ANALYTICAL AERIAL TRIANGULATION BLOCK ADJUSTMENT; THE DIRECT HEIGHT SOLUTION INCORPORATING TIE-STRIPS

The historical development of analytical aerial triangulation block adjustment is mentioned by way of introduction. The advantages of separating the plan and height adjustments are given and the observation equations of a typical adjustment section are analysed to show that this convenient practice is justified in normal circumstances. The principles of a direct solution of the normal equations suitable for a moderate-sized computer, are explained and developed in detail for the height adjustment. The advantages of tie-strips in the height adjustment are demonstrated and the difficulties which then arise are discussed. An approximate method which overcomes these difficulties is developed. Details of the computer programmes used are given in Appendix B.     

Ionospheric conditions

A general analysis of ionospheric conditions has been made in the light of possible ionic reactions occurring in the upper atmosphere. Data obtained on various parameters, such as ionic production and recombination, show that precise knowledge of the spectral distribution of solar radiation is needed and that other experimental determinations on dissociative recombinations are required.

The ionic complexity of the ionosphere is underlined by describing how the atomic ions O⁺ and N⁺ react with N₂, O₂ and NO molecules. The behavior of the molecular ions N⁺₂, O⁺₂and NO⁺depends on a group of simultaneous processes involving charge transfers and ionatom interchanges which are more important than dissociative recombinations. The altitude distribution of ions is exemplified by discussing the relative importance of various loss coefficients in the D-, E- and F-regions. It is seen that molecular nitrogen ions are subject to important charge transfer processes, that nitric oxide ions are always final products destroyed only by dissociative recombination. Additionally, the entire production of atomic oxygen ions is related to the photoionization of molecular nitrogen. Some information is also given on possible anomalies in the ratio of O⁺₂ and NO⁺ densities in the lower ionosphere. From the lack of sufficient experimental information on ionic processes it is shown that a precise analysis of ionospheric behavior remains highly speculative.     

Basalt from Louisiana continental shelf

A basalt outcrop was discovered on Alderdice Bank on the outer Louisiana continental shelf. The basalt shows an age of 76.8 ± 3.3 × 10⁶ years. Textural, mineralogical, and chemical characteristics indicate that it is an alkali basalt of shallow intrusive origin. It was probably brought to the seafloor by salt tectonics and exposed due to salt dissolution.An accurate account of the Mesozoic geologic history of the Gulf of Mexico must consider the apparent consanguinity of all magmatic rocks of the region, including the Alderdice Bank basalt, and the apparent basinward decrease in age of magmatic activities.     

A digital event-recording ocean bottom seismometer capsule

The ocean bottom seismometer capsule contains a 1 Hz. vertical seismometer and triggerable or programmable digital recording system. The output of the seismometer is continuously digitized at a preselected rate of 64, 128, or 256 samples/sec. The digital data words are mixed with a time code and synchronization characters, serialized and passed through a 1536 sample shift register which acts as a delay line. The serial output bits are then encoded and recorded on a SONY TC800B tape recorder which is turned on when a seismic event occurs. The event trigger occurs when the seismic signal jumps to 8 times the time averaged input signal. A memory may be programmed to run the recorder on a schedule so that small amplitude signals from refraction shots are sure to be recorded. Data are recovered using the same recorder for playback and a decoder which provides an analog output for field data interpretation or a digital output for computer analysis. An acoustic transponder allows precise ranges between the capsule and ship to be determined. In addition, commands for the capsule to release or to transmit diagnostic data may be given from the surface ship. The capsule falls freely to the ocean bottom. After a predetermined time or when a release command is received, it is released from a 68 kg steel tripod and floats to the surface. A dual timer and explosive bolt system is used to increase recovery reliability.The first capsules were designed and constructed between October 1972 and October 1973. Good results were obtained from 38 out of 43 launchings made on six expeditions in 1974, 1975, and 1976. Four capsules have been lost.     

Comparison of oscillatory and stationary flow through porous media

Experiments were conducted in an oscillatory water tunnel to investigate what effects temporal inertia has on the resistance of a granular medium. The flow law governing stationary porous media flow is reasonably well accepted and understood but the effects of unsteady flow have commonly been neglected. The present research was designed to assess the magnitude of the acceleration effects on media of uniformly packed spheres of equal diameter and on one sample of randomly placed stone.Oscillatory flow tests were made in a large oscillatory flume tunnel with periods varying from 3 to 12 seconds. The influence of properties of the medium (grain size and porosity) were tested by using spheres with two different diameters and packing each size sphere in different geometric arrangements. Tests made on a stone sample provided a qualitative assessment of the effects of more random material properties.For the experiments described in this paper, the Forchheimer unsteady-stationary flow law described the oscillatory measurements well when velocities and energy losses were maximum. Empirical coefficients determined from steady-stationary flow were generally found to apply to the unsteady flow, however some evidence of dependency on the period of oscillation was noted.     

Integrating Uncertainty Theories with GIS for Modeling Coastal Hazards of Climate Change

Prediction of coastal hazards due to climate change is fraught with uncertainty that stems from complexity of coastal systems, estimation of sea level rise, and limitation of available data. In-depth research on coastal modeling is hampered by lack of techniques for handling uncertainty, and the available commercial geographical information systems (GIS) packages have only limited capability of handling uncertain information. Therefore, integrating uncertainty theory with GIS is of practical and theoretical significance. This article presents a GIS-based model that integrates an existing predictive model using a differential approach, random simulation, and fuzzy set theory for predicting geomorphic hazards subject to uncertainty. Coastal hazard is modeled as the combined effects of sea-level induced recession and storm erosion, using grid modeling techniques. The method is described with a case study of Fingal Bay Beach, SE Australia, for which predicted responses to an IPCC standard sea-level rise of 0.86 m and superimposed storm erosion averaged 12 m and 90 m, respectively, with analysis of uncertainty yielding maximum of 52 m and 120 m, respectively. Paradoxically, output uncertainty reduces slightly with simulated increase in random error in the digital elevation model (DEM). This trend implies that the magnitude of modeled uncertainty is not necessarily increased with the uncertainties in the input parameters. Built as a generic tool, the model can be used not only to predict different scenarios of coastal hazard under uncertainties for coastal management, but is also applicable to other fields that involve predictive modeling under uncertainty.     

