Length-specific carbon content of theDaphnia population in a large subalpine lake, Lago Maggiore (Northern Italy): The importance of seasonality

We compared three methods for calculating the standing stock biomass ofDaphnia hyalina galeata population in Lago Maggiore during a single year. We applied body length/carbon regression equations (LCR) obtained under controlled laboratory conditions and directly from field data on carbon and body length to field data on length-specific abundance. Laboratory-derived equations satisfactorily described our field estimates of length-specific carbon content in spring. As the length-standardized carbon content decreased exponentially along the season, we included time of the year as an auxiliary variable, and tested whether it affected slope, intercept or both. The decrease had no effect on slope but reduced the intercept of the LCR. We also calculated biomass, using a single mean value from the literature. By comparing the results with those obtained by simple conversion of individuals number into carbon we might discriminate between the effect of changes in the size frequency distribution of the population and the decrease with time of the length-standardized carbon content. Although we tested the different models for non-ovigerous females, the results did not change when we included also data on females with eggs in the first three developmental stages, whereas they changed substantially when we included females with embryos. We formulate two hypotheses to explain this result and discuss possible implications for the calculation of the standing stock biomass ofDaphnia population.     

The organisation of fish assemblages in the regulated Lima basin, Northern Portugal

In order to understand the structure of fish assemblages in the modified Lima basin (Northern Portugal), two distinct datasets concerning the presence and abundance of fish species were subjected to multivariate analysis. On the River Lima two types of flow modification are present within kilometres of one another: (a) a reduced and constant flow due to hypolimnetic release; and (b) an intense and irregular flow. A comparison of their influence on fish assemblages revealed a gradient of assemblage types from tributaries to main river sites. The latter were characterised by a strong dominance of cyprinids, particularly Iberian barbel (Barbus bocagei). The former harboured two kinds of fish assemblages: those closer to the river mouth were dominated by the cyprinids Iberian chub (Squalius carolitertii) and Iberian nase (Chondrostoma polylepis), which were also frequently present in the main river; while in those further upstream the predominant species was the brown trout (Salmo trutta). Although explanatory variables such as distance from source, altitude, substrate coarseness and width were the primary correlates of fish assemblage composition, dam construction and flow regulation also had a significant effect upon assemblage structure, particularly by: i) reducing the importance of migratory species; ii) constraining the presence of trout in the regulated segments; and iii) simplifying the community, especially in the case of the constant and reduced flow regime.     

Holocene-emerged notches and tectonic uplift along the Jalisco coast, Southwest Mexico

This paper presents the preliminary results from a study of Holocene-emerged shorelines, marine notches, and their tectonic implications along the Jalisco coast. The Pacific coast of Jalisco, SW Mexico, is an active tectonic margin. This coast has been the site of two of the largest earthquakes to occur in Mexico this century: the 1932 (Mw 8.2) Jalisco earthquake and the 1995 (Mw 8.0) Colima earthquake. Measurement and preliminary radiocarbon dating of emergent paleoshorelines along the Jalisco coast provide the first constraints upon the timing for tectonic uplift. Along this coastline, uplifted Holocene marine notches and wave-cut platforms occur at elevations ranging from ca. 1 to 4.5 m amsl. In situ intertidal organisms dated with radiocarbon, the first ever reported for the Jalisco area, provide preliminary results that record tectonic uplift during at least the past 1300 years BP at an average rate of about 3 mm/year. We propose a model in which coseismic subsidence produced by offshore earthquakes is rapidly recovered during the postseismic and interseismic periods. The long-term period is characterized by slow tectonic uplift of the Jalisco coast. We found no evidence of coastal interseismic and long-term subsidence along the Jalisco coast.     

Understory and small trees contribute importantly to stemflow of a lower montane cloud forest

Stemflow (Sf) measurements in tropical rain and montane forests dominated by large trees rarely include the understory and small trees. In this study, contributions of lower (1‐ to 2‐m height) and upper (>2‐m height and <5‐cm diameter at breast height [DBH]) woody understory, small trees (5 < DBH < 10 cm), and canopy trees (>10‐cm DBH) to Sf per unit ground area (Sf_a) of a Mexican lower montane cloud forest were quantified for 32 days with rainfall (P) during the 2014 wet season. Rainfall, stemflow yield (Sf_y), vegetation height, density, and basal area were measured. Subsequently, stemflow funneling ratios (SFRs) were calculated, and three common methods to scale up Sf_y from individual trees to the stand level (tree‐Sf_y correlation, P‐Sf_y correlation, and mean‐Sf_y extrapolation) were used to calculate Sf_a. Understory woody plants, small trees, and upper canopy trees represented 96%, 2%, and 2%, respectively, of the total density. Upper canopy trees had the lowest SFRs (1.6 ± 0.5 Standard Error (SE) on average), although the lower understory had the highest (36.1 ± 6.4). Small trees and upper understory presented similar SFRs (22.9 ± 5.4 and 20.2 ± 3.9, respectively). Different Sf scaling methods generally yielded similar results. Overall Sf_a during the study period was 22.7 mm (4.5% of rainfall), to which the understory contributed 70.1% (15.9 mm), small trees 10.6% (2.4 mm), and upper canopy trees 19.3% (4.4 mm). Our results strongly suggest that for humid tropical forests with dense understory of woody plants and small trees, Sf of these groups should be measured to avoid an underestimation of overall Sf at the stand level.     

