Improving the scientific assessment of carbon sinks

Abstract

The future role of carbon sinks with reference to the Kyoto Protocol depends significantly on developing an international consensus on carbon-sink assessment and carbon accounting. A clear and practical approach is needed that allows both the scientific community and policy-makers to construct a viable operational framework. This article proposes that a new strategy be developed for carbon-sink assessment based on full carbon accounting (FCA) alongside a separate political tool for carbon accounting. This approach is derived from the experience of the European critical loads (CL) concept, which seeks to quantify levels of pollutants (such as sulfur) that can be absorbed by the environment without causing ecological harm. Crucial to the implementation of such a strategy are robust institutional settings, such as an internationally coordinated monitoring system, open and fair access to the assessment processes, and international research cooperation programs for addressing associated problems of carbon-sink activities.     

The survivability of phyllosilicates and carbonates impacting Stardust Al foils: Facilitating the search for cometary water

Comet 81P/Wild 2 samples returned by NASA's Stardust mission provide an unequalled opportunity to study the contents of, and hence conditions and processes operating on, comets. They can potentially validate contentious interpretations of cometary infrared spectra and in situ mass spectrometry data: specifically the identification of phyllosilicates and carbonates. However, Wild 2 dust was collected via impact into capture media at ~6 km s^?1, leading to uncertainty as to whether these minerals were captured intact, and, if subjected to alteration, whether they remain recognizable. We simulated Stardust Al foil capture conditions using a two‐stage light‐gas gun, and directly compared transmission electron microscope analyses of pre‐ and postimpact samples to investigate survivability of lizardite and cronstedtite (phyllosilicates) and calcite (carbonate). We find the phyllosilicates do not survive impact as intact crystalline materials but as moderately to highly vesiculated amorphous residues lining resultant impact craters, whose bulk cation to Si ratios remain close to that of the impacting grain. Closer inspection reveals variation in these elements on a submicron scale, where impact‐induced melting accompanied by reducing conditions (due to the production of oxygen scavenging molten Al from the target foils) has resulted in the production of native silicon and Fe‐ and Fe‐Si‐rich phases. In contrast, large areas of crystalline calcite are preserved within the calcite residue, with smaller regions of vesiculated, Al‐bearing calcic glass. Unambiguous identification of calcite impactors on Stardust Al foil is therefore possible, while phyllosilicate impactors may be inferred from vesiculated residues with appropriate bulk cation to Si ratios. Finally, we demonstrate that the characteristic textures and elemental distributions identifying phyllosilicates and carbonates by transmission electron microscopy can also be observed by state‐of‐the‐art scanning electron microscopy providing rapid, nondestructive initial mineral identifications in Stardust residues.     

Extinction curves expected in young galaxies

We investigate the extinction curves of young galaxies in which dust is supplied from Type II supernovae (SNe II) and/or pair instability supernovae (PISNe). We adopt Nozawa et al. (2003) for compositions and size distribution of grains formed in SNe II and PISNe. We find that the extinction curve is quite sensitive to internal metal mixing in supernovae (SNe). The extinction curves predicted from the mixed SNe are dominated by SiO₂ and are characterized by a steep rise from infrared to ultraviolet (UV). The dust from unmixed SNe shows a shallower extinction curve, because of the contribution from large-sized (∼0.1 μm) Si grains. However, the progenitor mass is important in unmixed SNe II: if the progenitor mass is smaller than  ∼20 M_⊙  , the extinction curve is flat in UV; otherwise, the extinction curve rises towards the short wavelength. The extinction curve observed in a high-redshift quasar  ( z = 6.2)  favours the dust production by unmixed SNe II. We also provide some useful observational quantities, so that our model might be compared with future high- z extinction curves.     

