A GIS-based glacier inventory for the Antarctic Peninsula and the South Shetland Islands —A first case study on King George Island

The aim of the international project “Global Land Ice Measurements from Space (GLIMS)” headed by the US Geological Survey is to establish a world wide glacier inventory based on satellite imagery. This data set will form a first digital baseline study for future glacier monitoring. The presented GIS-based glacier inventory for King George Island is a case study for the area of the Antarctic Peninsula. In the database of the glacier inventory topographic information, specific glaciological parameters as well as metadata will be included. The topographic data consists of drainage basin limits, basin areas, altitudinal ranges, perimeters and mean lengths. Glaciological data sets should comprise information on glacier retreat in different periods, glacier velocities, ice thickness and bedrock topography as well as derived parameters. Modelled and measured mass balance parameters could be included as additional data layers. In particular, these metadata records must comprise background information on data accuracy and data sources and should be compatible with a future data model for the King George Island GIS (KGIS). Three examples illustrate that the GLIMS database will not only contain information valuable for glaciological applications, but also other environmental studies on the island will benefit from this standardised remote sensing data sets. Therefore, a very close link between the data models of KGIS and GLIMS has to be established to enable these synergisms. Finally, better access to historic aerial photography would enable a continuous record of glacier retreat from the beginning of the 1950's onward.     

The Problem of Double Longitudes on Glavač’s Map

Abstract

Exploring large volumes of geospatial data is difficult. This paper presents an approach that combines visual and computational analysis to make this process easier. This approach is based on the effective application of computational algorithms, such as the Self-Organizing Map (SOM). These are used to uncover the structure, patterns, relationships and trends in the data, and for the creation of abstractions where conventional methods may be limited. In addition, graphical representations are applied to portray extracted patterns in a visual form that allows for better understanding of the derived structures and possible geographical processes, and should facilitate knowledge construction.     

Application of SWACI products as ionospheric correction for single-point positioning: a comparative study

In Global Navigation Satellite Systems (GNSS) using L-band frequencies, the ionosphere causes signal delays that correspond with link related range errors of up to 100 m. In a first order approximation the range error is proportional to the total electron content (TEC) of the ionosphere. Whereas this first order range error can be corrected in dual-frequency measurements by a linear combination of carrier phase- or code-ranges of both frequencies, single-frequency users need additional information to mitigate the ionospheric error. This information can be provided by TEC maps deduced from corresponding GNSS measurements or by ionospheric models. In this paper we discuss and compare different ionospheric correction methods for single-frequency users. The focus is on the comparison of the positioning quality using dual-frequency measurements, the Klobuchar model, the NeQuick model, the IGS TEC maps, the Neustrelitz TEC Model (NTCM-GL) and the reconstructed NTCM-GL TEC maps both provided via the ionosphere data service SWACI (http://swaciweb.dlr.de) in near real-time. For that purpose, data from different locations covering several days in 2011 and 2012 are investigated, including periods of quiet and disturbed ionospheric conditions. In applying the NTCM-GL based corrections instead of the Klobuchar model, positioning accuracy improvements up to several meters have been found for the European region in dependence on the ionospheric conditions. Further in mid- and low-latitudes the NTCM-GL model provides results comparable to NeQuick during the considered time periods. Moreover, in regions with a dense GNSS ground station network the reconstructed NTCM-GL TEC maps are partly at the same level as the final IGS TEC maps.     

An integration-based estimation approach for the determination of slug test parameters under various flow geometries

A simple parameter estimation procedure, designated as integration-based estimation (IBE), was introduced to determine the hydraulic properties of an aquifer using slug test models subjected to certain flow geometries such as radial and spherical flows. The basic idea behind the proposed IBE approach is to link an integration value at pre-defined normalized head levels for field data with that of a theoretical type curve. The IBE method removes the need for the implementation of the classical graphical matching process which would be ineffective to acquire aquifer parameters for non-ideal aquifer conditions. As the second aspect of this study, a new decision tool was suggested to determine the suitable slug test model to be utilized for the site data since diagnosing the flow character properly is of crucial importance for following a convenient analysis procedure. The estimation performance and limitation of the proposed IBE method were tested for several slug test scenarios including radial and spherical flow models with a number of synthetically generated data sets as well as a field application. Results reveal that the IBE together with the identification methodology not only is able to retrieve aquifer parameters as reliable as the existing techniques in the literature but also diagnoses the flow character precisely as demonstrated in this study.     

