Late Triassic ammonoid Sirenites from the Sabudani Formation in Tokushima,Southwest Japan,and its biostratigraphic and paleobiogeographic implications

Discovery of Sirenites senticosus (Dittmar) in the upper part of the Sabudani Formation of the Kurosegawa Belt, Kito area, Tokushima Prefecture, Japan, establishes a late Early Carnian age for this part of the stratigraphic unit. Because S. senticosus was mainly distributed in the Tethyan region, its occurrence provides evidence that Late Triassic ammonoids of Japan had strong affinities with those of the Tethyan faunas. This finding clearly differs from the biogeographic distribution of contemporary bivalves in the region, which are referred to as the Kochigatani bivalve faunas, and show strong affinities to faunas of the Boreal region.     

Levels and distribution of polybrominated diphenyl ethers and organochlorine compounds in sea turtles from Japan

Three species of sea turtles (green, hawksbill and loggerhead turtles) stranded along the coasts or caught (by-catch) around Ishigaki Island and Kochi, Japan were collected between 1998 and 2006 and analyzed for six organohalogen compounds viz., PBDEs, PCBs, DDTs, CHLs, HCHs and HCB. The present study is the first and foremost to report the occurrence of organohalogen compounds in the sea turtles from Japan. Among the compounds analyzed, concentrations of PCBs, DDTs and CHLs were the highest in all the turtle samples. PBDEs were ubiquitously present in all the turtle species. Comparing with the other two species, concentrations of organohalogens in green turtle were relatively low and decreasing trend in the concentrations were noted with increasing carapace length. Concentrations of OCs in sea turtles from the coasts of Ishigaki Island and Kochi were relatively low as compared to those from other locations in the world.     

Long-term simulations of the sulfur concentrations over the China, Japan and Korea: A model comparison study

Three comprehensive acid deposition models were used to simulate the sulfur concentrations over northeast Asia over the period covering entire year of 2002, and discussed the aggregated uncertainties and discrepancies of the three models. The participating models are from the countries participating in the project of Longrange Transboundary Air Pollutants in Northeast Asia (LTP): China, Japan and Korea. The Eulerian Model-3/CMAQ (by China), Regional Air Quality Model (RAQM, by Japan), and Comprehensive Acid Deposition Model (CADM, by Korea) were employed by each country with common emissions data established by the administrative agencies of China, Japan and Korea. The episodic simulation results between 1 to 15, March 2002 are also presented, during which aircraft measurements were carried out over the Yellow sea. The episodic results show both a wide short-term variability in simulations against measurements, and maximum concentration differences of 3～5 times among the three models, requiring that further attention before confidence among the three models can be claimed for short-term simulations. However, the year-long cumulative simulations showed almost the same general features, with lower aggregated uncertainties between the three models, produced by the long term integration over northeast Asia.     

Pressure and temperature dependence of the viscosity of a NaAlSi<Subscript>2</Subscript>O<Subscript>6</Subscript> melt

The viscosity of a silicate melt of composition NaAlSi₂O₆ was measured at pressures from 1.6 to 5.5 GPa and at temperatures from 1,350 to 1,880°C. We employed in situ falling sphere viscometry using X-ray radiography. We found that the viscosity of the NaAlSi₂O₆ melt decreased with increasing pressure up to 2 GPa. The pressure dependence of viscosity is diminished above 2 GPa. By using the relationship between the logarithm of viscosity and the reciprocal temperature, the activation energies for viscous flow were calculated to be 3.7 ± 0.4 × 10² and 3.7 ± 0.5 × 10² kJ/mol at 2.2 and 2.9 GPa, respectively.     

A FEM-MPM hybrid coupled framework based on local shear strength method for simulating rainfall/runoff-induced landslide runout

Landslides - Limited by the independence and its defects of each general software package, simultaneous analysis of runoff, seepage, and large-deformation analysis is still an inevitable challenge....     

Shaking table tests on seismic response of steel braced frames with column uplift

Previous studies have suggested that rocking vibration accompanied by uplift motion might reduce the seismic damage to buildings subjected to severe earthquake motions. This paper reports on the use of shaking table tests and numerical analyses to evaluate and compare the seismic response of base‐plate‐yielding rocking systems with columns allowed to uplift with that of fixed‐base systems. The study is performed using half‐scale three‐storey, 1 × 2 bay braced steel frames with a total height of 5.3 m. Base plates that yield due to column tension were installed at the base of each column. Two types of base plates with different thicknesses are investigated. The earthquake ground motion used for the tests and analyses is the record of the 1940 El Centro NS component with the time scale shortened by a factor of 1/√2. The maximum input acceleration is scaled to examine the structural response at various earthquake intensities. The column base shears in the rocking frames with column uplift are reduced by up to 52% as compared to the fixed‐base frames. Conversely, the maximum roof displacements of the fixed and rocking frames are about the same. It is also noted that the effect of the vertical impact on the column associated with touchdown of the base plate is small because the difference in tensile and compressive forces is primarily due to the self‐limiting tensile force in the column caused by yielding of the base plate. Copyright © 2006 John Wiley & Sons, Ltd.     

Effects of coastal erosion on landslide activity revealed by multi-sensor observations

Coastal erosion is becoming an increasingly serious consequence of climate change. This study demonstrates the effects of coastal erosion on landslide activity while considering the amount of erosion and changes in pore water pressure. To determine the factors related to landslide slip generation, we specifically measured the displacement, deformation, pore water pressure, and amount of erosion with high temporal resolution (1 s–1 h) for a coastal landslide in Hokkaido, north-eastern Japan, for 7 months. It has been determined that landslides occur simultaneously with high pore water pressure. Toe erosion events also occurred several times, while the landslide exhibited major displacement. Because toe erosion and the increase in pore water pressure occurred simultaneously, we tried to determine which of the two contributed majorly to the landslide displacement by conducting a stability analysis that incorporates the effects of the two factors. From the actual observed data, toe erosion and the increase in pore water pressure had comparable effects on the destabilization of the studied landslide. Specifically, the time series for the safety factor shows that the landslide in the case with toe erosion was destabilized more than that in the case with no erosion, with a difference of more than 5% in the safety factor. The model with toe erosion provided a better explanation for the landslide displacement. Furthermore, the inclination data suggested that erosion took place at least 1 month before the landslide displacement. This implied that coastal erosion played a role in the preparation and ongoing displacement of the coastal landslide. Inland landslides with toes that are subject to undercutting due to river incision or artificial construction have geomorphological settings that are similar to those of the studied landslide. The knowledge obtained here can contribute to the understanding of destabilization mechanisms and terrain changes related to such landslides. © 2020 John Wiley & Sons, Ltd.     

Effects of alkali and alkaline-earth cations on the high-pressure sound velocities of aluminosilicate glasses

Physics and Chemistry of Minerals - A black tourmaline sample from Seagull batholith (Yukon Territory, Canada) was established to be a schorl with concentrations of Fe2+ among the highest currently...