Sediment deposition from turbidity currents in simulated aquatic vegetation canopies

A laboratory flume experiment was carried out in which the hydrodynamic and sedimentary behaviour of a turbidity current was measured as it passed through an array of vertical rigid cylinders. The cylinders were intended primarily to simulate aquatic vegetation canopies, but could equally be taken to represent other arrays of obstacles, for example forests or offshore wind turbines. The turbidity currents were generated by mixing naturally sourced, poly‐disperse sediment into a reservoir of water at concentrations from 1·0 to 10·0 g l^?1, which was then released into the experimental section of the flume by removing a lock gate. For each initial sediment concentration, runs with obstacle arrays with solid plant fractions of 1·0% and 2·5%, and control cases with no obstacles, were carried out. The progress of the current along the flume was characterized by the array drag term, C_Dax_c (where C_D is the array drag coefficient, at the frontal area of cylinders per unit volume, and x_c is the position of the leading edge of the current along the flume). The downward depositional flux of sediment out of the current as it proceeded was measured at 13 traps along the flume. Analysis of these deposits divided them into fine (2·2 to 6·2 μm) and coarse (6·2 to 104 μm) fractions. At the beginning of their development, the gravity currents proceeded in an inertia‐dominated regime until C_Dax_c = 5. For C_Dax_c > 5, the current transitioned into a drag‐dominated regime. For both fine and coarse sediment fractions, the rate of sediment deposition tended to decrease gradually with distance from the source in the inertial regime, remained approximately constant at the early drag‐dominated regime, and then rose and peaked at the end of the drag‐dominated stage. This implies that, when passing through arrays of obstacles, the turbidity currents were able to retain sufficient sediment in suspension to maintain their flow until they became significantly influenced by the drag exerted by the obstacles.     

Definition and performance of a threshold-based regional early warning model for rainfall-induced landslides

A process chain for the definition and the performance assessment of an operational regional warning model for rainfall-induced landslides, based on rainfall thresholds, is proposed and tested in a landslide-prone area in the Campania region, southern Italy. A database of 96 shallow landslides triggered by rainfall in the period 2003–2010 and rainfall data gathered from 58 rain gauges are used. First, a set of rainfall threshold equations are defined applying a well-known frequentist method to all the reconstructed rainfall conditions responsible for the documented landslides in the area of analysis. Several thresholds at different exceedance probabilities (percentiles) are evaluated, and nine different percentile combinations are selected for the activation of three warning levels. Subsequently, for each combination, the issuing of warning levels is computed by comparing, over time, the measured rainfall with the pre-defined warning level thresholds. Finally, the optimal percentile combination to be employed in the regional early warning system, i.e. the one providing the best model performance in terms of success and error indicators, is selected employing the “event, duration matrix, performance” (EDuMaP) method.     

Anatomical variation of five plant species along an elevation gradient in Mexico City basin within the Trans-Mexican Volcanic Belt,Mexico

Change in environmental conditions with altitudinal gradients induces morpho-anatomical variations in plants that have been poorly documented in intertropical regions. Five species with three life forms, cryptophyte (Alchemilla procumbens, Geranium seemannii), hemicryptophyte (Acaena elongata, Lupinus montanus), and phanerophyte (Symphoricarpos microphyllus), distributed along an altitudinal gradient in the Sierra Nevada of central Mexico, were studied. The aims were to identify and evaluate their morpho-anatomical modifications under the hypothesis that the sizes of individuals and of their wood and leaf cell types decrease as elevation increases. Three individuals per species per site were collected at seven locations along the altitudinal gradient (2949-3952 m). Their morpho-anatomical characters were analyzed through multiple regression analyses. Elevation was the variable that best explained anatomical changes in the leaf and wood of the five species. Canopy density and potassium content in the soil also contributed to explain the variation in anatomical variables along the gradient. As elevation increased a bimodal pattern was observed in various anatomical characters as in the leaf width of A. elongata, A. procumbens and G. seemannii and in the vessel diameter of A. procumbens, G. seemannii, and L. montanus. Other features as the vessel diameter of A. elongata, the fiber length of S. microphyllus, and the ray width of A. elongata increased as the elevation increased. Anatomical traits have a tendency to decrease in size but just toward the end of the gradient, which is probably related to changes in canopy density. The plant response to the altitudinal gradient is more focused on anatomical adaptations than morphological variation; it is also species dependent.     

