Geochronology of a composite granitoid pluton: a high-precision ID-TIMS U–Pb zircon study of the Variscan Karkonosze Granite (SW Poland)

Resolving time differences between successive magmatic pulses in composite granitoid plutons is often a difficult task. High-precision CA-ID-TIMS zircon ages obtained from such a pluton, the Variscan Karkonosze Granite (NE part of the Bohemian Massif), provide evidence that the crystallization of the two main granite facies, porphyritic and equigranular, happened between 312.5 ± 0.3 and 312.2 ± 0.3 Ma, thus unresolvable at the 0.08–0.1 % precision level of a single ²⁰⁶Pb/²³⁸U age. This finding is at odds with most other previous dating attempts and asks for a re-evaluation of the previous scattered geochronological data. The main reasons for the scatter of the earlier dates obtained by various techniques can include analytical causes, the presence of older inheritance and disturbance of the U–Pb isotopic system, due to zircon metamictization (enhanced by high-U content in zircon) or late- and post-magmatic alteration.     

Asbestos and other fibrous minerals contained in the serpentinites of the Gimigliano-Mount Reventino Unit (Calabria,S-Italy)

Serpentinites are metamorphic rocks with good technological properties and valuable ornamental characteristics, which have been exploited since ancient times. Actually, their use is limited and monitored in several countries worldwide because they can contain fibrous asbestos minerals that may be carcinogenic. Furthermore, certain types of fibrous minerals can be confused with asbestos, and must therefore be carefully investigated. We have investigated the possible presence of the asbestos and non-asbestos fibrous phases contained in serpentinitic rocks in a meta-ophiolitic sequence from the Gimigliano-Mount Reventino Unit (Southern Italy), which had not been previously assessed. The detection and quantification of asbestos and the correct distinction of the fibrous non-asbestos minerals are very important not only from a scientific point of view, but also from a legislative one. This is especially the case for the administrative agencies that have to take decisions with regards to the implementation of public and occupational health protection measures (e.g., in road yards and quarry excavations). As a consequence of this, serpentinitic rock samples have been characterized in detail through X-ray powder diffraction, scanning and transmission electron microscopy combined with energy-dispersive spectrometry, analytical electron microscopy (SEM–EDS and TEM–AEM), differential scanning calorimetry, thermogravimetry and micro-Raman spectroscopy. Two kinds of asbestos and four kinds of non-asbestos fibrous silicates have been detected in the examined samples. In order of decreasing abundance these are polygonal serpentine, chrysotile, fibrous antigorite, tremolite, gedrite and magnesiohornblende. The size, morphology, crystallinity and chemical composition of the fibres were also discussed, in the light of the possible role these properties could play in the carcinogenic effect on human health.     

Alteration kinetics of natural stones due to sodium sulfate crystallization: can reality match experimental simulations?

Salt decay is a very destructive mechanism that affects frequently the porous building materials of our architectural heritage. Sodium sulfate is one of the salts found in this context. It usually demonstrates high destructive power in salt crystallization tests because it can crystallize not only during evaporative processes but also when the temperature drops or when the salt solution comes into contact with pre-existing crystals. However, the use of extreme temperatures or successive wet/dry cycles also makes these tests unrepresentative of reality. To verify whether sodium sulfate can also be so destructive in field conditions, we have performed crystallization tests consisting of a single isothermal drying event. Three natural stones, relevant for the architectural heritage, were used for the purpose: Bentheimer sandstone, Ançã limestone, and a current Portuguese limestone of low porosity. The stones gave rise to distinct salt decay patterns: efflorescence, multilayer delamination and unilayer delamination, respectively. These morphological alterations were characterized at the micrometer scale by a new method based on what we have called the alteration kinetics curve. Such curve is calculated from topographic profiles obtained by a non-contact optical technique. The multilayer and unilayer delamination decay were also monitored by time-lapse photography. The work led us to conclude that sodium sulfate can indeed be also very destructive in field-representative conditions. Moreover, it showed that the optical method can be a valuable aid in the development of more realistic salt crystallization tests.     

