Combined three-dimensional electric and seismic tomography study on the Åknes rockslide in western Norway

We present a combined 3-D geoelectric and seismic tomography study conducted on the large Åknes rockslide in western Norway. Movements on the slope are strongly influenced by water infiltration, such that the hydrogeological regime is considered as a critical factor affecting the slope stability. The aim of our combined geophysical study was to identify and visualize the main shallow tension fractures and to determine their effect on hydraulic processes by comparing the geophysical results with information from borehole logging and tracer tests. To resolve the complex subsurface conditions of the highly fractured rock mass, a three-dimensional set-up was chosen for our seismic survey. To map the water distribution within the rock mass, a pattern of nine intersecting 2-D geoelectric profiles covered the complete unstable slope. Six of them that crossed the seismic survey area were considered as a single data set in a 3-D inversion. For both methods, smoothing-constraint inversion algorithms were used, and the forward calculations and parameterizations were based on unstructured triangular meshes. A pair of parallel shallow low-velocity anomalies (< 1400 m/s) observed in the final seismic tomogram was immediately underlain by two anomalies with resistivities <13 kΩm in the resistivity tomogram. In combination with borehole logging results, the low-velocity and resistivity anomalies could be associated with the drained and water-filled part of the tension fractures, respectively. There were indications from impeller flowmeter measurements and tracer tests that such tension fractures intersected several other water-filled fractures and were responsible for distinct changes of the main groundwater flow paths.     

Multi-Source Emission Determination Using an Inverse-Dispersion Technique

Inverse-dispersion calculations can be used to infer atmospheric emission rates through a combination of downwind gas concentrations and dispersion model predictions. With multiple concentration sensors downwind of a compound source (whose component positions are known) it is possible to calculate the component emissions. With this in mind, a field experiment was conducted to examine the feasibility of such multi-source inferences, using four synthetic area sources and eight concentration sensors arranged in different configurations. Multi-source problems tend to be mathematically ill-conditioned, as expressed by the condition number κ. In our most successful configuration (average κ = 4.2) the total emissions from all sources were deduced to within 10% on average, while component emissions were deduced to within 50%. In our least successful configuration (average κ = 91) the total emissions were calculated to within only 50%, and component calculations were highly inaccurate. Our study indicates that the most accurate multi-source inferences will occur if each sensor is influenced by only a single source. A “progressive” layout is the next best: one sensor is positioned to “see” only one source, the next sensor is placed to see the first source and another, a third sensor is placed to see the previous two plus a third, and so on. When it is not possible to isolate any sources κ is large and the accuracy of a multi-source inference is doubtful.     

Late Wisconsinan glaciation models of northern Maine and adjacent Canada

Surficial stratigraphic units of Aroostook County, Maine, have been mapped and formal stratigraphic names for these units are proposed. Evidence exists for at least two distinct glacial phases which are represented by three tills. Two of these tills were deposited penecontemporaneously either as the result of coalescing ice sheets or as the result of the thermal regime existing within a single ice sheet. The oldest till is named the St. Francis and is correlated with the Chaudière Till of southeastern Quebec. The other tills are named the Mars Hill and Van Buren tills, respectively, and are correlated with the Lennoxville till of southeastern Quebec. Interbedded stratified sediments associated with the St. Francis till are correlated with the Gayhurst Formation. Stratified sediments associated with Van Buren and Mars Hill tills are correlated with post Lennoxville sediments of Quebec. Granite-gneiss erratics of Canadian Shield provenance in the Van Buren till indicate advance of the Laurentide ice into northern Maine during late Wisconsinan time. Moraines in southern Aroostook County with associated outwash and eskers record general recession from coastal Maine. Recession occurred after the formation of the Pineo Ridge moraine in Maine and the St. Antonin-Highland Front moraine complex in Quebec. The Caribou-Winterville moraine complex in northern Maine marks the boundary between the penecontemporaneously deposited Van Buren and Mars Hill surface tills and is correlated with the Grand Falls moraine at Grand Falls, New Brunswick.     

The infrared spectrum of asteroid 433 Eros

The mineralogical composition of asteroid Eros has been determined from its infrared spectrum (0.9–2.7μm; 28cm^?1 resolution). Major minerals include metallic NiFe and pyroxene; no spectroscopic evidence for olivine or plagioclase feldspar was found. The IR spectrum of Eros is most consistent with a stony-iron composition.     

Molecular and isotopic partitioning of low-molecular-weight hydrocarbons during migration and gas hydrate precipitation in deposits of a high-flux seepage site

Detailed knowledge of the extent of post-genetic modifications affecting shallow submarine hydrocarbons fueled from the deep subsurface is fundamental for evaluating source and reservoir properties. We investigated gases from a submarine high-flux seepage site in the anoxic Eastern Black Sea in order to elucidate molecular and isotopic alterations of low-molecular-weight hydrocarbons (LMWHC) associated with upward migration through the sediment and precipitation of shallow gas hydrates. For this, near-surface sediment pressure cores and free gas venting from the seafloor were collected using autoclave technology at the Batumi seep area at 845 m water depth within the gas hydrate stability zone.Vent gas, gas from pressure core degassing, and from hydrate dissociation were strongly dominated by methane (> 99.85 mol.% of ∑[C₁–C₄, CO₂]). Molecular ratios of LMWHC (C₁/[C₂ + C₃] > 1000) and stable isotopic compositions of methane (δ¹³C = ? 53.5‰ V-PDB; D/H around ? 175‰ SMOW) indicated predominant microbial methane formation. C₁/C₂₊ ratios and stable isotopic compositions of LMWHC distinguished three gas types prevailing in the seepage area. Vent gas discharged into bottom waters was depleted in methane by > 0.03 mol.% (∑[C₁–C₄, CO₂]) relative to the other gas types and the virtual lack of ¹⁴C–CH₄ indicated a negligible input of methane from degradation of fresh organic matter. Of all gas types analyzed, vent gas was least affected by molecular fractionation, thus, its origin from the deep subsurface rather than from decomposing hydrates in near-surface sediments is likely.As a result of the anaerobic oxidation of methane, LMWHC in pressure cores in top sediments included smaller methane fractions [0.03 mol.% ∑(C₁–C₄, CO₂)] than gas released from pressure cores of more deeply buried sediments, where the fraction of methane was maximal due to its preferential incorporation in hydrate lattices. No indications for stable carbon isotopic fractionations of methane during hydrate crystallization from vent gas were found. Enrichments of ¹⁴C–CH₄ (1.4 pMC) in short cores relative to lower abundances (max. 0.6 pMC) in gas from long cores and gas hydrates substantiates recent methanogenesis utilizing modern organic matter deposited in top sediments of this high-flux hydrocarbon seep area.     

