Application of trichloroacetic acid (TCA) to extraction of soft body for the determination of tissue Cd, Cu, Pb and Zn in the prosobranch Hydrobia ulvae (Pennant)

The application of trichloroacetic acid (TCA) as a shell extractant for preparation of soft body parts with reference to tissue metal concentrations (Cd, Cu, Pb, Zn) in shellfish has been evaluated on the example of the mud snail Hydrobia ulvae, a small marine prosobranch densely present in rocky and soft-bottom habitats of the eastern Atlantic. A solution of 0.1 M TCA was tested on individuals treated according to two different protocols: (1) thawed after freezing ("non-dried") and (2) thawed and air-dried to a constant weight ("dried"). Two points were investigated in detail to improve the method: individual soft tissue dry weight and tissue metal concentration following a standard digestion method. In both instances, the results were compared with those from manually dissected snails. Conditions for total shell decalcification of 60 individuals (3-4 mm long) were 5.5 h in 20 ml of 0.1 M TCA.No differences in individual soft tissue weight were observed between the treatments, indicating good efficiency of the TCA extraction with respect to weight of soft body parts. In contrast, tissue metal concentrations varied among treatments. The TCA extraction of the dried animals had a good recovery for Cd, most likely due to the lower solubility of Cd vital cellular components (proteins and mineral concretions) from the dried tissue. Satisfactory recoveries of the tissue concentrations of Cu and Pb were obtained for the non-dried individuals. This might be related to the specific distribution of metals in the organism (namely in the digestive glands and gonads) and their different chemical reactivity with TCA after the tissue was dried. Limited susceptibility of Zn-bearing protein bindings to complexing with TCA also accounts for significantly lower concentrations of Zn in the mud snail's soft tissue that was extracted. The 0.1 M TCA solution is therefore recommended for extraction of the shells of Hydrobia ulvae for tissue determination of Cd, Cu and Pb; however the treatment protocol does affect metal recovery and thus a consistent procedure should be followed.The extracted metals from the soft tissues and shells of the mud snails (on the basis of both metal concentrations and contents) were ranked in order of increasing contribution of soft body parts to the total (shell+tissue): Pb相似文献   

Sediment transport at the network scale and its link to channel morphology in the braided Vjosa River system

In this article we apply the CASCADE network-scale sediment connectivity model to the Vjosa River in Albania. The Vjosa is one of the last unimpaired braided rivers in Europe and, at the same time, a data scarce environment, which limits our ability to model how this pristine river might respond to future human disturbance. To initialize the model, we use remotely sensed data and modeled hydrology from a regional model. We perform a reach-by-reach optimization of surface grain size distribution (GSD) and bedload transport capacity to ensure equilibrium conditions throughout the network. In order to account for the various sources of uncertainty in the calculation of transport capacity, we performed a global sensitivity analysis. The modeled GSD distributions generated by the sensitivity analysis generally match the six GSDs measured at different locations within the network. The modeled bedload sediment fluxes increase systematically downstream, and annual fluxes at the outlet of the Vjosa are well within an order of magnitude of fluxes derived from previous estimates of the annual suspended sediment load. We then use the modeled sediment fluxes as input to a set of theoretically derived functions that successfully discriminate between multi-thread and single-thread channel patterns. This finding provides additional validation of the model results by showing a clear connection between modeled sediment concentrations and observed river morphology. Finally, we observe that a reduction in sediment flux of about 50% (e.g., due to dams) would likely cause existing braided reaches to shift toward single thread morphology. The proposed method is widely applicable and opens a new avenue for application of network-scale sediment models that aid in the exploration of river stability to changes in water and sediment fluxes.     

Effects of 12 years' operation of a sewage treatment plant on trace metal occurrence within a Mediterranean commercial sponge (Spongia officinalis, Demospongiae)

The present field study uses Spongia officinalis for assessing trace metals occurrence in time and space within Mediterranean rocky communities. Nine sites were selected in the Marseille area for studying spatial trends in 12 metal concentrations. Long term changes in 8 metal concentrations were assessed at sites that had been sampled before and 12 years after the opening of a treatment plant. Spongia officinalis highly concentrated all the trace metal surveyed excepted Hg and Cd. The overall contamination level registered provided a classification of the study sites which is congruent with that given by other studies on pollutant accumulation in neighbouring sandy-bottoms or benthic assemblages. Among the metals studied, Fe, Pb, Cr are those that best highlighted a pollution gradient. In the present study, only Cd concentration did not vary in space. Except for Ni, all pollutant concentrations clearly decreased between 1984 and 1999. This very impressive decrease in heavy metal concentrations within the Marseille area represents an indisputable evidence of the improvement of the seawater quality resulting from 12 years' operation of the Marseille sewage plant. Moreover, the significant decrease also recorded in the reference population at Port-Cros might reflect an overall improvement in the seawater quality of the NW Mediterranean.     

