On the potential for CO2 mineral storage in continental flood basalts - PHREEQC batch- and 1D diffusion-reaction simulations

ABSTRACT: Continental flood basalts (CFB) are considered as potential CO2 storage sites because of their high reactivity and abundant divalent metal ions that can potentially trap carbon for geological timescales. Moreover, laterally extensive CFB are found in many place in the world within reasonable distances from major CO2 point emission sources.Based on the mineral and glass composition of the Columbia River Basalt (CRB) we estimated the potential of CFB to store CO2 in secondary carbonates. We simulated the system using kinetic dependent dissolution of primary basalt-minerals (pyroxene, feldspar and glass) and the local equilibrium assumption for secondary phases (weathering products). The simulations were divided into closed-system batch simulations at a constant CO2 pressure of 100?bar with sensitivity studies of temperature and reactive surface area, an evaluation of the reactivity of H2O in scCO2, and finally 1D reactive diffusion simulations giving reactivity at CO2 pressures varying from 0 to 100?bar.Although the uncertainty in reactive surface area and corresponding reaction rates are large, we have estimated the potential for CO2 mineral storage and identified factors that control the maximum extent of carbonation. The simulations showed that formation of carbonates from basalt at 40?C may be limited to the formation of siderite and possibly FeMg carbonates. Calcium was largely consumed by zeolite and oxide instead of forming carbonates. At higher temperatures (60 - 100?C), magnesite is suggested to form together with siderite and ankerite. The maximum potential of CO2 stored as solid carbonates, if CO2 is supplied to the reactions unlimited, is shown to depend on the availability of pore space as the hydration and carbonation reactions increase the solid volume and clog the pore space. For systems such as in the scCO2 phase with limited amount of water, the total carbonation potential is limited by the amount of water present for hydration of basalt.     

Delineation of small-scale landforms relative to flood inundation in the western Red River delta, northern Vietnam using remotely sensed data

Flood susceptibility mapping using geomorphologic approaches is effective for delineating flood extent and various degrees of potential flood-affected areas. This approach is useful where the channel system and floodplain morphology change dynamically and in regions where detailed digital elevation models are not available. The first important step in flood zonation using this approach is detailed geomorphologic mapping, also called landform classification. This study aims to describe landform classification using the rule-based method of Ho et al. (Int J Geoinform 8(4):27–38, 2012) adapted to local characteristics in the western plain of the Red River delta, northern Vietnam. The original classification scheme is generally based on the moist condition classification, local land-surface parameters, and relative position indices derived from multi-temporal Landsat data and a shuttle radar topographic mission digital elevation model (SRTM DEM). This study uses average elevations and the standard deviation of elevations as local land-surface parameters rather than local relief, which was used in the study by Ho et al. (Int J Geoinform 8(4):27–38, 2012). Multi-temporal land cover classification was performed using an integrated method to effectively correct the SRTM DEM. The overall classification is consistent with manual mapping by visual comparison. The quantitative comparison between landform units and past flood-affected areas demonstrates a precise boundary delineation of landform objects using this method. The high agreement between the boundaries of landform units and flood-inundated areas suggests the applicability of this method taking advantage of readily available remotely sensed datasets in alluvial floodplains.     

Spathian to Aegean (upper Lower Triassic to lower Middle Triassic) carbon isotope stratigraphy constrained by the conodont biostratigraphy of carbonates on top of a mid-oceanic seamount formed in the Panthalassic Ocean

The Taho Formation in western Shikoku Island, Japan, consists of Triassic carbonates that formed on a seamount in the Panthalassic Ocean. In order to investigate the stratigraphy and paleoceanography of this carbonate succession, we analyzed the biostratigraphy and chemostratigraphy of a 17.6 m-thick section of the upper Taho Formation at the stratotype area in Tahokamigumi, Seiyo City. This section comprises bioclastic limestone containing Triassic bivalves, ammonoids, and conodonts. We recognized six conodont zones (in ascending order): the Novispathodus pingdingshanensis, Novispathodus brevissimus, Triassospathodus symmetricus, Triassospathodus homeri, Chiosella timorensis, and Magnigondolella cf. alexanderi zones. Thus, the studied carbonate succession is latest Smithian to Aegean in age. A δ¹³C profile of this section shows elevated values during the lowest Spathian followed by a gradual negative excursion, a subsequent positive excursion near the Spathian–Aegean boundary, and relatively constant values during the Aegean. The characteristic series of negative and positive excursions correlates with other δ¹³C records for this period, including the peak of the upper Smithian–lowest Spathian positive excursion (P3), lower to middle Spathian negative excursion (N4), and middle Spathian–lowest Aegean positive excursion (P4). This represents a new high-resolution Spathian–Aegean δ¹³C record of the Panthalassic Ocean, for which ages are constrained by conodont biostratigraphy. The Taho δ¹³C profile exhibits a consistent positive offset of ~2 ‰ as compared with those from other regions (i.e., mostly in the Tethyan Ocean). This can be explained by preferential removal of ¹²C from seawater during photosynthesis and calcification by marine organisms over the platform, and/or the relatively high δ¹³C values of dissolved inorganic carbon in the Panthalassic Ocean due to less influence of ¹²C-enriched terrestrial waters and high marine organic production/burial as compared with the more restricted Tethyan Ocean.     

