approached, the decrease of permeability halts and permeability increases with pressure. The transition of permeability reduction to permeability enhancement during gas adsorption, which may be closely related to the damage zone development in coal matrix, is controlled by coal heterogeneity, external boundary condition, and adsorption-induced swelling.     

Transport and retention of suspended particulate matter and bacteria in the Humber-Ouse Estuary, United Kingdom, and their relationship to hypoxia and anoxia

Data are presented on dissolved oxygen (DO) concentrations and their relationship to salinity, suspended particulate matter (SPM), concentrations, and the turbidity maximum in the Humber-Ouse Estuary, United Kingdom, during summer 1995. Measurements in the upper Humber during March 1995 showed DO in the range 82% to 87% of saturation. Suspended particulate matter concentrations were <5000 mg l^?1 and salinity was in the range 0.5 to 12. In contrast, a pronounced DO sag occurred in the upper reaches of the Ouse during medium and spring tide, summer conditions. The DO minimum was essentially an anoxic level and was associated with the location of the turbidity maximum, at salinities between about 0.4 and 1.5. SPM concentrations at 1 m beneath the surface reached 25,000 mg l^?1 in the turbidity maximum, between about 20 km and 40 km from the tidal limit. Suspended particulate matter concentrations were much lower at neap tides, although dense suspensions of SPM (>60,000 mg l^?1) occurred within 1 m of the bed in the turbidity maximum region. A spring-neap record showed a dramatic and tidally controlled decrease in DO at very low salinities as the tides progressed from neaps to springs. An anchor station located down-channel of the turbidity maximum showed that about 95% of the variance in DO, which varied from 28% at low-water slack to 67% at high-water slack, could be explained in terms of salinity variation. At the up-channel margins of the turbidity maximum, DO increased from zero (anoxia) near high water to 60% near low water slack, in contrast to the behavior down-channel of the turbidity maximum. About 82% of the variance in DO could be explained in terms of salinity variations alone. Only 43% of the DO variance could be explained in terms of SPM alone. Up-channel of the turbidity maximum, SPM concentrations were relatively low (<3000 mg l^?1) and DO levels varied from 48% of saturation near high water to 83% near low water slack. About 76% of the variance in DO could be explained in terms of salinity variations alone. Within the turbidity maximum region, DO varied from <2% saturation on the early flood and late ebb and maximized around 7% at high water slack. About 63% of the variance in DO could be explained in terms of salinity variation alone. This increased to 70% when suspended particulate matter was taken into account. Only 29% of the DO variance could be explained in terms of suspended particulate matter alone. Because bacteria were likely to have been the cause of the observed reduction in DO, the numbers of bacteria, both free-living and attached to particles, were measured in the turbidity maximum region. Numbers of free-living bacteria were low and most of the bacteria were attached to sediment particles. There was a linear correlation between total bacterial number and suspended particulate matter concentration, suggesting that the strong DO demand was exerted locally as a result of bacterial activity associated with increased suspended particulate matter concentrations. An order of magnitude analysis of DO consumption within the Ouse’s turbidity maximum, based on the premise that DO depletion was directly related to suspended particulate matter concentrations and that DO addition was due to reaeration, indicates that complete deoxygenation could have occurred with an oxygen depletion rate of ～0.01 mg DO h^?1/g suspended particulate matter during the residence time of waters within the turbidity maximum (～7 d). This rate was sufficiently fast that anoxic to aerobic conditions were able to develop a spring-neap periodicity within the turbidity maximum, but too slow to generate substantial intratidal fluctuations in DO. This is in accordance with the observations, which show that relatively little of the intratidal variance in DO could be explained in terms of suspended particulate matter fluctuations, whereas most of the variance could be explained in terms of salinity, which behaved as a surrogate measure for the proximity of the turbidity maximum.     

A portable extruder for accurate and precise high-resolution subsampling of unconsolidated sediment cores

Journal of Paleolimnology - We developed a portable extruder for precise and accurate high-resolution subsampling of unconsolidated sediment cores. This extruder is capable of producing subsamples...