Origin and mechanism of Subantarctic Mode Water formation and transformation in the Southern Indian Ocean

The sources and pathways of mode waters and lower thermocline waters entering the subtropical gyre of the Indian Ocean are examined. A Lagrangian analysis is performed on an eddy-admitting simulation of the Global Ocean performed by the DRAKKAR Group (NEMO/OPA), which captures the main observed features. We trace the subducted mode water’s pathways, identify their formation regions and trace whether their source waters come from the Atlantic, Pacific or Indian sectors of the Southern Ocean. Three main sites for mode waters ventilation in the Indian sector are identified with different circulation pathways and source water masses: (a) just north of Kerguelen, where 4.2 Sv of lighter Subantarctic Mode Waters (SAMW); σ ₀ ∼ 26.5) are exported—originating in the Atlantic and Agulhas Retroflection regions; (b) SW of Australia, where 6.5 Sv of medium SAMW (σ ₀ ∼ 26.6) are ventilated—originating in the southern and denser Agulhas Retroflection region; (c) SW of Tasmania and along the South Australian coast, where 3 Sv of denser SAMW (σ ₀ ∼ 26.75) are ventilated—originating from three sources: Leeuwin Current waters, Tasman Sea (Pacific) waters and Antarctic Surface Waters. In all cases, modelled mode waters were last ventilated in the Indian Ocean just north of the deepest winter-mixed layers. For the waters subducted SW of Australia, the last ventilation site extends even further north. Waters ventilated in the deepest mixed layers north of the Subantarctic Front are then re-ventilated 5 years later southwest of Australia. The model results raise new hypotheses that revisit the classical picture of the SAMW formation and transformation, where a large homogeneous mixed layer is subducted and ‘slides’ equatorward, essentially maintaining the T/S characteristics acquired at the surface. Firstly, the last ventilation of the modelled mode waters is not in the region of the deepest mixed layers, as previously thought, but further north in regions of moderate meso-scale eddy activity. Secondly, the model shows for the first time a significant source region for Indian Ocean mode waters coming from deep winter-mixed layers along the south Australian coast. Finally, this analysis shows how the mode water characteristics are modified after subduction, due to internal eddy mixing. The simulation shows that resolved eddies have a strong impact on the mixed layer properties and that isopycnal eddy mixing also contributes to the generation of more homogeneous mode water characteristics in the interior.     

Coastal habitat degradation and green sea turtle diets in Southeastern Brazil

To show the influence of coastal habitat degradation on the availability of food for green turtles (Chelonia mydas), we assessed the dietary preferences and macroalgae community at a feeding area in a highly urbanized region. The area showed low species richness and was classified as degraded. We examined stomach contents of 15 dead stranded turtles (CCL = 44.0 cm (SD 6.7 cm)). The diet was composed primarily of green algae Ulva spp. (83.6%). In contrast, the macroalgae community was dominated by the green alga Caulerpa mexicana. We found a selection for red algae, seagrass and Ulva spp., and avoidance for C. mexicana and brown alga Dictyopteris delicatula. The low diversity of available food items, possibly a result of environmental degradation, likely contributed to the low dietary diversity. The nutritional implications of this restricted diet are unclear.     

Distributions of microcanonical cascade weights of rainfall at small timescales

Empirical frequency distributions of multiplicative cascade weights, or breakdown coefficients, at small timescales are analyzed for 5-min precipitation time series from four gauges in Germany. It is shown that histograms of the weights, W, are strongly deformed by the recording precision of rainfall amounts. A randomization procedure is proposed to statistically remove the artifacts due to precision errors in the original series. Evolution of the probability distributions of W from beta-like for large timescales to combined beta-normal distribution with a pronounced peak at W ≈ 0.5 for small timescales is observed. A new 3N-B distribution built from 3 separate normal, N, distributions and one beta, B, distribution is proposed for reproduction of the empirical histograms of W at small timescales. Parameters of the 3N-B distributions are fitted for all gauges and analyzed timescales. Microcanonical cascades models with a generator based on 3N-B distributions are developed and their performance at disaggregating precipitation at 1280-min intervals down to 5-min intervals is evaluated.     