Hydrogeochemical analysis on Italian bottled mineral waters: Effects of geology

The use of bottled mineral waters use is increasingly becoming popular and the need for better knowledge of their chemical composition is a key issue for defining their quality, particularly for those elements that are not monitored on a regular basis. The link between geology and water chemistry is well known and can lead to extreme differences in element distribution and is an issue that needs to be addressed. Such an opportunity has been provided by a project of the EuroGeoSurvey Geochemistry Expert Group aimed at the characterization of groundwater geochemistry using bottled mineral waters purchased in supermarkets all over Europe. On these waters pH, conductivity and concentrations of 69 elements and ions were measured at the BGR geochemical laboratories. On a total of 1785 “samples”, 158 represent waters bottled in Italy in 126 different sites scattered throughout the country. Most of the purchased mineral water is packaged in PET bottles. In this paper, the dataset concerning Italy has been used to provide an overview on the relationship between natural concentration of the determined chemical elements in groundwater and geo-lithological features. These relationships have been investigated mostly taking into account the surface geology and other information available on water sources. Application of R-Mode factor analysis to the data set allowed the determination of the possible relationship between the distribution of individual elements and lithology or other surface enrichment phenomena. In particular waters draining through volcanic rocks are enriched in elements such as As, B, Br⁻, Cl⁻, Cs, I, K, Li, Na, NO₃⁻, PO₄³⁻, Rb, Sc, SiO₂, Sr, Te, Ti, and V up to 3 orders of magnitude higher than waters draining through other lithologies. REE and Y show significant difference in median concentration due to interaction of waters with plutonic rocks. Many elements have a large spread of concentrations, which reflects natural variations and interaction with particular lithologies. One of the five R-mode factor analysis associations, recognized as being representative of elements analysed shows high nitrate and V loadings along with As, PO₄³⁻ and Se. The latter association probably reflects a sign of anthropogenic contribution in some aquifers in volcano-sedimentary or silico-clastic deposits and in intensively cultivated areas.     

Evaluation of the mineral exploration influence on sediment composition in the Gualaxo do Norte River Basin (MG-Brazil) based on geochemical and stratigraphic data

The aim of this study was to investigate the influence of mining on the geochemical composition of the alluvial sediments of the Gualaxo do Norte River Basin, located in the eastern-southeastern portion of the Quadrilátero Ferrífero (Minas Gerais State, Brazil). The analysis of the sedimentological succession was carried out using 16 stratigraphic sections (cutbanks and alluvial terraces) and analysis of 111 sediment samples for major- and trace-elements by ICP-OES. The stratigraphic analysis revealed the deposition history of the collected sediments. Anomalous concentrations of certain elements such as As and Pb were found, which are associated with stratigraphic facies with evidences of gold artisanal mining, and Fe anomalies associated with iron ore mining. The classification of the sections was possible by means of principal component analysis. From the sediment characteristics, three groups were identified: (1) those influenced by iron ore mining and gold artisanal mining; (2) those influenced by iron ore mining and (3) those with no influence of human activities.     

Is there a common pattern of future gas-phase air pollution in Europe under diverse climate change scenarios?

Climate change alone influences future levels of tropospheric ozone and their precursors through modifications of gas-phase chemistry, transport, removal, and natural emissions. The goal of this study is to determine at what extent the modes of variability of gas-phase pollutants respond to different climate change scenarios over Europe. The methodology includes the use of the regional modeling system MM5 (regional climate model version)-CHIMERE for a target domain covering Europe. Two full-transient simulations covering from 1991–2050 under the SRES A2 and B2 scenarios driven by ECHO-G global circulation model have been compared. The results indicate that the spatial patterns of variability for tropospheric ozone are similar for both scenarios, but the magnitude of the change signal significantly differs for A2 and B2. The 1991–2050 simulations share common characteristics for their chemical behavior. As observed from the NO₂ and α-pinene modes of variability, our simulations suggest that the enhanced ozone chemical activity is driven by a number of parameters, such as the warming-induced increase in biogenic emissions and, to a lesser extent, by the variation in nitrogen dioxide levels. For gas-phase pollutants, the general increasing trend for ozone found under A2 and B2 forcing is due to a multiplicity of climate factors, such as increased temperature, decreased wet removal associated with an overall decrease of precipitation in southern Europe, increased photolysis of primary and secondary pollutants as a consequence of lower cloudiness and increased biogenic emissions fueled by higher temperatures.     