Proposed methods for potential evapotranspiration calculation of the Red River basin (North Vietnam)

Potential evapotranspiration (ETP) is an important part of a climatic water balance and a crucial variable in many kinds of models in computing actual evapotranspiration. The objective of this study was to find a reasonable approach of ETP calculation for a height‐differentiated landscape in subtropical climate. From the pool of diverse approaches, six common methods [Hamon, Priestley–Taylor, Thornthwaite, Blaney–Criddle, Turc and Food and Agricultural Organization Irrigation and Drainage Paper No. 56 (FAO‐56)] were selected. With the meteorological data for long‐term period (1964–2008), the calculation of ETP values was performed for 12 different meteorological stations in the Red River basin. Among the applied ETP calculation methods, the Turc and the FAO‐56 methods agreed well at most stations and represent best the expectations for the ETP values of the Thao and Da subbasins. The findings of our investigations indicate that in highly structured (land use and elevation) regions, not all methods provide satisfying results. Copyright © 2011 John Wiley & Sons, Ltd.     

Use of stable isotopes to understand run‐off generation processes in the Red River Delta

This paper presents the use of stable isotopes of water for hydrological characterization and flow component partitioning in the Red River Delta (RRD), the downstream section of the Red River. Water samples were collected monthly during 2015 from the mainstream section of the river and its right bank tributaries flowing through the RRD. In general, δ¹⁸O and δ²H river signatures were depleted in summer–autumn (May–October) and elevated in winter–spring (November–April), displaying seasonal variation in response to regional monsoon air mass contest. The Pacific equatorial–maritime air mass dominates in summer and the northern Asia continental air mass controls in winter. Results show that water of the RRD tributaries stems solely from local sources and is completely separated from water arriving from upstream subbasins. This separation is due to the extensive management of the RRD (e.g., dykes and dams) for the purposes of irrigation and inundation prevention. Mainstream river section δ¹⁸O and δ²H compositions range from ?10.58 and ?73.74‰ to ?6.80 and ?43.40‰, respectively, and the corresponding ranges inside the RRD were from ?9.35 and ?64.27‰ to ?2.09 and ?15.80‰. A combination of data analysis and hydrological simulation confirms the role of upstream hydropower reservoirs in retaining and mixing upstream water. River water inside the RRD experienced strong evaporation characterized by depleted d‐excess values, becoming negative in summer. On the other hand, the main stream of the Red River has d‐excess values around 10‰, indicating moderate evaporation. Hydrograph separation shows that in upstream subbasins, the groundwater fraction dominates the river flow composition, especially during low flow regimes. Inside the RRD, the river receives groundwater during the dry season, whereas groundwater replenishment occurs in the rainy season. Annual evaporation obtained from this hydrograph separation computation was about 6.3% of catchment discharge, the same order as deduced from the difference between subbasin precipitation and discharge values. This study shows the necessity to re‐evaluate empirical approaches in large river hydrology assessment schemes, especially in the context of climate change.     

Mercury concentration in ecosystem components in water bodies and streams in Khanh Hoa province (Central Vietnam)

Total mercury concentration in water, seston, soils, and muscle tissues of fish in water bodies in Khan Hoa province was determined. Hg concentration in water does not exceed 40 ng/l. It migrates in water mostly in dissolved form. Hg concentration in soils of the examined water bodies varies from 0.01 to 0.05 mg/(kg dry mass) and that in the muscle tissues of fish on the average does not exceed 1.4 mg/(kg dry mass).     

Estimates of the accuracy of vertically extrapolated forecast errors: Isobaric height and temperature

Abstract

Study of vertical extrapolations of the errors in forecast values of pressure‐level heights and temperatures indicates that they do not provide accurate off‐level information. Indeed it appears that, above 850 mb, forecast errors interpolated from observed 1000‐mb values are less accurate than level‐specific monthly mean differences. These results suggest that the de facto function of vertically interpolated single‐level forecast errors, in numerical forecast model updating, is the provision of vertical consistency rather than the injection of time‐specific information – except at the level of observation.     

