How does micropetrography help us to understand the permeability and poromechanical behaviour of a rock?

Many poromechanical studies of rocks give little regard to the micropetrographic observation of their constituents. The aim of this study is to show how such a detailed study can help understand and provide more precision on the poromechanical behaviour of the material. The rock studied here is an oolitic limestone. Micropetrography reveals the nature of the constituents (calcite, mostly in the form of fine‐grained micrite), their abundance, their organization (micrite organized in ooids linked by a calcitic cement, small‐sized highly connected isotropic porosity, scarce unconnected porosity) and the structure of the rock (global isotropy, small heterogeneities due to sedimentological phenomena, no microcracks). Micropetrography completes the information obtained by poromechanics in that it allows the observation of elements deduced from macroscopical tests. The aim of this paper is to show the effect of microporosity on permeability and flow in a rock where microporous grains are in contact with each other.     

GENESIS OF THE CUMULATE EUCRITES SERRA DE MAGÉ AND MOORE COUNTY: A GEOCHEMICAL STUDY

Major, minor and trace element abundances have been determined by instrumental neutron activation analysis (INAA) in whole rock and plagioclase separates of Serra de Magé (SdM). The whole rock contains 52% normative plagioclase and its chondritic normalized REE abundance pattern shows a large Eu anomaly, dominated by the plagioclase REE distribution, and nearly unfractionated La-Sm and Sm-Lu abundances. The plagioclase separates contained ～ 6% pyroxenes and exhibited a typical plagioclase REE distribution. The REE abundances in the derivative equilibrium magmas from which SdM and Moore County (MC) plagioclases crystallized have been estimated from the plagioclase data and the plagioclase mineral/liquid partition coefficients. The REE distributions in possibly earlier parental magmas were calculated by assuming that various degrees of plagioclase and pigeonite (plagioclase/pigeonite = 1) fractional crystallization had been operative prior to the crystallization of SdM and MC. The calculated La/Sm and Sm/Yb ratios for the earlier magmas are essentially the same as the equilibrium magmas over a wide range (10–95%) of the assumed fractional crystallization. Considering the REE distributions and the Fe/Fe+Mg ratios, calculation shows that there is no simple genetic relationship between MC and SdM via fractional crystallization processes. A hypothesis for the derivation of these cumulate eucrites in the plutonic environment from residual diogenitic liquid, which was produced by the extensive partial melting of an eucritic source material followed by the crystallization of diogenite, also fails to account for the fractionated REE patterns calculated for the equilibrium and the possible parental magmas for either SdM or MC. Equilibrium non-modal partial melting calculations indicate that SdM and MC could be genetically related by a factor ～ 6 difference in the degrees of partial melting from a similar source material. However, this common source material which should contain > 30% high-Ca clinopyroxene and has a chondritic normalized La/Yb ～ 3, is different than that proposed for the non-cumulate eucrites.     

Effects of 12 years' operation of a sewage treatment plant on trace metal occurrence within a Mediterranean commercial sponge (Spongia officinalis, Demospongiae)

The present field study uses Spongia officinalis for assessing trace metals occurrence in time and space within Mediterranean rocky communities. Nine sites were selected in the Marseille area for studying spatial trends in 12 metal concentrations. Long term changes in 8 metal concentrations were assessed at sites that had been sampled before and 12 years after the opening of a treatment plant. Spongia officinalis highly concentrated all the trace metal surveyed excepted Hg and Cd. The overall contamination level registered provided a classification of the study sites which is congruent with that given by other studies on pollutant accumulation in neighbouring sandy-bottoms or benthic assemblages. Among the metals studied, Fe, Pb, Cr are those that best highlighted a pollution gradient. In the present study, only Cd concentration did not vary in space. Except for Ni, all pollutant concentrations clearly decreased between 1984 and 1999. This very impressive decrease in heavy metal concentrations within the Marseille area represents an indisputable evidence of the improvement of the seawater quality resulting from 12 years' operation of the Marseille sewage plant. Moreover, the significant decrease also recorded in the reference population at Port-Cros might reflect an overall improvement in the seawater quality of the NW Mediterranean.     