Monitoring overburden layer changes and fault movements from time-lapse seismic data on the Valhall Field

A method developed by Røste et al. , which discriminates between layer thickness and velocity changes, is tested on pre-stack time-lapse seismic ocean bottom cable (OBC) data from the Valhall Field. A key parameter in this discrimination process is the dilation factor, α, which is the relative velocity change divided by the relative thickness change within a given layer. The high quality and good repeatability of the OBC data enables us to estimate α with a reasonable accuracy for α-values between 0 and −5. For α-values below −5, complementary information, like for instance geomechanics is required. For the top reservoir horizon we estimate a maximum subsidence of 0.50 m ± 0.29 m and a corresponding velocity decrease for the sequence from the seabed to the top reservoir of 2.0 m s⁻¹± 0.40 m s⁻¹.
Time-lapse distortion patterns with characteristic time-shift versus offset signatures are observed. The positions and vertical extents of the distortion zones are determined from ray path considerations and modelling. The distortion zones correlate with buried faults, indicating that a (time-lapse) distortion zone might be produced by a localized slip in a fault zone. We present an extended method which allows for vertical (in addition to lateral) variations in the relative thickness and velocity changes. This method can be viewed as a simplified version of time-lapse tomography, but involving fewer unknown parameters, giving more stability to the estimated changes in thickness and velocity. Using this technique, we are able to estimate α for positions with localized time-lapse distortions.     

The effective source rocks in the north Cambay Basin, India

Source rock screening reveals five laterally extending potential sources (PS) in the Paleogene. The PSs are SR5 and SR6 in dominantly marine early Eocene to late Paleocene Cambay Shale formation, and SR7, SR8/9, and SR11/12 in dominantly freshwater early Paleocene Olpad formation. Only 3 PSs, SR11/12, SR8/9, and SR7 have attained vitrinite reflectance of 0.75% at 45, 7, and 2 mybp, respectively. Chromatographic and isotope data of oils and PS samples suggest that mainly the Olpad source rocks: SR7 and SR8/9 contributed to the discovered oils. The Cambay Shale source rocks, SR5 and SR6, contrary to the prevalent view, possibly have no significant contribution towards the accumulated oils.     

Metropolitan growth and the mobility and immobility of skilled and creative couples across the life course

The human capital and creative class hypotheses argue that the agglomeration of skilled and creative people is key to economic growth. Migration is assumed to play an important role in forming these agglomerations. However, the results of this study indicate that while younger cohorts of skilled and creative individuals are highly mobile, skilled and creative couples are highly immobile. This research hypothesizes that it is these relatively immobile skilled and creative couples that are behind the link between urban growth and concentrations of skill and creativity. Indeed, this analysis finds a strong empirical link between concentrations of skilled couples, but not creative class couples, and economic growth. Public policies designed to increase the size of the skilled population should be directed at retaining younger cohorts long enough for them to develop the local networks upon which spillover effects rely.     

Climate change impacts on U.S. Coastal and Marine Ecosystems

Increases in concentrations of greenhouse gases projected for the 21st century are expected to lead to increased mean global air and ocean temperatures. The National Assessment of Potential Consequences of Climate Variability and Change (NAST 2001) was based on a series of regional and sector assessments. This paper is a summary of the coastal and marine resources sector review of potential impacts on shorelines, estuaries, coastal wetlands, coral reefs, and ocean margin ecosystems. The assessment considered the impacts of several key drivers of climate change: sea level change; alterations in precipitation patterns and subsequent delivery of freshwater, nutrients, and sediment; increased ocean temperature; alterations in circulation patterns; changes in frequency and intensity of coastal storms; and increased levels of atmospheric CO₂. Increasing rates of sea-level rise and intensity and frequency of coastal storms and hurricanes over the next decades will increase threats to shorelines, wetlands, and coastal development. Estuarine productivity will change in response to alteration in the timing and amount of freshwater, nutrients, and sediment delivery. Higher water temperatures and changes in freshwater delivery will alter estuarine stratification, residence time, and eutrophication. Increased ocean temperatures are expected to increase coral bleaching and higher CO₂ levels may reduce coral calcification, making it more difficult for corals to recover from other disturbances, and inhibiting poleward shifts. Ocean warming is expected to cause poleward shifts in the ranges of many other organisms, including commercial species, and these shifts may have secondary effects on their predators and prey. Although these potential impacts of climate change and variability will vary from system to system, it is important to recognize that they will be superimposed upon, and in many cases intensify, other ecosystem stresses (pollution, harvesting, habitat destruction, invasive species, land and resource use, extreme natural events), which may lead to more significant consequences.