Martian thermal history,core segregation,and tectonics

A series of calculated thermal histories of Mars is presented, and their possible relation to surface tectonic history is discussed. The models include convective heat transport through an empirical approximation, and heating by radioactivity and core segregation. Initial temperature, T_i, and the timing and duration of core segregation are treated as free parameters. T_i is the main determinant of Martian thermal evolution: as it is varied from 20 to 100% of the present mean temperature, the maximum in surface heat flux moves from very recent to very early in Martian history. For the latter cases, the details of core segregation control the detailed timing of a peak in the thermal flux that exceeded 100 mW/m². It is suggested that the early disruption of cratered terrain crust in the northern hemisphere and subsequent volcanic resurfacing may have been related to core segregation. This would be consistent with a scenario in which an early period of core segregation generated a marked peak in the thermal flux that may have lead to extensivev partial melting and volcanism. This scenario would require Mars to have had an initial mean temperature comparable to the present value.     

An analysis of failure mechanism constraints on pre-failure rock block deformation using TLS and roto-translation methods

Rockfall hazards increase the risk of train derailment along railway corridors in western Canada. In this study, repeated terrestrial laser scanning (TLS) datasets were collected every 2–3 months at three different sites along the Thompson and Fraser River corridors in British Columbia, referred to as the Goldpan, White Canyon, and Mile 109 sites. A total of 207 rockfall events occurring across all three sites between November 11, 2014 and October 18, 2016 were recorded in a database. For each of these rockfalls, pre-failure deformation was measured using a method of three-dimensional roto-translation block tracking. Each rockfall was classified by its deformation behaviour and further categorised based on failure mechanism, volume, lithology, and the roughness condition of the failure plane. Results reveal that detectable levels of deformation were measured in 33% of the total number of rockfall events using the present methods. Rotation deformation was most commonly observed in toppling failures with relatively steep joint orientations. Conversely, planar sliding blocks generally exhibited the least measurable deformation, with the majority not showing any precursory translation or rotation. It is postulated that overhanging rockfall configurations may suppress the expression of deformation in rockfall source blocks, though additional research is required to confirm this.     

A Geoarchaeological Study of the Middle and Upper Pleistocene Levels at Canteen Kopje,Northern Cape Province,South Africa

Canteen Kopje, situated in the Northern Cape Province of South Africa, has two main archaeological deposits: alluvial gravels and a mantle of overlying fine sediments known locally as the “Hutton Sands.” This paper focuses on the fine sediments, the three industries contained within them, and the interface with the underlying gravels in an attempt to clarify their formation and transformation. A Fauresmith assemblage is found at this interface; it is thus crucial to understand the processes of deposition and modification at this poorly understood boundary. The methods used in this study involved the analysis of artifact depositional (dip and orientation) and spatial data, artifact condition, raw materials, and assemblage size profiles. Data presented document the mixing between the lowest levels of the fine sediments and the underlying alluvial gravels. This study thus provides important contextual information for the Fauresmith industry at Canteen Kopje.     

Outgoing long wave radiation variability from IR satellite data prior to major earthquakes

Our analysis of the continuous outgoing long wave earth radiation (OLR) indicates anomalous variations prior to a number of medium to large earthquakes. The most recent analysis of OLR is from the M9.0 Sumatra Andaman Islands mega trust event. We compared the reference fields for December 2001 to 2004 and found OLR anomalous values, > 80 W/m², (2σ) within the epicentral area on Dec 21, 2004, 5 days before the event. We used the NOAA/IR daily (one degree) and monthly (two and half degree) gridded data to differentiate between the global and seasonal variability and the transient local anomalies. The cause of such anomalies is not fully understood; one possible explanation is the existence of thermal outgoing radiation as a result of near ground air ionization and latent heat change due to change of air humidity and temperature. This phenomenon is hypothesized to be part of a relationship between tectonic stresses, electrochemical and thermodynamic processes in the atmosphere and increasing mid IR flux, all part of a family of electromagnetic (EM) phenomena related to earthquake activity. The time scale of the observed variations is a few weeks before the onset of the seismic event. In comparison with several years of data, the observed time-series preceding the earthquake had unusually high OLR. The OLR anomaly corresponds to a large area of ground coverage and coincides with the main epicentral zone. The significance of these observations is explored using data from most recent East Asian earthquake swarm of December 2004 and three other earthquakes.     

Assessing regional‐scale spatio‐temporal patterns of groundwater–surface water interactions using a coupled SWAT‐MODFLOW model

Interaction between groundwater and surface water in watersheds has significant impacts on water management and water rights, nutrient loading from aquifers to streams, and in‐stream flow requirements for aquatic species. Of particular importance are the spatial patterns of these interactions. This study explores the spatio‐temporal patterns of groundwater discharge to a river system in a semi‐arid region, with methods applied to the Sprague River Watershed (4100 km²) within the Upper Klamath Basin in Oregon, USA. Patterns of groundwater–surface water interaction are explored throughout the watershed during the 1970–2003 time period using a coupled SWAT‐MODFLOW model tested against streamflow, groundwater level and field‐estimated reach‐specific groundwater discharge rates. Daily time steps and coupling are used, with groundwater discharge rates calculated for each model computational point along the stream. Model results also are averaged by month and by year to determine seasonal and decadal trends in groundwater discharge rates. Results show high spatial variability in groundwater discharge, with several locations showing no groundwater/surface water interaction. Average annual groundwater discharge is 20.5 m³/s, with maximum and minimum rates occurring in September–October and March–April, respectively. Annual average rates increase by approximately 0.02 m³/s per year over the 34‐year period, negligible compared with the average annual rate, although 70% of the stream network experiences an increase in groundwater discharge rate between 1970 and 2003. Results can assist with water management, identifying potential locations of heavy nutrient mass loading from the aquifer to streams and ecological assessment and planning focused on locations of high groundwater discharge. Copyright © 2016 John Wiley & Sons, Ltd.     