Biogeochemical impacts due to mesoscale eddy activity in the Sargasso Sea as measured at the Bermuda Atlantic Time-series Study (BATS)

A comparison of monthly biogeochemical measurements made from 1993 to 1995, combined with hydrography and satellite altimetry, was used to assess the impacts of nine eddy events on primary productivity and particle flux in the Sargasso Sea. Measurements of primary production, thorium-234 flux, nitrate+nitrite, and photosynthetic pigments made at the US JGOFS Bermuda Atlantic Time-series Study (BATS) site were used. During the 3 years of this study, four out of six high thorium-234 flux events occurred during the passage of an eddy. Primary production nearly as high as the spring bloom maximum was observed in two mode-water eddies (May 1993 and July 1995). The 1994 spring bloom at BATS was suppressed by the passage of an anticyclone. Distinct phytoplankton community shifts were observed in mode-water eddies, which had an increased percentage of diatoms and dinoflagellates, and in cyclones, which had an increased percentage of Synechococcus. These variations in species composition within mode-water eddies and cyclones may be associated with the ages of the sampled eddies, and/or differences in physical, chemical, and biological factors in these two distinct eddy types. In general, eddies that were 1–2 months old elicited a large biological response; eddies that were 3 months old may show a biological response and were accompanied by high thorium flux; eddies that were 4 months old or older did not show a biological response or high thorium flux. A conceptual model depicting temporal changes during eddy upwelling, maturation, and decay can explain the observations in all seven upwelling eddies present in the time-series investigated herein.     

Trace element diagenesis in pyrite-rich sediments of the Achterwasser lagoon, SW Baltic Sea

The early diagenesis of trace elements (V, Cr, Co, Cu, Zn, As, Cd, Ba, U) in anoxic sediments of the Achterwasser, a shallow lagoon in the non-tidal Oder estuary in the Baltic Sea, was investigated in the context of pyrite formation. The dissolved major redox parameters show a two-tier distribution with transient signals in the occasionally re-suspended fluid mud layer (FM) and a permanently established diagenetic sequence in the sediment below. Intense microbial respiration leads to rapid depletion of O₂ within the uppermost mm of the FM. The reduction zones of Mn, Fe and sulfate overlap in the FM and in the permanently anoxic sediment section which appears to be a typical feature of estuarine sediments, under low-sulfate conditions. Degrees of pyritization (DOP) range from 50% in the FM to remarkably high values > 90% at 50 cm depth. Pyrite formation at the sediment surface is attributed to the reaction of Fe-monosulfides with intermediate sulfur species via the polysulfide pathway. By contrast, intense pyritization in the permanently anoxic sediment below is attributed to mineral growth via adsorption of aqueous Fe-sulfide complexes onto pyrite crystals which had originally formed in the surface layer.The studied trace elements show differential behavior patterns which are closely coupled to the diagenetic processes described above: (i) Zn, Cu and Cd are liberated from organic matter in the thin oxic layer of the sediment and diffuse both upwards across the sediment/water boundary and downwards to be trapped as monosulfides, (ii) V, Cr, Co and As are released during reductive dissolution of Mn- and Fe-oxyhydroxides, (iii) U removal from pore water occurs concomitantly to Fe reduction in the FM and is attributed to reduction of U(VI) to U(IV), (iv) the Ba distribution is controlled by reductive dissolution of authigenic barite in the sulfate reduction zone coupled with upward diffusion and re-precipitation. The incorporation of trace elements into pyrite is most intense for Co, Mn and As, intermediate for Cu and Cr and little to negligible for U, Zn, Cd, V and Ba. The observed trend is largely in agreement with previous studies and may be explained with differing rates for ligand exchange. Slow and fast ligand exchange and thus precipitation kinetics are also displayed by downcore increasing (Mn, Cr, Co and As) or constantly low (Zn, Cu, Cd) pore water concentrations. The downward increasing degrees of trace metal pyritization (DTMP) for Co, Cu, Zn and As are, in analogy to pyrite growth, assigned to adsorption of sulfide complexes or As oxyanions onto preexisting pyrite minerals.     

A Pull-Up Shallow Water Seismometer

An inexpensive Pull-Up Shallow Water Seismometer (PUSS) has been designed and built to conduct long range seismic refraction experiments in the North Sea and the continental shelf around Britain, with the particular goal of studying the crustal and lithospheric structure under the epeirogenic basin of the North Sea. Signals from a gimbal-mounted 3-component geophone and a hydrophone are frequency modulated and mixed with clock and flutter correction signals before being recorded on a standard speed cassette tape recorder, with one hour of recording time. A 100 hour programmable timer allows the interval between the time of reset of the clock and each shot window of optional 5 or 10 min duration, to be preselected. The PUSS is launched and recovered using a pull-up technique originally developed for current meters. The replay system is also described.In May 1976 sea trials of 5 PUSSes were conducted along a 200 km refraction line in the North Sea. The encouraging performance of the equipment resulted in the decision to build a further 10 units and to proceed with a 400 km refraction line planned for the summer of 1977.