Analyzing the spatial interactions between rainfall levels and flooding prediction in São Paulo

Rainfall is one of the primary triggers for many geological and hydrological natural disasters. While the geological events are related to mass movements in land collapse due to waterlogging, the hydrological ones are usually assigned to runoff or flooding. Studies in the literature propose predicting mass movement events as a function of accumulated rainfall levels recorded at distinct periods. According to these approaches, a two-dimensional rainfall levels feature space is segmented into the occurrence and non-occurrence decision regions by an empirical critical curve (CC). Although this scheme may easily be extended to other purposes and applications, studies in the literature need to discuss its use for flooding prediction. In light of this motivation, the present study is unfolded in (1) verifying that defining CCs in the rainfall levels feature space is a practical approach for flooding prediction and (2) analyzing how geospatial components interact with rainfall levels and flooding prediction. A database containing the rainfall levels recorded for flooding and non-flooding events in São Paulo city, Brazil, regarding the period 2015–2016, was considered in this study. The results indicate good accuracy for flooding prediction using only partial rain, which can be improved by adding physical characteristics of the flooding locations, demonstrating a direct correlation with spatial interactions, and rainfall levels.     

New Reference Materials,Analytical Procedures and Data Reduction Strategies for Sr Isotope Measurements in Geological Materials by LA-MC-ICP-MS

Laser ablation multi-collector mass spectrometry (LA-MC-ICP-MS) has emerged as the technique of choice for in situ measurements of Sr isotopes in geological minerals. However, the method poses analytical challenges and there is no widely adopted standardised approach to collecting these data or correcting the numerous potential isobaric inferences. Here, we outline practical analytical procedures and data reduction strategies to help establish a consistent framework for collecting and correcting Sr isotope measurements in geological materials by LA-MC-ICP-MS. We characterise a new set of plagioclase reference materials, which are available for distribution to the community, and present a new data reduction scheme for the Iolite software package to correct isobaric interferences for different materials and analytical conditions. Our tests show that a combination of Kr-baseline subtraction, Rb-peak-stripping using βRb derived from a bracketing glass reference material, and a CaCa or CaAr correction for plagioclase and CaCa or CaAr + REE²⁺ correction for rock glasses, yields the most accurate and precise ⁸⁷Sr/⁸⁶Sr measurements for these materials. Using the analytical and correction procedures outlined herein, spot analyses using a beam diameter of 100 μm or rastering with a 50–65 μm diameter beam can readily achieve < 100 ppm 2SE repeatability ("internal") precision for ⁸⁷Sr/⁸⁶Sr measurements for materials with < 1000 μg g^-1 Sr.     

The Continuum Voronoi Block Model for simulation of fracture process in hard rocks

In this paper, a numerical model is presented to represent the fracture process in hard rocks based on a pseudo-discontinuum method called the Continuum Voronoi Block Model (CVBM). To validate this tool, numerical models for one Brazilian test, one unconfined compression test, and multiple triaxial compression tests with different confining stress were calibrated to match laboratory test results for Creighton granite. The model proved robust and matched the following macro-properties: crack initiation (CI) stress, (CD) stress, peak strength, tensile strength, Young's Modulus, and Poisson's ratio. The calibrated model served as a basis for a sensitivity study to analyze how micro-properties influence the rock's macroscopic responses. From the sensitivity study, a calibration methodology was proposed, which shall facilitate the use of the CVBM in future works.