Removal of heavy metal ions from drinking water by alginate-immobilised <Emphasis Type="Italic">Chlorella sorokiniana</Emphasis>

This paper investigates the potential of alginate-immobilised Chlorella sorokiniana for removing Cu²⁺, Ni²⁺ and Cd²⁺ ions from drinking water solutions. The effects of initial metal concentrations, contact times and temperatures on the biosorptions and removal efficiencies of the tested metals were investigated at initial pH values of 5, and pH effects were studied within the range of 3–7. When studying the effects of initial metal concentrations, the highest experimental removal yields achieved for Cu²⁺, Ni²⁺ and Cd²⁺ ions were 97.10, 50.94 and 64.61 %, respectively. The maximum biosorption capacities obtained by the Langmuir isotherm model for the biosorptions of Cu²⁺, Ni²⁺ and Cd²⁺ ions by alginate-immobilised C. sorokiniana were found to be 179.90, 86.49 and 164.50 mg/g biosorbent, respectively. The experimental data followed pseudo-second-order kinetics. At an initial metal concentration of 25 mg/L, immobilised algae could be used in at least 5 successive biosorption–desorption cycles. SEM and EDS analyses revealed that the metals bonded to the biosorbent. Bi- and multi-metal systems of Cu²⁺, Ni²⁺ and Cd²⁺ were investigated at initial metal concentrations of 30, 50 and 100 mg/L. The removal of Cd²⁺ as well as Ni²⁺ in such systems was negatively affected by the presence of Cu²⁺. The removal efficiency for Cu²⁺ in multi-metal systems decreased by 5–7 %, whilst in the cases of Cd²⁺ and Ni²⁺ the efficiencies decreased by up to 30 %. Nevertheless, the results obtained show that alginate-immobilised C. sorokiniana can efficiently remove the metals tested from polluted drinking water sources.     

A critical evaluation of using bulk sediment instead of fine fraction in environmental marine studies, investigated on example of Rijeka harbor, Croatia

This work tested the preferential use of fine (<63 μm) or bulk sediment (<2 mm) in environmental research of marine sediments in the Eastern Adriatic. Fine fraction sediment containing silt and clay (<63 μm), predominating in the studied area, was examined to evaluate past and present anthropogenic inputs and to test our hypothesis that investigation of bulk sediment should be preferred. Following aqua regia digestion, chemical analyses of 58 elements were performed by ICP/OES, ICP-MS and cold vapor AAS, and statistical analysis was performed. The concentrations of the majority of the analyzed elements increased with age of the sediment, except for Ag and Sn, which had higher concentrations in recent sediments. The previous main sources of metal contamination in Rijeka harbor were now abandoned municipal-sewage outflow and oil refinery, and continuing harbor activities and antifouling paint use. All activities except of antifouling paint use have been decreasing significantly. Anomalies of selected elements were determined by the box-plot method. More anomalies were found in the bulk sediment than in the fine fraction. Results of Q-modality clustering and factor analysis in the fine fraction almost correlate with that applied on bulk sediments. Thus, it can be said that the differences between the element distribution in the bulk and fine fraction are not statistically significant. Our conclusion is that analysis of bulk marine sediment gives a better insight into the state of pollution and supports previous recommendations to use bulk sediment as a chosen media for environmental studies.     

Die Kristallstruktur des Minerals Eclarit, (Cu,Fe) Pb9Bi12S28

Zusammenfassung Die Kristallstruktur des zuerst vonPaar, Chen undMeixner beschriebenen neuen Minerals wurde an der Originalprobe bestimmt. Für die prinzipielle Lösung der Struktur war eine Kombination von direkten und Pattersonmethoden erforderlich. Anhand von 2774 kristallographisch unabhängigen Röntgenreflexen (davon 1828 beobachtet) wurde die Struktur bis zu einem gewichtetenR-Wert von 10.7% isotrop verfeinert. Das Mineral ist orthorhombisch, RaumgruppePnma mit den Gitterkonstantena ₀=54.76Å,b ₀=4.030 Å,c ₀=22.74 Å undZ=4. Die Kristallstruktur ist durch galenitähnliche Bereiche, deren [110] Richtung parallel zurb ₀-Achse verläuft, gekennzeichnet. Die gegenseitige Anordnung dieser Bereiche ist teils kobellit-, teils cosalitähnlich. Die galenitähnlichen Bereiche sind vorwiegend wismuthhaltig (Koordination 3+2+1), während die Ph-Atome in einer trigonal-prismatischen Koordination mit 2 zusätzlichen Schwefelatomen vorwiegend als Bindeglieder dazwischen liegen.