Lateral flow of African mantle below the nearby Tyrrhenian plate: geochemical evidence

The Quaternary magmatism of the Southern Tyrrhenian basin represents a rare example of an active volcanic arc system where ocean island basalt (OIB) and island arc basalt (IAB) magmas coexist. Although there is general agreement on the importance of the Ionian oceanic lithosphere subduction in the genesis of the IAB magmatism, the tectono‐magmatic processes producing the coexisting OIB magmas are still poorly understood. Here we show that the geochemistry of the Quaternary Southern Tyrrhenian OIB‐type magmatism (i.e. Ustica island and Prometeo, a previously unknown submarine lava field) is very similar to that of OIB‐type volcanoes situated on the nearby African plate (i.e. Etna and Hyblean Plateau). Among the possible geodynamic scenarios proposed to explain the coexistence of OIB and IAB magmas in arc settings, we consider the development of a tear at the edge of the Ionian plate as the more likely mechanism to favour the flow of African asthenospheric mantle below the Tyrrhenian plate.     

Eutrophication and some European waters of restricted exchange

Regions of Restricted Exchange (RREs) are an important feature of the European coastline. They are historically preferred sites for human settlement and aquaculture and their ecosystems, and consequent human use, may be at risk from eutrophication. The OAERRE project (EVK3-CT1999-0002) concerns ‘Oceanographic Applications to Eutrophication in Regions of Restricted Exchange’. It began in July 2000, and studies six sites. Four of these sites are fjords: Kongsfjorden (west coast of Spitzbergen); Gullmaren (Skagerrak coast of Sweden); Himmerfjärden (Baltic coast of Sweden); and the Firth of Clyde (west coast of Scotland). Two are bays sheltered by sand bars: Golfe de Fos (French Mediterranean); and Ria Formosa (Portuguese Algarve). Together they exemplify a range of hydrographic and enrichment conditions. The project aims to understand the physical, biogeochemical and biological processes, and their interactions, that determine the trophic status of these coastal marine RRE through the development of simple screening models to define, predict and assess eutrophication. This paper introduces the sites and describes the component parts of a basic screening model and its application to each site using historical data. The model forms the starting point for the OAERRE project and views an RRE as a well-mixed box, exchanging with the sea at a daily rate E determined by physical processes, and converting nutrient to phytoplankton chlorophyll at a fixed yield q. It thus uses nutrient levels to estimate maximum biomass; these preliminary results are discussed in relation to objective criteria used to assess trophic status. The influence of factors such as grazing and vertical mixing on key parameters in the screening model are further studied using simulations of a complex ‘research’ model for the Firth of Clyde. The future development of screening models in general and within OAERRE in particular is discussed. In addition, the paper looks ahead with a broad discussion of progress in the scientific understanding of eutrophication and the legal and socio-economic issues that need to be taken into account in managing the trophic status of RREs.     