Yaxcopoil-1 and the Chicxulub impact

CSDP core Yaxcopoil-1 was drilled to a depth of 1,511 m within the Chicxulub crater. An organic-rich marly limestone near the base of the hole (1,495 to 1,452 m) was deposited in an open marine shelf environment during the latest Cenomanian (uppermost Rotalipora cushmani zone). The overlying sequence of limestones, dolomites and anhydrites (1,495 to 894 m) indicates deposition in various carbonate platform environments (e.g., sabkhas, lagoons). A 100-m-thick suevite breccia (894–794 m) identifies the Chicxulub impact event. Above the suevite breccia is a dolomitic limestone with planktic foraminiferal assemblages indicative of Plummerita hantkeninoides zone CF1, which spans the last 300 ky of the Maastrichtian. An erosional surface 50 cm above the breccia/dolomite contact marks the K/T boundary and a hiatus. Limestones above this contact contain the first Tertiary planktic foraminifera indicative of an upper P. eugubina zone P1a(2) age. Another hiatus 7 cm upsection separates zone P1a(2) and hemipelagic limestones of planktic foraminiferal Zone P1c. Planktic foraminiferal assemblages of Zone Plc to P3b age are present from a depth of 794.04 up to 775 m. The Cretaceous carbonate sequence appears to be autochthonous, with a stratigraphic sequence comparable to late Cretaceous sediments known from outside the Chicxulub crater in northern and southern Yucatan, including the late Cenomanian organic-rich marly limestone. There is no evidence that these sediments represent crater infill due to megablocks sliding into the crater, such as major disruption of sediments, chaotic changes in lithology, overturned or deep dipping megablocks, major mechanical fragmentation, shock or thermal alteration, or ductile deformation. Breccia units that are intercalated in the carbonate platform sequence are intraformational in origin (e.g., dissolution of evaporites) and dykes are rare. Major disturbances of strata by the impact therefore appear to have been confined to within less than 60 km from the proposed impact center. Yaxcopoil-1 may be located outside the collapsed transient crater cavity, either on the upper end of an elevated and tilted horst of the terrace zone, or even outside the annular crater cavity. The Chicxulub site thus records a large impact that predates the K/T boundary impact and mass extinction.     

Nouvelles données sur le téphra de Sarliève et le téphra CF7, marqueurs chrono-stratigraphiques de Grande Limagne (Massif central,France)

A trachytic tephra, discovered in the ancient lake of Sarliève, ‘Grande Limagne’, has been dated using the thermoluminescence technique. The obtained age, 16±4 ka ($\text{2}\text{σ}$), is older than that of the trachytic volcanoes of the Cha??ne des Puys, the ashes of which have already been locally recognised in the region. Its analysis confirms its originality. In the course of the comparisons made to search for its spring, it appears that the wide-dispersion tephra CF7, beforehand correlated by hypothesis to the Puy de Clierzou, probably originates from the Kilian crater or the Puy de Vasset. To cite this article: D. Miallier et al., C. R. Geoscience 336 (2004).     

Water sorption on martian regolith analogs: Thermodynamics and near-infrared reflectance spectroscopy

The near-infrared reflectance spectra of the martian surface present strong absorption features attributed to hydration water present in the regolith. In order to characterize the relationships between this water and atmospheric vapor and decipher the physical state of water molecules in martian regolith analogs, we designed and built an experimental setup to measure near-IR reflectance spectra under martian atmospheric conditions. Six samples were studied that cover part of the diversity of Mars surface mineralogy: a hydrated ferric oxide (ferrihydrite), two igneous samples (volcanic tuff, and dunite sand), and three potential water rich soil materials (Mg-sulfate, smectite powder and a palagonitic soil, the JSC Mars-1 regolith stimulant). Sorption and desorption isotherms were measured at 243 K for water vapor pressure varying from 10⁻⁵ to ∼0.3 mbar (relative humidity: 10⁻⁴ to 75%). These measurements reveal a large diversity of behavior among the sample suite in terms of absolute amount of water adsorbed, shape of the isotherm and hysteresis between the adsorption and desorption branches. Simultaneous in situ spectroscopic observations permit a detailed analysis of the spectral signature of adsorbed water and also point to clear differences between the samples. Ferric (oxy)hydroxides like ferrihydrite or other phases present in palagonitic soils are very strong water adsorbent and may play an important role in the current martian water cycle by allowing large exchange of water between dust-covered regions and atmosphere at diurnal and seasonal scales.     

Accessory mineral U–Th–Pb ages and <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar eruption chronology,and their bearing on rhyolitic magma evolution in the Pleistocene Coso volcanic field,California

We determined Ar/Ar eruption ages of eight extrusions from the Pleistocene Coso volcanic field, a long-lived series of small volume rhyolitic domes in eastern California. Combined with ion-microprobe dating of crystal ages of zircon and allanite from these lavas and from granophyre geothermal well cuttings, we were able to track the range of magma-production rates over the past 650 ka at Coso. In ≤230 ka rhyolites we find no evidence of protracted magma residence or recycled zircon (or allanite) from Pleistocene predecessors. A significant subset of zircon in the ~85 ka rhyolites yielded ages between ~100 and 200 Ma, requiring that generation of at least some rhyolites involves material from Mesozoic basement. Similar zircon xenocrysts are found in an ~200 ka granophyre. The new age constraints imply that magma evolution at Coso can occur rapidly as demonstrated by significant changes in rhyolite composition over short time intervals (≤10’s to 100’s ka). In conjunction with radioisotopic age constraints from other young silicic volcanic fields, dating of Coso rhyolites highlights the fact that at least some (and often the more voluminous) rhyolites are produced relatively rapidly, but that many small-volume rhyolites likely represent separation from long-lived mushy magma bodies.     