---

The crystal structure of eclarite, (Cu,Fe)Pb₉Bi₁₂S₂₈

Summary The crystal structure of the new mineral eclarite, first described byPaar, Chen andMeixner was determined using the original material. It was necessary to apply a combination of direct and Patterson methods. The structure was refined for 2774 independent reflections (1828 observed) with isotropic temperature factors to a weightedR-value of 10.7%. Eclarite crystallizes in the orthorhombic space groupPnma with lattice parametersa ₀=54.76 Å,b ₀=4.030 Å,c ₀=22.75 Å,Z=4. The structure is characterized by galena-like building units with [110] (galena) parallel to theb-axis. These units are linked to each other partly as in kobellite, partly as in cosalite structures. Bi prefers to occupy the metal positions in the galena-like units, coordinated by 3+2+1S, whereas Pb occupies preferably the positions coordinated trigonal prismatic with two additional S. The latter groups serve to connect the galena-like units.

---

---

Mit 3 Abbildungen

---

Herrn Professor Dr.Josef Zemann zum 60. Geburtstag gewidmet.     

Lead-arsenic soil geochemical study as an exploration guide over the Killik volcanogenic massive sulfide deposit, Northeastern Turkey

A mountainous terrain, the eastern Pontide tectonic belt, located in northeastern Turkey, contains more than 60 known volcanogenic massive sulfide (VMS) deposits that differ in reserves (0.1–30 million tonnes) and grades. Soil geochemistry is conventionally used in exploration programs to discover concealed VMS deposits in the region. In the present study, Pb and As element pair were used as pathfinder elements to investigate the relationship of their anomalies to a completely delineated ore deposit (Killik VMS deposit) in an orientation survey that served as a natural physical model. Two hundred forty soil samples were analyzed in the present study. The two elements, which represent the opposite ends of the mobility range, revealed high contrast and overlapped each other at the location of the ore deposit due to enhancement of the anomalies by hydromorphic dispersion, which is an indication that soil samples would produce reliable results. The successful delineation of the deposit is remarkable considering the rough topography and the climatic limitations. Previously the extremely moist and temperate climate was thought to cause excessive leaching of the trace element pathfinders from the ore deposits to produce extensive anomalies usually extending away from the mineralization thus, leading to erroneous results and/or extensive anomalous areas. But the present research has shown that the method can be used effectively if the sampling and data evaluation is carefully conducted.     

Ab initio calculated electron densities for tetrahedral sheet [H2Si2O5]∞ in phyllosilicates

Periodic ab initio Hartree-Fock LCAO calculations have been carried out on the two dimensional sheet of SiO₄ tetrahedra, representing one of the basic constituting units of layer silicates, using Huzinaga's DZP basis sets. The influence of the basis set on the chemical bonding picture is characterized by Mulliken atomic charges and by electron density maps. Silicon atomic charges +1.6 ¦e¦ are more realistic than those +2.4 ¦e¦ reported for smaller basis sets. The silicon d orbital population is found to be 0.6 in close agreement with molecular data. Electron density maps indicate the absence of charge density in the center of the ditrigonal cavity. The charge buildup of nonbonding basal oxygen orbitals is directed mainly downwards perpendicular to the sheet plane.     

Biomarker distributions as indicators for the depositional environment of lacustrine sediments in the Valjevo-Mionica basin (Serbia)

In this study, the molecular composition and biomarker distribution of lacustrine sediments from Val-1 drillhole in the central zone of the western part of the Valjevo-Mionica basin were investigated at depth interval of 0–400 m. Former investigations have shown that the core material can be separated into six depth intervals based on bulk geochemical, mineralogical and sedimentological characteristics. Concerning the quality of organic matter, presence of specific minerals, and high salinity and anoxicity, or alkalinity, three zones are of highest interest, defined at depth intervals of 15–75 m (A), 75–200 m (B) and 360–400 m (F). The first aim of the study was to identify which biomarkers characterize these specific intervals. The second aim, addressing the transitions zones of these intervals, was to extend the changes in the characteristics of the organic substance, to reflect the changes of conditions in the depositional environment as well as to define biomarker parameters which are the most sensitive sedimentological indicators.The sediments from the hypersaline anoxic and alkaline environment show high contribution of algal precursor biomass, what is in accordance with the good quality of organic substances in the sediments from these zones. High squalane content and low content of regular isoprenoid C₂₅ are typical for hypersaline anoxic environment, whereas sediments from alkaline environment have high regular isoprenoid C₂₅ content.Transition to specific sedimentation zones is characterized by change in total organic matter content, and of both free and pyrolysis-derived, and change in hydrogen index value. In the biomarker distributions, more significant changes were detected in distributions of n-alkanes and isoprenoids, compared to polycyclic alkanes. The most intensive changes in alkane distribution are reflected in changes in n-C₁₇ content compared to n-C₂₇, and phytane compared to n-C₁₈. In addition, significant sensitivity was seen in ratios between squalane and n-alkane C₂₆ (hypersaline depositional environment), or isoprenoid C₂₅ and n-alkane C₂₂ for high alkalinity environment.This study showed that Sq/n-C₂₆ ratio can be used to assess the quality of organic substance in immature lacustrine sediments.