Seafloor seismic acquisition using autonomous underwater vehicles

Although narrow-azimuth towed-streamer data provide good image quality for structural interpretation, it is generally accepted that for wide-azimuth marine surveys seabed receivers deliver superior seismic reflection measurements and seismically derived reservoir attributes. However, seabed surveys are not widely used due to the higher acquisition costs when compared to streamer acquisition. In recent years, there have been significant engineering efforts to automate receiver deployment and retrieval in order to minimize the cost differential and conduct cost-efficient seabed receiver seismic surveys. These engineering efforts include industrially engineered nodes, nodes on a rope deployment schemes and even robotic nodes, which swim to and from the deployment location. This move to automation is inevitable, leading to robotization of seismic data acquisition for exploration and development activities in the oil and gas industry. We are developing a robotic-based technology, which utilizes autonomous underwater vehicles as seismic sensors without the need of using a remotely operated vehicle for deployment and retrieval. In this paper, we describe the autonomous underwater vehicle evolution throughout the project years from initial heavy and bulky nodes to fully autonomous light and flexible underwater receivers. Results obtained from two field pilot tests using different generations of autonomous underwater vehicles indicate that the seismic coupling, and navigation based on underwater acoustics are very reliable and robust.     

Mitigating the effects of sand dunes on seismic data from the Rub al Khali basin,Saudi Arabia

The Rub Al Khali region in Saudi Arabia is characterized by the presence of sand dunes separated by salt flats, also called Sabkhas. In general, the elevation of dunes in this region varies between 90 and 250 m above sea level. The presence of these sand dunes, along with the rapidly changing surface topography poses challenges for seismic data acquisition and processing. The high contrast in acoustic impedance between the dune base and the underlying formation often results in amplification of seismic waves that are recorded at stations located on the surface of sand dunes. Attempts to address the issue using conventional surface-consistent amplitude scaling methods without reducing these amplification effects generally fail, thus compromising the suitability of the processed data for amplitude versus offset analysis. In this study, we propose a new reference site technique to reduce the effects of sand dune amplification, enabling the production of data sets that are suitable for amplitude versus offset processing. The proposed technique uses a deterministic approach to derive surface-consistent, frequency-dependent de-amplification functions for shots and stations located on the dunes only. Two-dimensional synthetic and field data examples show that the technique significantly reduces the effects of sand dune amplification.     

Complex origin for the south-western Zamboanga metamorphic basement complex, Western Mindanao, Philippines

Abstract Amphibolites unconformably overlain by a metasedimentary sequence of quartz-muscovite-feldspar-kyanite schists, metagraywackes and epidote-bearing amphibolites occur in the northern portion of the south-western Zamboanga metamorphic basement complex, western Mindanao. These amphibolites (here identified as the Mount Dansalan amphibolites) display relict magmatic textures inherited from cumulate gabbro protoliths. Bulk-rock major and trace-element data are consistent with this hypothesis. Together with the chemistry of relict igneous clinopyroxenes, they indicate a magmatic arc-related signature for the gabbro protoliths. Geochemical data allow us to identify various sources for the associated metasediments: the gabbro themselves for the metagraywackes and a continental basement for the quartz-muscovite-feldspar-kyanite schists. Both sources contributed to the genesis of the epidote-amphibolite metasediments. The compositions of the metamorphic mineral assemblages suggest that the rocks have undergone metamorphism at temperatures ranging from 550°C to 700°C and pressures probably in the range of 5–9 kbar. ⁴⁰K–⁴⁰Ar isotopic study of amphibole separates from the Mount Dansalan samples document a metamorphic event dated at 24.6 ± 1.4, 22.2 ± 1.4 and 21.2 ± 1.2 Ma. Our results are in agreement with plate tectonic models which describe the south-western Zamboanga metamorphic basement as a continental terrane. However, its evolution was not as simple as it was usually considered. In particular the basement incorporated slivers of magmatic arc crust, which cannot be unambiguously related to any of the Tertiary arcs documented in the area.