Tectonomagmatism in continental arcs: evidence from the Sark arc complex

The island of Sark (Channel Islands, UK) exposes syntectonic plutons and country rock gneisses within a Precambrian (Cadomian) continental arc. This Sark arc complex records sequential pulses of magmatism over a period of 7 Ma (ca. 616–609 Ma). The earliest intrusion (ca. 616 Ma) was a composite sill that shows an ultramafic base overlain by a magma-mingled net vein complex subsequently deformed at near-solidus temperatures into the amphibolitic and tonalitic Tintageu banded gneisses. The deformation was synchronous with D₂ deformation of the paragneissic envelope, with both intrusion and country rock showing flat, top-to-the-south LS fabrics. Later plutonism injected three homogeneous quartz diorite–granodiorite sheets: the Creux–Moulin pluton (150–250 m; ca. 614 Ma), the Little Sark pluton (>700 m; 611 Ma), and the Northern pluton (>500 m; 609 Ma). Similar but thinner sheets in the south (Derrible–Hogsback–Dixcart) and west (Port es Saies–Brecqhou) are interpreted as offshoots from the Creux–Moulin pluton and Little Sark pluton, respectively. All these plutons show the same LS fabric seen in the older gneisses, with rare magmatic fabrics and common solid state fabrics recording syntectonic crystallisation and cooling. The cooling rate increased rapidly with decreasing crystallisation age: >9 Ma for the oldest intrusion to cool to lower amphibolite conditions, 7–8 Ma for the Creux Moulin pluton, 5–6 Ma for the Little Sark pluton, and <3 Ma for the Northern pluton. This cooling pattern is interpreted as recording extensional exhumation during D₂. The initiation of the D₂ event is suggested to have been a response to the intrusion of the Tintageu magma which promoted a rapid increase in strain rate (>10⁻¹⁴ s⁻¹) that focussed extensional deformation into the Sark area. The increased rates of extension allowed ingress of the subsequent quartz diorite–granodiorite sheets, although strain rate slowly declined as the whole complex cooled during exhumation. The regional architecture of syntectonic Cadomian arc complexes includes flat-lying “Sark-type” and steep “Guernsey-type” domains produced synchronously in shear zone networks induced by oblique subduction: a pattern seen in other continental arcs such as that running from Alaska to California.     

Petrogenesis of the Kirkpatrick Basalt,Solo Nunatak,northern Victoria Land,Antarctica, based on isotopic compositions of strontium,oxygen and sulfur

Chemical and isotopic compositions of Jurassic tholeiites of the Kirkpatrick Basalt Group from Solo Nunatak, northern Victoria Land, indicate that these rocks are contaminated with crustal material. The basalts are fine grained and contain phenocrysts of augite, pigeonite, hypersthene and plagioclase. The flows on Solo Nunatak are chemically more similar to average tholeiite than flows from Mt. Falla and Storm Peak in the Central Transantarctic Mountains (TAM) which appear to be more highly differentiated. Initial ⁸⁷Sr/⁸⁶Sr ratios of the flows on Solo Nunatak are high (>0.710) and are similar to those reported for the Kirkpatrick Basalt in the Central TAM. Whole-rock δ¹⁸O values are also high, ranging from +6.0 to +9.3‰ and correlate positively with initial ⁸⁷Sr/⁸⁶Sr ratios, similar to the Kirkpatrick Basalt in the Central TAM. The correlation between initial ⁸⁷Sr/⁸⁶Sr ratios and δ¹⁸O values is explained as the result of simultaneous fractional crystallization and assimilation of a crustal contaminant. Sulfur isotope compositions vary between limits of δ³⁴S= -4.01 to +3.41‰ Variations in (δ³⁴S probably resulted from outgassing of SO₂ under varying oxygen fugacities. Laboratory for Isotope Geology and Geochemistry (Isotopia), Contribution No. 71     

High-temperature single-crystal neutron diffraction study of natural chondrodite

The H-atom environment in a Tilly Foster chondrodite was analyzed using single-crystal neutron-diffraction data collected at 500, 700 and 900 K and previously published low temperature data collected at 10, 100 and 300 K on the same crystal (Mg_4.64Fe_0.28Mn_0.014Ti_0.023(Si_1.01O₄)₂F_1.16(OH)_0.84; Friedrich et al. in Am Mineral 86:981–989, 2001). The full mean square displacement matrix Σ of the O–H pair was determined from the temperature dependence of the anisotropic displacement parameters, enabling a proper correction of the O–H bond for thermal vibration without assumptions about the correlation of O and H movements. The results show that the perpendicular O–H motions in chondrodite are intermediate between the riding and the independent motion models. The corrected O–H bond lengths do not change with temperature whereas the corrected H···F distances show an increase of ~0.02 Å with temperature, as do the Mg–O distances. This result shows that spectroscopic observations on the strength of the covalent O–H bond cannot be interpreted unambiguously in terms of a corresponding behaviour of the associated H···O/F hydrogen bond.