Experimental calibration of oxygen isotope fractionation between quartz and zircon

We report the results of an experimental calibration of oxygen isotope fractionation between quartz and zircon. Data were collected from 700 to 1000 °C, 10–20 kbar, and in some experiments the oxygen fugacity was buffered at the fayalite–magnetite–quartz equilibrium. Oxygen isotope fractionation shows no clear dependence on oxygen fugacity or pressure. Unexpectedly, some high-temperature data (900–1000 °C) show evidence for disequilibrium oxygen isotope partitioning. This is based in part on ion microprobe data from these samples that indicate some high-temperature quartz grains may be isotopically zoned. Excluding data that probably represent non-equilibrium conditions, our preferred calibration for oxygen isotope fractionation between quartz and zircon can be described by:

This relationship can be used to calculate fractionation factors between zircon and other minerals. In addition, results have been used to calculate WR/melt–zircon fractionations during magma differentiation. Modeling demonstrates that silicic magmas show relatively small changes in δ¹⁸O values during differentiation, though late-stage mafic residuals capable of zircon saturation contain elevated δ¹⁸O values. However, residuals also have larger predicted melt–zircon fractionations meaning zircons will not record enriched δ¹⁸O values generally attributed to a granitic protolith. These results agree with data from natural samples if the zircon fractionation factor presented here or from natural studies is applied.     

A chemical and thermodynamic model of oil generation in hydrocarbon source rocks

Thermodynamic calculations and Gibbs free energy minimization computer experiments strongly support the hypothesis that kerogen maturation and oil generation are inevitable consequences of oxidation/reduction disproportionation reactions caused by prograde metamorphism of hydrocarbon source rocks with increasing depth of burial.These experiments indicate that oxygen and hydrogen are conserved in the process.Accordingly, if water is stable and present in the source rock at temperatures ?25 but ?100 °C along a typical US Gulf Coast geotherm, immature (reduced) kerogen with a given atomic hydrogen to carbon ratio (H/C) melts incongruently with increasing temperature and depth of burial to produce a metastable equilibrium phase assemblage consisting of naphthenic/biomarker-rich crude oil, a type-II/III kerogen with an atomic hydrogen/carbon ratio (H/C) of ∼1, and water. Hence, this incongruent melting process promotes diagenetic reaction of detritus in the source rock to form authigenic mineral assemblages.However, in the water-absent region of the system CHO (which is extensive), any water initially present or subsequently entering the source rock is consumed by reaction with the most mature kerogen with the lowest H/C it encounters to form CO₂ gas and a new kerogen with higher H/C and O/C, both of which are in metastable equilibrium with one another.This hydrolytic disproportionation process progressively increases both the concentration of the solute in the aqueous phase, and the oil generation potential of the source rock; i.e., the new kerogen can then produce more crude oil.Petroleum is generated with increasing temperature and depth of burial of hydrocarbon source rocks in which water is not stable in the system CHO by a series of irreversible disproportionation reactions in which kerogens with higher (H/C)s melt incongruently to produce metastable equilibrium assemblages consisting of crude oil, CO₂ gas, and a more mature (oxidized) kerogen with a lower H/C which in turn melts incongruently with further burial to produce more crude oil, CO₂ gas, and a kerogen with a lower H/C and so forth.The petroleum generated in the process progresses from heavy naphthenic crude oils at low temperatures to mature petroleum at ∼150 °C. For example, the results of Computer Experiment 27 (see below) indicate that the overall incongruent melting reaction in the water-absent region of the system C-H-O at 150 °C and a depth of ∼4.3 km of an immature type-II/III kerogen with a bulk composition represented by C₂₉₂H₂₈₈O_12(c) to produce a mature (oxidized) kerogen represented by C₁₂₈H₆₈O_7(c), together with a typical crude oil with an average metastable equilibrium composition corresponding to C_8.8H_16.9 (C_8.8H_16.9(l)) and CO₂ gas (CO_2(g)) can be described by writing

(A)     

Sediment transport at the network scale and its link to channel morphology in the braided Vjosa River system

In this article we apply the CASCADE network-scale sediment connectivity model to the Vjosa River in Albania. The Vjosa is one of the last unimpaired braided rivers in Europe and, at the same time, a data scarce environment, which limits our ability to model how this pristine river might respond to future human disturbance. To initialize the model, we use remotely sensed data and modeled hydrology from a regional model. We perform a reach-by-reach optimization of surface grain size distribution (GSD) and bedload transport capacity to ensure equilibrium conditions throughout the network. In order to account for the various sources of uncertainty in the calculation of transport capacity, we performed a global sensitivity analysis. The modeled GSD distributions generated by the sensitivity analysis generally match the six GSDs measured at different locations within the network. The modeled bedload sediment fluxes increase systematically downstream, and annual fluxes at the outlet of the Vjosa are well within an order of magnitude of fluxes derived from previous estimates of the annual suspended sediment load. We then use the modeled sediment fluxes as input to a set of theoretically derived functions that successfully discriminate between multi-thread and single-thread channel patterns. This finding provides additional validation of the model results by showing a clear connection between modeled sediment concentrations and observed river morphology. Finally, we observe that a reduction in sediment flux of about 50% (e.g., due to dams) would likely cause existing braided reaches to shift toward single thread morphology. The proposed method is widely applicable and opens a new avenue for application of network-scale sediment models that aid in the exploration of river stability to changes in water and sediment fluxes.