A Paleogene magmatic overprint on Cretaceous seamounts of the western Pacific

The West Pacific Seamount Province (WPSP) represents a series of short-lived Cretaceous hotspot tracks. However, no intraplate volcanoes in advance of petit-spot volcanism erupted near a trench have been identified after the formation of the WPSP on the western Pacific Plate. This study reports new ages for Paleogene volcanic edifices within the northern WPSP, specifically the Ogasawara Plateau and related ridges, and Minamitorishima Island. These Paleogene ages are the first reported for basaltic rocks on western Pacific seamounts, in an area that has previously only yielded Cretaceous ages. The newly found Paleogene volcanisms overprint the Early–middle Cretaceous volcanic edifices, because the seamount or paleo-island material-covered reefal limestone caps on these edifices are uniformly older than the Paleogene volcanism identified in this study. This study outlines several possible causative factors for the Paleogene volcanism overprinting onto existing Cretaceous seamounts, including volcanism related to lithospheric stress, or a younger hotspot track within the northern part of the WPSP that records magmatism from ~60 Ma.     

Biomass and estimated production rates of metazoan zooplankton community in a tropical coral reef of Malaysia

Quantitative research on composition, biomass and production rates of zooplankton community is crucial to understand the trophic structure in coral reef pelagic ecosystems. In the present study, micro‐ (35–100 μm) and net‐ (>100 μm) metazooplankton were investigated in a fringing coral reef at Tioman Island of Malaysia. Sampling was done during the day and night in August and October 2004, and February and June 2005. The mean biomass of total metazooplankton (i.e. micro + net) was 3.42 ± 0.64 mg C·m^?3, ranging from 2.32 ± 0.75 mg C·m^?3 in October to 3.26 ± 1.77 mg C·m^?3 in August. The net‐zooplankton biomass exhibited a nocturnal increase from daytime at 131–264% due to the addition of both pelagic and reef‐associated zooplankton into the water column. The estimated daily production rates of the total metazooplankton community were on average 1.80 ± 0.57 mg C·m^?3·day^?1, but this increased to 2.51 ± 1.06 mg C·m^?3·day^?1 if house production of larvaceans was taken into account. Of the total production rate, the secondary and tertiary production rates were 2.20 ± 1.03 and 0.30 ± 0.06 mg C·m^?3·day^?1, respectively. We estimated the food requirements of zooplankton in order to examine the trophic structure of the pelagic ecosystem. The secondary production may not be satisfied by phytoplankton alone in the study area and the shortfall may be supplied by other organic sources such as detritus.     

Trace-element compositions of single fluid inclusions in the Kofu granite, Japan: Implications for compositions of granite-derived fluids

Fluid inclusions in quartz from miarolitic cavities, pegmatites, and quartz veins in Miocene biotite-granite plutons, Kofu, Japan, were analyzed by particle-induced X-ray emission to examine chemistries and behaviors of granite-derived fluids in island-arc granite. Most inclusions are aqueous two-phase inclusions, and halite-bearing polyphase inclusions are also observed in quartz veins in the upper part of the plutons. From element contents of fluid inclusions in the miarolitic cavities, the original fluid released from the granite plutons during solidification is inferred to have concentrations of Mn, Fe, Cu, Zn, Ge, Br, Rb, Pb, and Ba of several tens to hundreds of parts per million by weight (ppm) and a salinity of about 10 wt% NaCl equivalent. We estimated the formation conditions of the fluid to have been at about 1.3–1.9 kb and 530–600°C on the basis of the homogenization temperatures of the inclusions and the solidification conditions of the plutons. The polyphase inclusions probably originated from hypersaline fluid by boiling of part of the released fluid during its ascent in the plutons. The polyphase inclusions contain several hundreds to tens of thousands of ppm of Fe and Mn, and tens to several hundreds of ppm of Cu, Zn, Br, Rb, and Pb. The salinities are about 35 wt% NaCl equivalent. Compositional variations in two-phase inclusions from the miarolitic cavities and quartz veins are primarily explained by mineral precipitation with dilution by surface water exerting a secondary influence. Thus, chemistries and behaviors of the granite-derived fluids in the plutons can be explained by mineral precipitation, boiling, and dilution of the originally released fluid.     