Geochemistry and petrogenesis of carbonatites from South Nam Xe,Lai Chau area,northwest Vietnam

This paper presents a study of the petrography, mineral chemistry, geochemistry, and Sr–Nd–Pb–C–O isotope systematics of carbonatite dykes and associated rocks from the northeastern part of the Song Da intracontinental rift in South Nam Xe (northwest Vietnam) aimed at constraining the origin of the carbonatite magmas. The carbonatites are characterized by SiO₂ < 12.18 wt.% and by wide ranges in FeO, MgO and CaO content that define them as calciocarbonatite and ferrocarbonatite. On U–Th–Pb isochron diagrams, whole rocks and mineral separates from the ferrocarbonatites form linear arrays corresponding to ages of 30.2–31.6 Ma (Rupelian, Oligocene). The South Nam Xe carbonatites are extremely enriched in Sr, Ba, and light rare earth elements (LREE), and depleted in high field strength elements (HFSE) (e.g. Ti, Nb, Ta, Zr and Hf). The age–corrected Sr–Nd–Pb isotope ratios and C isotope data are relatively uniform (⁸⁷Sr/⁸⁶Sr_(t) = 0.708193–0.708349; ¹⁴³Nd/¹⁴⁴Nd_(t) = 0.512250–0.512267; ε_Nd(t) = ?6.46 to ?6.80; ²⁰⁶Pb/²⁰⁴Pb_(t) = 18.26–18.79; ²⁰⁷Pb/²⁰⁴Pb_(t) = 15.62–15.64; ²⁰⁸Pb/²⁰⁴Pb_(t) = 38.80–39.38; δ¹³C_V-PDB = –2.7?‰ to ?4.1?‰). These isotopic compositions indicate source contamination that occurred before the production of the carbonatite magmas, and did not change noticeably during or after emplacement. The variation in oxygen isotopes is consistent with the change in mineral compositions and trace element abundances: the lower δ¹⁸O values (9.1–11.0?‰) coupled with Sr-rich, Mn-poor calcite, and igneous textures such as triple junctions among calcite grain boundaries, define a magmatic origin. However, the elevated δ¹⁸O values of the ferrocarbonatites (12.0–13.3?‰) coupled with a volatile-bearing mineral assemblages (including REE fluorcarbonates, sulfates, sulfides and fluorite) may be due to interaction with meteoric water during low-temperature alteration. High δ¹³C values and Sr–Pb ratios, and low Rb/Sr (0.00014–0.00301), Sm/Nd (0.089–0.141) and ¹⁴³Nd/¹⁴⁴Nd ratios, coupled with very high Sr-Nd concentrations, suggest the involvement of an enriched mantle component, which probably resulted from metasomatism due to the migration of subducted material. Because of the lack of tectonic data and the limited number of samples studied, this conclusion is still ambiguous and requires further study.     

Imaging with Amber/VLTI: the case of microjets

The engine that powers pre-main-sequence micro-jets is still unknown and remains a fundamental open question in star formation. The engine can be located solely on the inner disk or in the interaction of the inner disk with the star. In order to ease interpretation problems, imaging the jet engine is the ideal probe to disentangle between the old models and shed evidence for new ones. In this paper, we analyse the feasability of imaging bright southern targets, and show that even at low SNR, accurate image reconstructionis still possible with high contrast. However, the small number of ATs requires a fast reconfigurable array. This revised version was published online in July 2006 with corrections to the Cover Date.     

Starch-assisted sol–gel synthesis of magnetic CuFe<Subscript>2</Subscript>O<Subscript>4</Subscript> powder as photo-Fenton catalysts in the presence of oxalic acid

Magnetic photo-Fenton catalysts based on spinel CuFe₂O₄ were successfully prepared by the starch-assisted sol–gel method. Various synthetic conditions such as annealing temperatures (700, 800 and 900 °C) and molar ratios of Cu²⁺/Fe³⁺/C₆H₁₀O₅ in the precursor solution (from 1:2:2 to 1:2:4) were, respectively, used in order to study the influences of annealing temperatures and precursor starch contents on the magnetic and catalytic properties of CuFe₂O₄ powders. The photo-Fenton catalytic activity was evaluated via the degradation of methylene blue under ultraviolet and visible irradiation with H₂C₂O₄ as a new oxidizing agent. According to the results, when the annealing temperature increased to 800 °C, the spinel CuFe₂O₄ phase amount was increased, which strongly enhances the photo-Fenton catalytic performance. However, above 800 °C, the catalytic activity was reduced, due to the increase in particle size. The starch content also affected the surface Cu²⁺ content and the particle size of catalysts. The catalyst prepared at 800 °C with the molar Cu²⁺/Fe³⁺/C₆H₁₀O₅ ratio of 1:2:3 presented the best photo-Fenton performance, owing to its highest surface Cu²⁺ content. This catalyst also exhibits ferromagnetic properties (saturation magnetization of 25.836 emu/g and coercivity of 1010.23 Oe), which allows them to be easily separated from the solution by a magnet.