A critical review of three methods used for the measurement of mercury (Hg)-dissolved organic matter stability constants

Three experimental techniques – ion exchange, liquid–liquid extraction with competitive ligand exchange, and solid-phase extraction with competitive ligand exchange (CLE–SPE) – were evaluated as methods for determining conditional stability constants (K) for the binding of mercury (Hg²⁺) to dissolved organic matter (DOM). To determine the utility of a given method to measure stability constants at environmentally relevant experimental conditions, experimental results should meet three criteria: (1) the data must be experimentally valid, in that they were acquired under conditions that meet all the requirements of the experimental method, (2) the Hg:DOM ratio should be determined and it should fall within levels that are consistent with environmental conditions, and (3) the stability constants must fall within the detection window of the method. The ion exchange method was found to be limited by its detection window, which constrains the method to stability constants with log K values less than about 14. The liquid–liquid extraction method was found to be complicated by the ability of Hg–DOM complexes to partition into the organic phase. The CLE–SPE method was found to be the most suitable of these methods for the measurement of Hg–DOM stability constants. Stability constants for DOM isolates measured using the CLE–SPE method at environmentally relevant Hg:DOM ratios were log K = 25–30 (M⁻¹). These values are consistent with the strong Hg²⁺ binding expected for reduced S-containing binding sites.     

Liquefaction of soil in the Tokyo Bay area from the 2011 Tohoku (Japan) earthquake

Immediately following the 11th March 2011 M_w 9.0 Tohoku (Japan) earthquake, a field investigation was carried out around the Tokyo Bay area. This paper provides first-hand observations (before or just at the onset of repair) of widespread liquefaction and the associated effects. Observations related to uplift of manholes, settlement of ground, performance of buildings and bridges and the effects of ground improvements are also presented. Recorded ground motions near the Tokyo Bay area were analysed to understand their key characteristics (large amplitude and long duration). Lessons learnt are also presented.     

Flexural deformation controls on Late Quaternary sediment dispersal in the Garo-Rajmahal Gap,NW Bengal Basin

Subsurface deformation is a driver for river path selection when deformation rates become comparable to the autogenic mobility rate of rivers. Here we combine geomorphology, soil and sediment facies analyses, and geophysical data of the Late Quaternary sediments of the central Garo-Rajmahal Gap in Northwest Bengal to link subsurface deformation with surface processes. We show variable sedimentation characteristics, from slow rates (<0.8 mm/year) in the Tista megafan at the foot of the Himalaya to nondeposition at the exposed surface of the Barind Tract to the south, enabling the development of mature soils. Combined subsidence in the Tista fan and uplift of the Barind Tract are consistent with a N-S flexural response of the Indian plate to loading of the Himalaya Mountains given a low value of elastic thickness (15–25 km). Provenance analysis based on bulk strontium concentration suggests a dispersal of sediment consistent with this flexural deformation—in particular the abandonment of the Barind Tract by a Pleistocene Brahmaputra River and the current extents of the Tista megafan lobes. Overall, these results highlight the control by deeply rooted deformation patterns on the routing of sediment by large rivers in foreland settings.     

Geological controls on refractory ore in an orogenic gold deposit, Macraes mine, New Zealand

The Macraes mine is hosted in an orogenic (mesothermal) gold deposit in metasedimentary rocks of the Otago Schist belt. Much gold occurs within altered schist with minimal silica-addition, and this study focuses on altered schist ore types. The unmineralized host schists are chemically and mineralogically uniform in composition, but include two end-member rock types: feldspathic schist and micaceous schist. Both rock types have undergone hydrothermal alteration along a shallow-dipping foliation-parallel shear zone, but their different rheological properties have affected the style of mineralisation. Micaceous schist has been extensively recrystallized and hydrothermally altered during ductile deformation, to form ores characterized by abundant, disseminated millimetre-scale pyrite cubes (typically 1–2 wt% S) and minor silicification. The earliest pyrite contained Ni and/or As in solid solution and no gold was imaged in these pyrites or later arsenopyrite grains. The ore type is refractory and gold recovery by cyanide leaching is less than 50%, with lowest recovery in rocks that have been less affected by later brittle deformation. In contrast, hydrothermally altered feldspathic schist is characterized by mineralised black microshears and veinlets formed during shear-zone related brittle deformation. Microsheared ore has relatively low sulphur content (<0.7 wt%) and muscovite has been illitised during hydrothermal alteration. Pyrite and arsenopyrite in microshears are fractured and deformed, and contain 1–10 m blebs of gold. Later pyrite veinlets also contain micron- to submicron-scale inclusions of sphalerite, chalcopyrite, galena, and gold (10 microns). Gold in microsheared ore is more readily recoverable than in the refractory ore, although encapsulation of the fine gold grains inhibits cyanidation. Both microsheared ore and disseminated pyritic ore pass laterally into mineralised black shears, which contain hydrothermal graphite and late-stage cataclastic sulphides. This black, sheared ore releases gold readily, but the gold is then adsorbed on to gangue minerals (preg-robbed) and net cyanidation recovery can be less than 50%. Hence, low gold recovery during cyanidation results from (1) poor liberation of gold encapsulated in microcrystalline quartz and unfractured sulphide grains, and (2) preg-robbing of liberated gold during cyanidation. Introduction of pressure-oxidation of ore prior to cynidation has mitigated these issues.