Contributions of slab fluid and sediment melt components to magmatism in the Mariana Arc–Trough system: Evidence from geochemical compositions and Sr,Nd, and noble gas isotope systematics

This study presents new major and trace element, mineral, and Sr, Nd, and noble gas isotope geochemical analyses of basalts, gabbro, and clinopyroxenite from the Mariana Arc (Central Islands and Southern Seamount provinces) including the forearc, and the Mariana Trough (Central Graben and Spreading Ridge). Mantle source compositions beneath the Mariana Arc and the Mariana Trough indicate a mantle source that is depleted in high field strength elements relative to MORB (mid‐oceanic ridge basalt). Samples from the Mariana Arc, characterized by high ratios of Ba/Th, U/Th, ⁸⁴Kr/⁴He and ¹³²Xe/⁴He, are explained by addition of fluid from the subducted slab to the mantle wedge. Correlations of noble gas data, as well as large ion lithophile elements, indicate that heavy noble gases (Ar, Kr, and Xe) provide evidence for fluid fluxing into the mantle wedge. On the other hand, major elements and Sr, Nd, He, and Ne isotopic data of basalts from the Mariana Trough are geochemically indistinguishable from MORB. Correlations of ³He/⁴He and ⁴⁰Ar/³⁶Ar in the Mariana Trough samples are explained by mixing between MORB and atmosphere. One sample from the Central Graben indicates extreme enrichment in ²⁰Ne/²²Ne and ²¹Ne/²²Ne, suggesting incorporation of solar‐type Ne in the magma source. Excess ¹²⁹Xe is also observed in this sample suggesting primordial noble gases in the mantle source. The Mariana Trough basalts indicate that both fluid and sediment components contributed to the basalts, with slab‐derived fluids dominating beneath the Spreading Ridge, and that sediment melts, characterized by high La/Sm and relatively low U/Th and Zr/Nb, dominate in the source region of basalts from the Central Graben.     

Influence of Surface-Based Stable Layer Development on Asian Dust Behaviour Over Tokyo

The relationship between local meteorological fields and the behaviour of airborne Asian dust that arrived in the Tokyo metropolitan area on 1 April 2007 with the passage of a synoptic-scale cold front has been investigated through Doppler lidar observations, experiments using a regional atmospheric numerical model, and analyses of surface and upper-air meteorological observations. Results of the Doppler lidar observations showed that the Asian dust passed above the metropolitan area with strong south-westerly winds with speeds of 15–26 m s⁻¹. Meteorological fields reproduced by the numerical experiments showed the development of a surface-based stable layer in the metropolitan area caused by nocturnal radiational cooling near the ground surface and south-westerly warm air advection at upper levels. The blocking effect of the mountainous region located to the west of the metropolitan area induced an area of stagnant air inside the metropolitan area and promoted the stable layer development. Although strong downdrafts prevailed in the upper air, the airborne Asian dust did not spread to the ground when the stable layer was formed. These results strongly indicate that the developed stable layer prevented strong downdrafts from spreading to the ground, acting as an obstacle to the transport of the Asian dust particles from the upper air towards the ground. This is considered to be one of the main causes of the low appearance frequency of Asian dust phenomena near the ground in the Tokyo metropolitan area and eastern Japan.     

Spectrophotometric scan of comet 1973 XII Kohoutek

Photoelectric spectrophotometric scans of Comet 1973 XII Kohoutek were made on November 25.85 and 28.85 UT, 1973. The vibrational temperature of C₂, the total numbers of CN and of C₂, and the production rates for CN and C₂ are derived from the observed fluxes. The temperature of C₂ was 4900 K on 25.85 November and 4300 K on 28.85 November. Mean abundance ratio of C₂ to CN was about 2.7. From the variation of production rates with heliocentric distance, it is shown that there was an outburst on 25.85 November in both CN and C₂ productions. For C₂, the production rates are derived by using two coma models, i.e. the Haser's parent-daughter model and the model relevant to a proposition of Yamamoto (1981b) that C₂ is formed via two-step photodissociation of its parent molecules. By comparing the production rate derived from the two models, it can be supported that C₂ is formed via two-step photodissociation rather than one-step photodissociation. In consequence, it is shown that the variation of the production rate with heliocentric distance is largely modified compared with that derived from the Haser's model.