Exploring lava‐flow hazards at Pico Island,Azores Archipelago (Portugal)

Pico, the youngest island of the Azores Archipelago (Portugal), is characterized by a central volcano and a 30‐km‐long fissure zone. Its eruption rate is the highest of the Azores islands, with more than 35 eruptions in the last 2000 years. Here, we estimate the lava‐flow hazard for Pico Island by combining the vent opening probability derived from the spatial distribution of eruptive fissures, the classes of expected eruptions inferred from the physical and chemical characteristics of historical eruptions, and the lava‐flow paths simulated by the MAGFLOW model. The most likely area to host new eruptions is along a WNW–ESE trend centred on the central volcano, with the highest hazard affecting the two main residential zones of Lajes do Pico and Madalena. Our analysis is the first attempt to assess the lava‐flow hazard for Pico Island, and may have important implications for decision‐making in territorial management and future land‐use planning.     

Efficacy of laser cleaning in the removal of biological patina on the volcanic scoria of the rock-hewn churches of Lalibela,Ethiopia

The Lalibela rock-hewn churches are one of the most important religious pilgrimage sites in Ethiopia. These churches are carved from the scoriaceous basalt rock substrate, which has been exposed to attack by biological agents with significant loss of surface material. Particularly, the widespread growth of lichens and other microorganisms on the carved surfaces of the churches has proven to represent a substantial threat for the preservation of the site. In this study, laboratory tests have been conducted to assess the feasibility of using laser technology as an efficient cleaning method of biological patina from polymineralic stone substrates. Multi-analytical techniques were applied for the characterization of the stone samples collected from two of the Lalibela churches: Bete Giyorgis and Bete Amanuel. Stone samples artificially inoculated with bacteria, yeast, fungi isolates, and lichen-encrusted samples were laser cleaned using UV and IR laser wavelengths. The high content of Fe and Ti oxides and the high porosity have made the stone surfaces easily susceptible to low-energy laser treatment. Results indicate that laser cleaning can be applied to polymineralic lithotypes and UV irradiation can successfully remove lichen colonies. Further studies need to be conducted to optimize the laser procedure in polymineralic, high porosity stones.     

Rockfall seismic features analysis based on in situ tests:frequency,amplitude, and duration

In the seismic event classification,determining the seismic features of rockfall is significantly important for the automatic classification of seismic events because of the huge amount of raw data recorded by seismic stations in continuous monitoring. At the same time, the rockfall seismic features are still not completely understood.This study concentrates on the rockfall frequency content, amplitude(ground velocity), seismic waveform and duration analysis, of an artificial rockfall test at Torgiovannetto(a former quarry in Central Italy). A total of 90 blocks were released in the test, and their seismic signals and moving trajectories were recorded by four tri-axial seismic stations and four cameras, respectively. In the analysis processing,all the artificial rockfall signal traces were cut separately and the seismic features were extracted individually and automatically. In this study, the relationships between a) frequency content and impacted materials, b) frequency content and the distance between block releasing position and seismic station(source-receiver distance) were discussed. As a result, we found that the frequency content of rockfall focuses on 10-60 Hz and 80-90 Hz within a source-receiver distance of 200 m, and it is well correlated with impacted material and source-receiver distance. To evaluate the difference between earthquake and rockfall, 23 clear earthquake signals recorded in a seven month-long continuous seismic monitoring, carried out with the four seismic stations, were picked out, according to the Italian national earthquakes database(INGV). On these traces we performed the same analysis as in the artificial rockfall traces, and two parameters were defined to separate rockfall events from earthquake noise. The first one, the amplitude ratio, is related to the amplitude variation of rockfall between two stations and is greater than that of earthquakes, because of the higher attenuation occurring for rockfall events, which consists in high frequencies whereas for earthquakes it consists in low frequencies. The other parameter, the shape of waveform of signal trace, showed a significant difference between rockfall and earthquake and that could be a complementary feature to discriminate between both. This analysis of artificial rockfall is a first step helpful to understand the seismic characteristics of rockfall, and useful for rockfall seismic events classification in seismic monitoring of slope.